Theatre Arts I (T) Fall: Final Exam Review Grueneich 2012
PART I: Vocabulary
Baby Spot
Backing/Masking
Cable
Conflict
Cue
Dim out/up
Dress the Stage
Flat
Floorcloth
Groundplan/Floorplan
Focus
Grid
Grip
Hand Prop
Kill
Platform
Plot
Ramp
Script
Set
Spotlight
Shift
Strike
Warn
PART III: Theatrical Jobs
Producer
Director
Stage Manager
Technical Director
Set Designer
Sound Designer
Lighting Designer
Costume Designer
Business Manager
Publicity Director
Box Office Staff
Ushers
PART IV: Theatre Safety
Please list 5 of the causes of accidents:
What should you do if you find a faulty or questionable tool?
What should you do with a tool when it is not in use?
When is the most dangerous time during a production?
Type of fires?
What type of fires involve petroleum based products? A, B, or C?
Which is the preferred paint? Liquid or Powder?
Rules for clothing in the shop?
Identify the three stages, Thrust, Proscenium, Arena
PART V: LUMBER
PLEASE GIVE THE ACTUAL SIZES OF LUMBER FOR THE FOLLOWING:
1” X 4”
1” X 6”
2” X 10”
2” X 4”
4” X 6”
What are the grades stick lumber?
What are the grades sheet material?
PART VI: POWER TOOLS
Using the following terms; please label the Circular Saw.
Trigger Switch, Tilt lock wing-nut, Power Cord, Handle, Tilting Base, Blade,
Retractable Guard, Clutch, Guard lift handle, Angle Scale.
Using the following terms please correctly label the Portable Drill.
Chuck, Cooling Vents, Housing, Cord Strain Reliever, Switch Lock,
Reversing Switch, Handle, Trigger Switch
PART VII: Measurements and Scale Drawing
Please measure the following lines and label using the appropriate scale and also write the measurement in inches.
In inches and in 1” = 1’- 0” scale, ½” = 1’- 0”, ¼” = 1’- 0”,
1/8” = 1’- 0”, 3/16” = 1’-0”
PART VIII: Hand Tool Identification
Using the Pictures in your packet, Identify the Hand Tools.
Tack Hammer, Phillips Screwdriver, Flat-Blade Screwdriver, Chisel, Circular Saw, Hand Saw, Hack Saw, Jig or Saber Saw, Curved Claw Hammer, Power Drill, Brace, Framing Square, Tri-Square, Twist Bit, Paddle Bit, Hand Staple-gun, goggles, Face shield, C- Clamp, Jorgenson Clamp, Pipe Wrench, Adjustable Wrench, Utility Knife, Bevel Gauge, Pliers, Measuring Tape.