ISO Update

Supplement to ISOfocus

June 2015

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 22 / Road vehicles
ISO/CD 15118-7 / Road vehicles — Vehicle to grid communication interface — Part 7: Network and application protocol requirements for wireless communication
TC 23 / Tractors and machinery for agriculture and forestry
ISO/CD 20383 / Tractors and machinery for agriculture and forestry — Speed Identification Symbol (SIS)
ISO/CD 25119-1 / Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development
ISO/CD 25119-2 / Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase
ISO/CD 25119-3 / Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software
ISO/CD 25119-4 / Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes
TC 25 / Cast irons and pig irons
ISO/DTR 945-3 / Microstructure of cast irons — Part 3: Matrix structure
TC 28 / Petroleum products and related products of synthetic or biological origin
ISO/CD 2592 / Determination of flash and fire points — Cleveland open cup method
TC 31 / Tyres, rims and valves
ISO/CD 29802 / All terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings
TC 38 / Textiles
ISO/CD 10325 / Fibre ropes — High modulus polyethylene — 8-strand braided ropes, 12-strand braided ropes and covered ropes
TC 45 / Rubber and rubber products
ISO/CD 3949 / Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification
ISO/CD 2930 / Rubber, raw natural — Determination of plasticity retention index (PRI)
ISO/CD 19846 / Reclaimed rubber — Coding and classification system
ISO/CD 2321 / Rubber threads — Methods of test
ISO/CD 20058 / Rubber thread — Specification
TC 54 / Essential oils
ISO/CD 3054 / Essential oil of lavandin Abrial (Lavandula angustifolia Miller x Lavandula latifolia Medikus), French type
TC 58 / Gas cylinders
ISO/CD 13769 / Gas cylinders — Stamp marking
TC 59 / Buildings and civil engineering works
ISO/CD 6707-3 / Buildings and civil engineering works - Vocabulary — Part 3: Sustainability terms
TC 71 / Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 13315-4 / Environmental management for concrete and concrete structures — Part 4: Environmental design of concrete structures
TC 83 / Sports and other recreational facilities and equipment
ISO/CD 23537-1 / Requirements for sleeping bags — Part 1: Thermal and dimensional requirements
ISO/CD 23537-2 / Requirements for sleeping bags — Part 2: Fabric and material properties
TC 84 / Devices for administration of medicinal products and catheters
ISO/CD 11608-4 / Needle-based injection systems for medical use - Requirements and test methods — Part 4: Needle-based injection systems containing electronics
ISO/CD 11608-6 / Needle-based injection systems for medical use — Requirements and test methods — Part 6: Bolus Injectors
TC 94 / Personal safety -- Protective clothing and equipment
ISO/CD 13982-1 / Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
ISO/CD 17491-2 / Protective clothing — Test methods for clothing providing protection against chemicals — Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
TC 131 / Fluid power systems
ISO/DTS 18409 / Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
TC 150 / Implants for surgery
ISO/CD 19227 / Cleaning of orthopedic implants - General Requirements
ISO/CD 19213 / Implants for surgery — Test methods of material for use as a cortical bone model
TC 164 / Mechanical testing of metals
ISO/CD 20064 / Test method for brittle crack arrst toughness, Kca
TC 165 / Timber structures
ISO/CD 22157-1 / Bamboo — Determination of physical and mechanical properties — Part 1: Requirements
TC 173 / Assistive products for persons with disability
ISO/CD 15621 / Urine-absorbing aids — General guidelines on evaluation
TC 182 / Geotechnics
ISO/CD 14688-1 / Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description
ISO/CD 14688-2 / Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification
ISO/CD 14689-1 / Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification and description
TC 206 / Fine ceramics
ISO/CD 17561 / Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO/CD 20808 / Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
TC 209 / Cleanrooms and associated controlled environments
ISO/CD 14644-13 / Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications
TC 219 / Floor coverings
ISO/CD 6347 / Textile floor coverings — Consumer information
TC 229 / Nanotechnologies
ISO/DTS 19006 / DCFH-DA assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production
ISO/DTS 19590 / Nanoparticles — Detection and characterization using single-particle ICP-MS
IEC/CD 62565-3-1 / Nanomanufacturing — Material specifications — Part 3-1: Graphene — Blank detail specification
TC 292 / Security
ISO/CD 22319 / Societal security — Guidance for involving volunteers in the response to major incidents
JTC 1 / Information technology
ISO/IEC/IEEE CD 12207-2 / Systems and software engineering — Software life cycle processes — Part 2:
ISO/IEC CD 18013-5 / Personal Identification — ISO Compliant Driving Licence — Part 5: Mobile Driving Licence Application
ISO/IEC PDTS 18508 / Information technology — Additional Parallel Features in Fortran
ISO/IEC CD 23009-5 / Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 5: Server and network assisted DASH (SAND)
ISO/IEC CD 30134-5 / Information Technology --- Data Centres Data Centres — Key Performance Indicators — Part 5: IT Equipment Utilization for Servers (ITEU_SV )
DIS circulated
Period from 01 May to 31 May 2015
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 6 / Paper, board and pulps
ISO/DIS 8254-3 / * / Paper and board — Measurement of specular gloss — Part 3: 20 degree gloss with a converging beam, TAPPI method / 2015-08-26
(Revision of ISO 8254-3:2004)
TC 8 / Ships and marine technology
ISO/DIS 13073-3 / * / Ships and marine technology — Risk assessment on anti-fouling systems on ships — Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal process / 2015-08-08
TC 20 / Aircraft and space vehicles
ISO/DIS 18202 / * / Space data and information transfer systems — Mission operations message abstraction layer / 2015-08-08
(Revision of ISO 18202:2013)
ISO/DIS 20618 / * / Space data and information transfer systems — Spacecraft onboard interface services — Device enumeration service / 2015-08-05
ISO/DIS 22642 / * / Space data and information transfer systems — TC synchronization and channel coding / 2015-08-07
(Revision of ISO 22642:2005, ISO 22642:2005/Cor 1:2007)
TC 22 / Road vehicles
ISO/DIS 6621-1 / * / Internal combustion engines — Piston rings — Part 1: Vocabulary / 2015-08-08
(Revision of ISO 6621-1:2007)
ISO/DIS 12619-4 / * / Road vehicles — Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components — Part 4: Check Valve / 2015-08-09
ISO/DIS 12619-5 / * / Road vehicles — Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components — Part 5: Manual cylinder valve / 2015-08-09
TC 23 / Tractors and machinery for agriculture and forestry
ISO/DIS 25358 / * / Crop protection equipment — Droplet-size spectra from atomizers — Measurement and classification / 2015-08-21
ISO 11450:1999/DAmd 1 / * / Equipment for harvesting and conservation — Round balers — Terminology and commercial specifications — Amendment 1 / 2015-08-12
ISO/DIS 3767-1 / * / Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols / 2015-08-12
(Revision of ISO 3767-1:1998, ISO 3767-1:1998/Amd 1:2008, ISO 3767-1:1998/Amd 2:2012)
ISO/DIS 3767-2 / * / Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery / 2015-08-12
(Revision of ISO 3767-2:2008)
ISO/DIS 3767-3 / * / Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment / 2015-08-12
(Revision of ISO 3767-3:1995)
ISO/DIS 3767-4 / * / Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery / 2015-08-12
(Revision of ISO 3767-4:1993, ISO 3767-4:1993/Amd 1:2000, ISO 3767-4:1993/Amd 2:2008)
ISO/DIS 3767-5 / * / Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines / 2015-08-12
(Revision of ISO 3767-5:1992, ISO 3767-5:1992/Amd 1:2001)
ISO/DIS 24631-1 / * / Radiofrequency identification of animals — Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code) / 2015-08-12
(Revision of ISO 24631-1:2009)
ISO/DIS 24631-2 / * / Radiofrequency identification of animals — Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785 / 2015-08-12
(Revision of ISO 24631-2:2009)
ISO/DIS 24631-3 / * / Radiofrequency identification of animals — Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785 / 2015-08-12
(Revision of ISO 24631-3:2009)
ISO/DIS 24631-4 / * / Radiofrequency identification of animals — Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785 / 2015-08-12
(Revision of ISO 24631-4:2009)
TC 29 / Small tools
ISO 21538:2004/DAmd 1 / * / Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering — Amendment 1 / 2015-08-12
TC 35 / Paints and varnishes
ISO/DIS 19396-1 / * / Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane / 2015-08-26
ISO/DIS 19396-2 / * / Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology / 2015-08-26
TC 37 / Terminology and other language and content resources
ISO/DIS 18587 / * / Translation services — Post-editing of machine translation output — Requirements / 2015-08-20
TC 38 / Textiles
ISO/DIS 14362-1 / * / Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres / 2015-08-08
(Revision of ISO 24362-1:2014)
ISO/DIS 14362-3 / * / Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene / 2015-08-08
(Revision of ISO 24362-3:2014)
TC 43 / Acoustics
ISO 389-7:2005/DAmd 1 / * / Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions — Amendment 1: Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions / 2015-08-15
ISO/DIS 7029 / * / Acoustics - Statistical distribution of hearing thresholds related to age and gender / 2015-08-29
(Revision of ISO 7029:2000)
TC 44 / Welding and allied processes
ISO/DIS 3677 / * / Filler metal for soft soldering, brazing and braze welding — Designation / 2015-08-15
(Revision of ISO 3677:1992)
ISO/DIS 15012-4.2 / * / Health and safety in welding and allied processes — Equipment for capture and separation of fume — Part 4: General requirements / 2015-07-08
ISO/DIS 15614-1.2 / * / Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys / 2015-07-22
(Revision of ISO 15614-1:2004, ISO 15614-1:2004/Cor 1:2005, ISO 15614-1:2004/Amd 1:2008)
TC 45 / Rubber and rubber products
ISO/DIS 11424 / * / Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification / 2015-08-21
(Revision of ISO 11424:1996)
ISO/DIS 11759 / * / Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification / 2015-08-21
(Revision of ISO 11759:1999)
ISO/DIS 13775-2 / * / Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications / 2015-08-27
(Revision of ISO 13775-2:2000)
ISO/DIS 247 / * / Rubber — Determination of ash / 2015-08-21
(Revision of ISO 247:2006)
ISO/DIS 289-2 / * / Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 2: Determination of pre-vulcanization characteristics / 2015-08-21