Technical Data Sheet
Indu-Tek Aquamarine HDT
A premium quality, semi-synthetic, waterproof EP grease for extreme wet and salt water conditions in marine and other hostile industrial applications
Aquamarine HDT is a semi-synthetic waterproof grease for lubricating slow to medium speed plain and antifriction bearings especially in wet or saturated conditions, for salt water, marine and other hostile applications. Aquamarine HDTis extremely adhesive and will stick to the lubricated components, whilst displacing and resisting water to elongate component life.
Applications: -
Industrial, Marine and Mining: All slow to medium speed, high load, plain and anti-friction bearings, general machinery lubrication points in extremely wet environments, including salt water applications. Bearings in water industry and marine applications including bearing grease for boat trailers
Features and Benefits: -
Water proof in salt and fresh waterEnsures maximum grease life in wet environments
Excellent sealing propertiesResistant to ingress of dirt and moisture
Excellent dewatering propertiesEnables application to wet surfaces
Corrosion resistantExtends component life in wet conditions
Extreme Pressure additivesProtects components against wear
Highly adhesive and tackyResists vibration and shock loads
Method of Application: -
Aquamarine HDTcan be applied by hand, or by using a standard grease gun, or via a central lubricating system designed for and capable of pumping a NLGI No.2 grease.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application.
Part Number:11522
Indu-Tek Aquamarine HDT
A premium quality, semi-synthetic, waterproof EP grease for extreme wet and salt water conditions in marine and other hostile industrial applications
Typical Characteristics and properties
Appearance-Smooth, adhesive grease
Colour-Green
NLGI classification(IP50)-2
Thickener-Lithium soap
Base oil- Semi-synthetic
Base oil viscosity @ 40C (IP71) cSt-1000 cSt
Dropping point (ASTM D2265) oc-185oc minimum
Water Resistance (DIN 51807)-Fully Resistant
Copper corrosion (IP 112)-Pass
Resistance to corrosion Emcor (IP 220) -0:0
Water washout (IP215) @ 39C %-2.5%
Four Ball Weld Load (IP239) kg-260 kg
Timken OK load (IP 326) kg -20kg
Operating temperature range--10oc to +140oc
The content of this data sheet is given in good faith but without warranty
Units 2 & 3, Mayfield Industrial Park, Liverpool Road, Irlam, Manchester, M44 6GD, United Kingdom
Tel: +44 161 777 9970Fax: +44 161 777 9970
email: