Version 2.0

EM78886 Mask Type Ordering FormDate:2007/9/21

Item No.

/ U8886- / Company
Program file / .cds / Checksum
Order Quantity / Delivery date
Project Name / Project No.
Project description:
Pad Option
N/A

Code Option

/DED (Differential energy detect) / □Disable (this bit set “1”) / □Enable (this bit set “0”)
/POVD (power on voltage detect) / □Disable(this bit set “1”) / □Enable (this bit set “0”)
Application status
UseVoltageRange / ~ V / While /POVD is enabled, the operation voltage of MCU must be ranged between 2.0 and 5.5V.
~ V / While /POVD is disabled, the operation voltage of MCU must be ranged between 1.8 and 5.5V.
Crystal: 32768Hz / □check / Datasheet / Version:
Crystal Cap at 22p ~ 27p / □check
LCD status / Duty / Bias / COM / SEG
Key scan / □Disable / □Enable
SPI / □Disable / □Enable
Comparator / □Disable / □Enable
Current DA1/2 / □Disable / □Enable
DED / □Disable / □Enable
Interrupt register using state
Interrupt state / TCIF / □Disable / □Enable
CNT1 / □Disable / □Enable
CNT2 / □Disable / □Enable
INT0 / □Disable / □Enable
INT2 / □Disable / □Enable
RBF / □Disable / □Enable
DED / □Disable / □Enable

1



Version 2.0

EM78886 Mask Type Ordering FormDate:2007/9/21

Input/Output pin status (Mark “” in the adequate blank)
Port5 / Port6
B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / ×note1 / Input / × / × / ×
Output / × / Output / × / × / ×
External pull high / × / Internal pull high / × / × / ×
Port7 / Port8
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / × / × / × / Input
Output / × / × / × / Output
Internal pull high / × / × / × / External pull high
Port9 / PortB
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7 / B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input / Input
Output / Output
External pull high / External pull high
PortC / Set I/O as output for unused I/O pins. Don’t let input pin floating. / □check
B0 / B1 / B2 / B3 / B4 / B5 / B6 / B7
Input
Output
External pull high
Note1: “×” is represented un-exist pin, please don’t write any pin state.
Programming checklist
Working Frequency
(Please fill Function description) / □10.74MHz (upper 3.3V)
□3.579MHz (upper 2.2V)
□1.79MHz (upper 2.0V)
□0.895MHz (upper 2.0V)
□Green mode (upper 1.8V)
□ Idle mode (upper 1.8V)
□Sleep mode (upper 1.8V)
VDD of EM78886must be at 3.3V or above for working at main clock 10.74MHz. / □check
While switching main clock (32768Hz, 0.895MHz, 1.79MHz, 3.58 MHz, 10.74 MHz), adding 6 instructions delay (NOP) is required. / □check
MCU will auto store these value ”R3”,”R5”and “ACC” after interrupt, and reload after the instruction “RETI”. / □check
For Counter1 and Counter2, the initial value will be reload after overflow. / □check
IOCE Page 2 can be written only. / □check
Interrupt flag setting/clear way is matched our suggestion. / □check
Data RAM is used in 2.5K or below. / □check
Stack levels can’t be over 8 levels. / □check

1



Version 2.0

EM78886 Mask Type Ordering FormDate:2007/9/21

Package information
Marking LOGO / □Marking (LOGO on IC):1’s line
2’s line
LOGO is a trademark of customer’s company, please attach authorized letter.
□Marking (LOGO on IC): Standard logo of Elan
Note1:
Development information
Verify Method / Version / Amount
Piggy back / EM78R808
Date code:
OTP / HX/QX: / pcs

Note and Signature

For Customer / For Agent
Note: / Note:
Name: / Name:
Date: / Date:
Telephone: / Telephone:
E-mail: / E-mail:

1



Version 2.0

EM78886 Mask Type Ordering FormDate:2007/9/21

TERMS & CONDICTIONS of WARRANTY AND INDEMNIFICATION

1.THE UNDERSIGNED represents and warrants that（a）it has the proprietary right and title, and/or has been granted all necessary third party licenses, to the digital codes, software, certain designing information, and/or the technical documentation（hereafter refer to Ordering Spec.）thereof, including, but not limited to, the rights to place orders with Elan to design, manufacture, have made, market, sell and promote custom-made products containing such Ordering Spec. in original or variable forms; (b) it is not aware of any rights of any third party from around the world which would or might render the use of any part of the Ordering Spec. unlawful caused by infringing any third party right or breaching legislation enforced in any jurisdiction.

2.THE UNDERSIGNED undertakes, at its expense, to indemnify, defend, protect and hold Elan harmless from and against any and all losses, costs, damages and expenses, including but not limited to, reasonable attorneys' fees and costs resulting from all proceedings, threats of proceedings or claims against Elan, its employees, managers affiliates, subsidiaries, associated companies and respective customers, by any third party for infringement or alleged infringement regarding to the Ordering Spec.provided by THE UNDERSIGNED, or the use thereof, of patents, trademarks, trade secrets, copyrights, and other proprietary rights from around the world.

3. THE UNDERSIGNED shall provide further evidence to proof that the Ordering Spec. complies with the terms and conditions and provide the related code and documents

while the amount of product units is over 2,000,000 pieces per year or under Elan request.

4. Any disputes arising out hereof shall be governed and interpreted according to the laws of the Republic of China and Hsinchu District Court shall have exclusive jurisdiction thereof.

THE UNDERSIGNED:

(Company Name)

By ______

Name:

Title:

Date:

1