INSTALATION OF THE VPN

1. You have to connect the computer to the direct output of the DSL to be sure that Internet is activated.

2. Open the browser and verify that Internet is Up. You can do this typing any Internet address on the browser.

3. To connect the router to the output of the DSL and then connect the computer to that router.

4. In the address bar of the browser you might write the following:

http:// 192.168.2.1

After this you would see the following screen:

In the field Password don’t write anything and make a click in the button Login.

5. When you have done a click on the Login button, you will see a screen like this:

6. In the last screen click on Setup Wizard, and you will see a screen like this:

Then click on Fixed-IP xDSL and you will see the following screen.

In this screen you will see all the fields with zeros, but you have to write all the information provided by your ISP in the appropriate fields, and finally click on the button Finish.

7. Then you will see the same screen in step number 6, but in this occasion you have to click on the button Advanced Setup you will see the following screen:

In the left part of this screen click on the option Status and verify that in the column Internet in Cable/DSL says the word Connected which means that Internet is up.

8. If it says Connected, go to step 11, but if it says Disconnected continue all the steps until the last one and start clicking on the button WAN seeing the following screen:

In this screen click on Dynamic IP and click on the button More Configuration.

9. After clicked on More Configuration you will see a screen, in that screen DON’T CHANGE ANYTHING, just click on the button Clone MAC Address and finally press the button Apply to save the changes.

10. To verify that Internet is Up now, click again on the option Status and now you have to see that the internet is Connected, if it is not connect please contact to Boink Support.

11. Then to verify that all the information is correct you have to click on the option VPN and next on the option Ipsec, to this point the information has to be correct.

12. When you have finished the verification , click on the option PPTP of VPN too and you will see the following screen:

In your screen the file of Description has to be empty, so you have to click on the option Edit to create a user:

In the field User name write administrator and in the field password write a, and check the option auto reconnect, finally press the button OK.

Then turn back again to PPTP and press edit to create another user with manager like User name and don’t write password on the corresponding file, be sure that the option auto reconnect is clicked, finally click again the button OK.

13. Finally your screen will be the same that step 12, be sure that the fields Accept to connect of the two users created are checked and then press the button Apply.

14. The last step is to verify again the Status to be sure again that the Internet is connected.

Special Case: Sometimes the Modem DSL will have properties of router, so if this happen please contact your ISP to disability this option, if not this will cause conflicts with the VPN Router.

CONFIGURING THE LAN PORTION OF THE VPN

15. Next you have to setup the LAN IP addresses of the VPN.

16. Return to the Advanced Setup Screen and click (on the left hand menu) on LAN.

The LAN screen asks you to enter the LAN IP address of the VPN as well as the Lease Time and Address Pool for the DHCP IP address.

Please set the following:

IP Address: 10.1.12.53

IP Subnet Mask: 255.255.255.0

DHCP Server: (x) Enabled

Lease Time: Two Weeks

IP Address Pool

Start IP: 10.1.12.60

End IP: 10.1.12.79

Domain: ______(blank)

And then Hit the APPLY button.

17. The SMC will ask you “Are you sure?” hit “yes” and then the SMC will upload the data to the VPN.

From then on to reconnect to the VPN configuration you must use this new LAN IP address in your browser to attach:

http://10.1.12.53/

CONFIGURING THE WAN PORTION OF THE VPN

18. Return to the Advanced Setup Screen and click (on the left hand menu) on WAN.

The WAN screen asks which type of IP address the WAN has so click on

/ Dynamic IP / Obtains an IP address automatically from your service provider.
/ PPPoE / PPP over Ethernet is a common connection method used for xDSL.
/ Static IP Address / Uses a static IP address. Your service provider gives a static IP address to access Internet services.

And then hit “More Configuration”

Then it asks:

Has your Service Provider given you an IP address and Gateway address?

IP address assigned by your Service Provider : / . . .
Subnet Mask : / . . .
Service Provider Gateway Address : / . . .

Enter the appropriate IP’s:

WAN IP: 65.40.146.75

Subnet: 255.255.255.192

Gateway: 65.40.146.65

Then hit the APPLY button.

19. Then go to the DNS sub-tab of the WAN menu the VPN which asks:

Has your Internet service provider given you a DNS address?
Domain Name Server (DNS) Address / : / ...
Secondary DNS Address (optional) / : / ...

Enter the appropriate IP’s:

DNS: 204.117.214.10

Secondary: 199.2.252.10

Then hit the APPLY button.

Lastly, you need to enable the basic FIREWALL. Select Firewall off the main menu and select Enable:

Enable or disable Firewall module function: Enable Disable

Then hit the APPLY button.

20. Finally, make sure everything is okay by going to the Status tab off the main menu and make sure all the address and values are correct and that the status reads CONENCTED.