Front Loading Kilns from Cromartie – manufactured in the UK
Front Loading ceramic / pottery kilns are made with high-grade insulation bricks and secondary board to increase thermal efficiency.
A replaceable seal is set into a channel around the front face to maintain the door seal. The Front Face is made from "Hard" insulation bricks to avoid damage caused by knocks and bumps during loading. All of the kiln doors in the CFL range are made of brick.
Elements are manufactured from Kanthal A1.
Each kiln is fitted with a main contactor and a policeman/security contactor as standard.
A “Captive Key” interlock is fitted as standard in compliance of the Health and Safety At Work Act 1974.
· Larger kilns can be made in "Split Form", which enables them to be transported upstairs, through access doors and narrow corridors easily and safely.
· None of our kilns contain Ceramic Fibre.
· Heat fuse and secondary safety contactor fitted as standard..
· Automatic dampers can be fitted to all Front Loading kiln as an optional extra. Please call for further details.
· Kilns carry a 24-month guarantee on all parts excluding the elements and heat fuse.
Front Loading Kilns from Cromartie – manufactured in the UK
MODEL / CAPACITY / CHAMBER SIZEWxDxH / EXTERNAL SIZE
WxDxH / POWER SUPPLY / KW
CFL12 / 0.42 cu.ft
12 lts / 9x9x9(in)
23x23x23(cm) / 16x20x22.5(in)
41x51x57(cm) /
240V - 13A / 2.5
CFL30 / 1.40 cu.ft
31 lts / 12x15x13.5(in)
30x38x34(cm) / 22x26.5x27(in)
56x67x69(cm) /
240V - 13A / 3
CFL90* / 3.2 cu.ft
90 lts / 15x21x18(in)
38x53x46(cm) / 27.5x34x60(in)
70x87x152(cm) / 240V - 30A & N
415V - 15A & N / 6
(7)
CFL140* / 4.9 cu.ft
139 lts / 15x21x27(in)
38x53x68(cm) / 27.5x37.5x67(in)
70x98x170(cm) / 240V - 30A & N
415V - 15A & N /
7.25
(9.5)
CFL200* / 7 cu.ft
199 lts / 18x23x29(in)
46x58x75(cm) / 30.5x39.5x67(in)
78x100x170(cm) / 240V - 45A & N
415V - 20A & N /
10
(12)
CFL260 / 9.2 cu.ft
262 lts / 18x23x38.5(in)
45x58x98(cm) / 30.5x39.5x67(in)
78x100x170(cm) / 240V - 60A & N
415V - 20A & N /
13.5
CFL290 / 10.6 cu.ft
285 lts / 18x26.5x38.5(in)
46x67x98(cm) / 31x45.5x70(in)
79x116x178(cm) / 415V - 30A & N / 16
CFL340 / 11.8 cu.ft
335 lts / 20x26.5x38.5(in)
51x67x98(cm) / 33.5x45.5x70(in)
85x116x178(cm) / 415V - 30A &N / 16
CFL350 / 12.5 cu.ft
353 lts / 24x30x30(in)
61x76x76(cm) / 37x46.5x70(in)
94x118x178(cm) / 415V - 30A &N / 18.5
CFL460 / 15 cu.ft
462 lts / 24x30x36(in)
61x76x91(cm) / 37x46.5x70(in)
94x118x178(in) / 415V - 45A & N / 21.5
CFL500 / 18 cu.ft
510 lts / 24x36x36(in)
61x91x91(cm) / 37x52.5x70(in)
94x149x178(in) / 415V - 45A & N / 25.5
CFL700 / 25 cu.ft
710 lts / 27x36x45(in)
67x91x144(cm) / 40x52.5x77(in)
101x149x 195 / 415V - 45A & N / 32
NB Maximimum Temperature 1300 Centigrade
Front Loading Kilns from Cromartie – manufactured in the UK
Model / Kiln Price£ / Furniture Set
Price £
CFL12 / 1092 / 45
CFL30 / 1677 / 90
CFL90* / 2223 / 197
CFL140* / 2592 / 267
CFL200* / 2790 / 373
CFL260 / 3372 / 499
CFL290 / 4372 / 499
CFL340 / 4852 / 586
CFL350 / 5299 / 673
CFL460 / 5922 / 673
CFL500 / 7124 / 746
CFL700 / 8177 / 839
*NB increased power options available on models indicated
• Single program controller with up to 9 segments
• 1 controlled heating / cooling ramp + 1 soak per segment
• Ideal for glass or ceramics use
• Soak times up to nearly 100 hours
• Ramp rates from 1 to 999°C/hour + full
• Program can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 4 days
• Power failure recovery
• Energy used display
• Standard alarm / safety relay with alarm buzzer
• Complete with wall mounting bracket / holster
3300 Kiln Controllers for Ceramics and Glass
Simple to use the 3300 range of controllers has been developed to provide accurate programming of complex firing processes in a simple user-friendly design.
Powerful Programming accuracy and flexibility are key functions of the 3300. Satisfying most processes that require a series of regulated controlled temperature ramps and timed controller sequences.
Flexibility is the key to the design and use of the 3300 program controller. The operator just selects or by-passes the ramp / dwell and then selects the next segment in the sequence to daisy chain the required number of ramps and dwells until the desired control profile is created.
All prices are ex-works and VAT will be charged where applicable.
ST222 13A Plug / Kilnsitter Upgrade Kit
ST222 Kilnsitter Upgrade Kit - This kit contains all the equipment necessary to upgrade your exsisting 13A Plug in Kiln (presently using a Kilnsitter) to a fully temperature controlled kiln using a ST222 controller.
1 x ST222 Plug in controller ( you choose a 13A UK version or a 16A European Schuko version)
1 x ST222 Wall Bracket / Stand
1 x 6 inch Type "R" Labhead Thermocouple
1 x 2m Thermocouple interconnect cable
1 x User Handbook
1 x Installation Handbook
Free Technical support
ST222 FEATURES:
• Designed for small plug-in kilns (up to 3kW)
• Easy to retro-fit to kilns without controls
• Ideal for glass, enamelling, bead annealing & general ceramics use
• 9 programs - each with up to 9 segments
• 1 controlled heating / cooling ramp + 1 soak per segment
• Soak times up to nearly 100 hours
• Ramp rates from 1 to 999°C/hour + full
• Controlled heating & cooling ramps
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Delayed start facility - up to 4 days
• Power failure recovery
• Energy used display
• Selectable thermocouple types
• Extensive kiln safety monitoring with alarm buzzer
• Complete with bracket for wall mounting or as a desk stand
│Cromarte Hobbycraft Ltd.│Park Hall Road│Longton│Stoke on Trent│ST3 5AY│UK│
email: web:cromartiehobbycraft.co.uk
Tel: 0044 1782 319435 Fax: 0044 1782 599723
Registered No 2011651