For All Wireless Carriers

USER MANUAL

APN SETTINGS

FOR ALL WIRELESS CARRIERS

IN USA

**User Manual in Española, French, Dutch and German is available for Download on Website:

Facebook Page:

Twitter: @iDroidUSA

USA: (215) 589-7118

USA: (713) 574-4737

CANADA: (604) 449-0055

EUROPEAN UNION:+32 487 888 888

Support Email:

Notice

Reproduction or distribution of this manual in any form is prohibited without prior written consent from the Company. The Company retains the right to modify and improve on any product described within this handbook without prior notice. Regardless of the circumstances, the Company shall not assume any liability for any data loss or any other type of losses; or for any special event or accidental damage caused directly or indirectly to or by the device.

The content of this manual is provided as is and does not offer any kind of warranties, express or implied, for the accuracy, reliability of the content including, but not limited to, the implied warranty of merchantability and practical guarantee for a particular purpose unless specified by applicable law. The Company reserves the power to amend or withdraw any clause or warranty, in full, at any time without prior notice in this manual.

The pictures in this manual are for reference only; if any individual picture does not match with the product please refer to the product material provided within this handbook as a standard. Many network functions described in this manual are special services provided by individual Network Service Providers which are independent of the Company. Please consult your Network Service Provider to enable the network functions on your device.

The Company retains the power of final interpretation of this manual. If the content of this manual does not match the description of your phone please contact to your device provider

The Company reserves the right to change product specifications without prior notice

The manufacturer reserves the right to modify the technical product specifications without prior notice

Table of Content

I – Safety Notice 4

II- Getting Started 5

Power Up & Shut Down - 5
Battery Charging - 6
Inserting SIM Cards -6
Connecting to Wireless Carrier11

III – Function Menu12

Contacts - 12
Messaging - 13
Phone Features - 13
Voicemail -15
Memory Card - 15
Wi-Fi - 15
Mobile Internet -16
Bluetooth - 16
Air Gesture - 17
Wake Up Gesture - 17

IV – Applications/Apps

Browser - 18
E-mail - 19
Settings - 20
Camera - 21
Music - 22
File Manager - 22

V – Statement of Toxic & Hazardous Substances - 23

VI – Common Trouble Shooting Tips -24

VII – Frequently Asked Questions -31

VIII- Mobile Internet & MMS APN Settings Guide - 35

IX – Limited Warranty - 60

I - Safety Notice

WARNING: Please read carefully. The manufacturer will not be responsible in case of improper use of the device. The Company reserves the right to revise this manual content without prior notice.

Your Smartphone provides the “Airplane Mode” function by default. You may choose to apply the “Airplane Mode” when travelling by airplane although most airlines recommend that you completely shut your phone down before takeoff. Please follow airline instructions on this matter.

Switch the device off near fuel pumps, chemicals, or any highly flammable or blast prone areas. Keep the device away from the children.

While driving please obey local laws and regulations with regards to Smartphone use. Your Smartphone has a built-in hands-free function which can be used while driving. Under poor driving conditions, please stop the car before you dial or pick up the phone.

Switch off your Smartphone in the hospital or other areas where the use of cellular devices is prohibited. The Smartphones can affect the normal work of electronic equipment and medical devices, such as pacemakers, hearing aids and other medical electronics equipment.

Non-original accessories and components are not provided with repair warranty qualification.

Please do not disassemble your phone by yourself, if your Smartphone is out of order, please contact your supplier.

Please do not charge the Smartphone before battery is installed. This may short-circuit the battery.

Smartphones should be charged in a ventilated and cool environment, away from flammable and explosive materials.

In order to demagnetization your device, please keep the Smartphone away from magnetic material, such as disks, credit card etc.

Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and contact the supplier.

Do not use the Smartphone in temperatures that are too high or too low; do not expose the Smartphone to strong sunlight or high humidity.

Do not use liquid or wet cloth with strong detergent to clean the device.

This Smartphone provides camera, video recording and sound recording functions; please follow the relevant laws and regulations to use those functions. The Company will not be responsible for photographs, video recordings and sound recordings that violate any laws or are taken without proper authorization.

While using the network functions, please be wary of files which may contain viruses, do not install any photos and ring tones which have been damaged. If a virus does occur and affects the device our company will not be responsible.

Please dispose of batteries according to local regulations, please recycle when possible. Please do not dispose as household waste.

ATTENTION:

Charging must be performed in a well-ventilated area with temperatures between -10˚C and +45˚C. The factory charger supplied in the box must be used. Using an unapproved charger could be dangerous in addition to being in breach of the provisions of the repair warranty.

If the mobile phone automatically shuts down, or indicates that “Battery Is Low” you should immediately charge the battery. If the battery has not been entirely used up before charging, the mobile phone will automatically decrease the recharging period.

II - Getting Started

Appearance and Key Function

1. Battery

Initially the battery will be around 50% charged and can be used immediately after unpacking. However for the first cycles, it is strongly recommended to let the battery completely run out before charging again, to allow the device to achieve its optimum capacity.

1.1 Battery Removal and Installation

Installing the battery:

Contact one end of the battery to the connecting grooves until the battery completely snaps in to place in the battery box.

Removing the battery:

Remove the back cover of the phone and gently remove the battery from the battery compartment.

1.2 Battery Charging

When your phone is charging there will be a charge level indicator in the shape of an icon on the phone screen. If charging with the phone powered off the screen will show the charging indicator. If the battery is sorely depleted the icon may take a few seconds to appear on the screen.

When the battery is fully charged the charging icon disappears to indicate that the battery is fully charged. If charging while the phone is powered off, the screen also displays that the charging is complete. During charging, the batteries, cell phone and charger heat up; this is normal.

After charging, disconnect the AC power outlet and phone charger connections.

**Note: It is recommended that the device be placed in an ambient temperature when charging; -10 ℃ ~ +55 ℃; in a well-ventilated place, and to be sure to use the charger provided by the manufacturer. Use of unapproved charger may be dangerous, and it is also a breach of the warranty terms and conditions specified by the manufacturer. If the charging temperature is too high or too low, the phone will automatically go in to alarm mode and stop charging to prevent damage to the battery.

2. Lets Connect to the Wireless Network

2.1 Installation of the SIM Card

Please install the SIM card before using your phone.

Note: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card.

To insert SIM card(s):

Switch off the mobile phone and remove the rear cover and battery. Insert the SIM card(s).

Insert the SD card. (Left slot)

SIM Slot(s)

Memory Card

3. Finally insert the battery and replace the rear cover of the mobile phone.

Power On and Off

On - Please ensure the SIM card has been properly inserted into thephone. Long press the Power key to switch the phone on.

Off - In standby mode, long press on Power key until an optionsmenu appears. Select OFF in the menu and confirm in the pop-up prompt to switch off the phone.

Password Lock

You may set a screen unlock picture or a PIN code lock as a security measure. For further information regarding password locks, password revision and other functions please enter the security settings of the phone.

iDROID Royal V7 accepts Dual SIM Cards and therefore manage 2 different phone numbers and accounts.iDROID Royal V7 will accept a Micro SIM Card (Shown as WCMDA GSM1 SLOT) and Mini Standard Larger Size SIM Card (Shown as GSM2). The slots are located in the back of the phone, above the battery compartment as shown in the photos below.

Before using your phone, you must insert a valid mobile phone SIM card.

The Mini SIM Card (Large Size) goes in the bottom with the Metal Part facing upwards.

The Micro SIM Card (Small Size) goes in top slot as shown.

Everything that has to do with establishing a network connection and information related to such is recorded in the phone card's chip including the names and numbers stored in your address book or contact list. In order to prevent loss and damage to the phone card information you should avoid touching the metal contact surface on the card and place the phone card away from other electric or magnetic devices.

2.2 SIM Card Insertion and Removal

Place the metallic end of the phone card chip parallel with the metal contacts in the card slot of your phone and insert it into the slot. Royal V7 support a single slot for Mini SIM Card and a single slot for Micro SIM Card. Please insert as directed in the photo.

When you need to remove the phone card, power off your phone; remove the battery; and then proceed to gently remove the SIM card.

**Warning: Be sure to power off the device before removing the phone card or it may damage your phone card.

2.3 Memory Card Insertion and Removal

Insert the memory Card into the slot right next to the the SIM Card Slots. Please make sure you insert the memory card into the slot that is indicated as a memory card (the memory card outline will match the memory card diagram shown on the phone).

To remove the memory card lightly press the inserted memory card and it will partly pop out. Remove the card gently from the slot.

2.4 Power Buttons

To power the phone on or off press and hold the power button at the top right corner of your device. If you power on the phone without inserting the phone card there will be a corresponding prompt on the screen. Insert the phone card to boot your device. The screen will display the following prompt:

Enter the PIN – This prompt will show if you have set a password on your phone card.

Find - The phone will initiate search until it finds a suitable network connection.

2.5 SIM Card Unlock

In order to prevent illegal use in case of theft, protect your phone card with a PIN (Personal Identification Number) code encryption. If you have set a PIN code protection, you will be asked to enter your PIN code to unlock the phone card every time you boot. After that the phone can be used as normal.

You can choose not to avail this service and turn the safety feature off but in case of phone theft, the phone card can be illegally used.

When entering the PIN code in your phone, use the ‘DELETE’ key to clear the code at any time in case of wrong entry. Once the code has been entered click the ‘OK’ key to confirm. For example, if the PIN is set to 1234, input the following: 1234 and confirm.

In case of three consecutive incorrect PIN code entries your phone card will go into automatic network lock and will require the PUK code. PUK code is available with your Wireless Service Provider.

If you enter the PIN incorrectly three times, the SIM and PIN codes will be automatically locked. You will need the PUK code to unlock the phone which is available through your service provider. If you enter the PUK code incorrectly 10 times, the SIM card will be permanently locked. Please see your service provider for a new SIM card.

Password visible – Make the password visible when it’s typed.

Select device administration - Add or delete device manager.

Use security credentials - Allow applications to visit security credentials or other credentials.

Install from SD card - Install the encrypted certificate from SD card.

Set password - Set or change Certificate store password

Clear storage - Clear all the contents of the certificate store and reset their passwords.

**Note: Your network provider will set a standard PIN number for your phone card even before purchase. It is advisable that you change the PIN code soon after purchase.

2.5 SIM Card Unlock

You can choose not to avail this service and turn the safety feature off but in case of phone theft, the phone card can be illegally used.

In case of three consecutive incorrect PIN code entries your phone card will go into automatic network lock and will require the PUK code. PUK code is available with your Wireless Service Provider.

Password visible – Make the password visible when it’s typed.

Select device administration - Add or delete device manager.

Use security credentials - Allow applications to visit security credentials or other credentials.

Install from SD card - Install the encrypted certificate from SD card.

Set password - Set or change Certificate store password

Clear storage - Clear all the contents of the certificate store and reset their passwords.

**Note: Your network provider will set a standard PIN number for your phone card even before purchase. It is advisable that you change the PIN code soon after purchase.

2.6 Connecting to the Network

Voice

As soon as you unlock the phone card the phone automatically does a search to find an available network. Once contact is made the interface will pop up the carrier’s information; the status bar will display the signals available and the current state of the network. The network provider’s name is displayed at the top of the lock screen. At this point, your phone is connected to the service network.

**Note: If the lock screen prompts ‘Emergency Calls Only’ it means that you are currently outside the normal network coverage (range) or your card is not verified, but you can still send an emergency call according to the strength of the signal.