International Energy Journal

Environmental Engineering Association of Thailand

                       

Title Should be Printed with Every First Letter of Every Word Capitalized, Excluding Prepositions and Articles (Times New Roman, Font 14, Bold)

Porkeaw Jaidee1* Torfun Raksa2 and Saipan Piti3 (Times New Romant, Font 8)

7th
International Conference 1May 24-25, 2018

Introduction (Font 10, Bold)

Distinction writing of rational with literature review (if have), objective (Font 10)......

………......

Methodology (Font 10, Bold)

Brief about method used in the study, no need
to detail the analysis method, only refers to the
analysis method (if have) eg. Merk (1995) [1] or ASTM (1996)[2],etc.(Font 10)

……………..……………………………......

….………………………………….…………......

Result and Discussion (Font 10, Bold)

Result and discussion are written together describing only the significant findings with Figure
and Table (if have). Figure and table have to referred
in text.

Example of Figure:

Fig.1 Experimantal diagram

(Font 10, Bold)

Example of Table:

Table 1 Size of Plastic Media (Font 10, Bold)

Type of media / Average
(cm) / SD
Import product / 245.0 / 1.5
Thai product / 249.5 / 1.8

(Font 10 in Table as appropriate)

Conclusion (Font 10, Bold)

Summarize the essence of research study…………

………………………………………….………………

………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………………………………………………….………………

Referrences (Font 10, Bold)

[1]Inthorn, D., Sidtitoon, N., Silapanuntakul, S. and Incharoensakdi, A. 2002.Sorption of mercury, cadmium and lead in aqueous solution by the use of microalgae. Science Asia. 28(3): 253-261.

[2]Polprasert, C. 1996. Organic Waste Recycles. John Wiley & Sons Inc., New York.

7th
International Conference 1May 24-25, 2018

1*Associate Profoessor, Department of Environmental Engineering, Faculty of Engineering, Chiang MaiUniversity, Chiang Mai 50000, Thailand;2Lecturer, Department of Chemical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen 40002, Thailand;

3Graduate student, Department of Environmental Engineering, Faculty of Engineering, Khon Kaen University, Thailand;

Corresponding author: Tel*: ………...... ………,

Fax : …………...... …………..,

e-mail: …………...... …………..

(Font 8)