HVAC CNC PLASMA SYSTEM
Our plasma cutting system was developed specifically for the HVAC contractor/fabricator. It is designed to do all that a user could want and meet the user's budget. Nothing has been sacrificed except cost to our customer. $32,000
CUTTING TABLE FEATURES
* Heavy duty 5'x10', all welded steel construction capable of a 2000 lb load (full sheet of 1"plate)
* 2 1/2" x 60", 16 ga. slats for economical replacement
* Efficient down draft exhaust design, activated & deactivated automatically as cutting starts & stops
* Hinged clean out doors at both ends makes cleanout easy. Slat removal not necessary.
* Top quality Browning 3/4" rack pinion drives
* The finest dual hardened and ground HIWIN#20 linear guide ways
* Heavy duty NEMA 34 motors that automatically square the gantry
(a feature only found on the best cutting tables.)
* Direct drive, high torque motors to eliminate position error found on belt driven tables
* Solid 4"x6" thick wall tube gantry. This light weight, rigid construction means less moving
weight and maximum repeatability
* Gantry drive with 3/4" rack & pinion and dual hardened & ground HIWIN#15 linear guide ways
* Top quality motors and gears delivering position repeatability of approx. .0005"
* Gantry capable of speeds of 1000 IPM
* Precision Drop Head Control
* Torch crash protection.
There is no other machine built that offers the same precision, same rugged construction
or unique features unless it is more than double and even triple the price.
MADE IN THE USA!!
PC MACHINE CONTROLLED
Machine is equipped with and controlled by a standard laptop, replaceable locally. No
proprietary components over which the user is "held ransom" later.
(All computer specifications are subject to current, over the counter availability
SOFTWARE
* Windows tm operating system.
* SHOP DATA HVAC SOFTWARE with:
- Full HVAC fitting library and 3-D viewing of parts
- Automatic nesting of parts minimizes scrap and maximizes efficiency
- Estimating & costing functions
- Cut list
- Over 60 common geometric shapes
- Label printing, and MORE
* Very user friendly. If you know HVAC sheet metal, this software will "talk to you"
Truly the most advanced and complete software package offered in the industry
TRAINING & SUPPORT
* Us at your shop or you at our shop (we'll fly you to California!) San Diego is NICE!!
* Free telephone and internet support to the original buyer
PLASMA POWER SUPPLY
* HYPERTHERM POWERMAX 45 - standard (rated 1/4" with piercing)
OPTIONS:
* Router/Insulation Cutter- $5,000
* Hypertherm 85 amp power supply is available (1" rated)- $5,500
WARRANTY Limited one year, parts & labor on table. On other components, manufacture warranty applies.
AVAILABLE FROM YOUR LOCAL SUPPLIER!!!
Sheet Metal Equipment Sales Inc.
Dean P. O'Connell, President
2132 Riverview Dr.
Green Bay, Wisconsin 54303
Phone - (920)-662-9966
Fax - (920)-662-9969