IT 208
Fall 2013
Hydraulics
Syllabus
Instructor:Joseph Jensen
Office: GTA 110
Phone: (775) 753-2015.Cell (775) 761-0051
email: joseph.jensen.gbcnv.edu
Office Hours: M –TH. 12:00pm to 2:00pm
Course Title: / IT 208 Hydraulics.
Course Discipline: / Diesel Technology
Course Description: / Introduce basic hydraulic systems through component recognition, circuit reading and practical application focused on hazard recognition.
Course Prerequisites / None
Course Location: / GTA 120
Course Times: / 7:00am to 12:00pm Monday thru Thursday.
Course Credits: / 8
Textbooks
Required Textbooks: / Heavy Equipment Systems.
Course Goals
Ø Recognize safety hazards.
Ø Identify hydraulic components and their function.
Ø Read a simple hydraulic circuit using ANSI and ISO symbols.
Ø Build a basic hydraulic circuit on hydraulic trainer.
Expected Learner Outcomes
Upon completion of this course students will be able perform the following tasks safely on a hydraulic system.
Ø Describe the safety precautions to be applied when working on hydraulic systems and components. (1),(2),(3)
Ø Define different terms used in a hydraulic system. (1),(2),(3)
Ø Identify graphic symbols for hydraulic components. (1),(2),(3)
Ø Identify and state the function of a hydraulic reservoir and associated components. (1),(2),(3)
Ø Identify and state the function of different types of hydraulic pumps. (1),(2),(3)
Ø Identify and state the function of control valves. (1),(2),(3)
Ø Identify and state the function of hydraulic actuators. (1),(2),(3)
Ø Identify and state the function of different types of hydraulic filters. (1),(2),(3)
Ø Identify and state the function of different hydraulic oils. (1),(2),(3)
Ø Identify hydraulic components and describe flow in a simple hydraulic circuit. (1),(2),(3)
Measurement of Learner Outcomes
(1) Written Examination – Students will be given a quiz at the completion of each section and a
final exam at the end of the class.
(2) Practical Evaluation – Students will be asked to show competence by kinesthetic demonstration.
(3) Verbal – Students demonstrate competence by presenting oral presentations in groups and individually.
Students will be tested for knowledge and skill attainment through written tests comprised of questions taken from handouts, reading assignments, homework and lectures. Laboratory assessments will consist of practical demonstrations and verbal presentations.
.
Method of Instruction
A combination of lecture, discussion, demonstrations and film/video presentations will be used in the classroom training. Hands-on-training will be covered in the shop area on hydraulic trainer, using cut-a-way hydraulic components and disassembly of hydraulic components.
C
Course Requirements
Ø DROP DATE FOR THIS CLASS IS SEPTEMBER 18, 2013. If you chose to drop this class, you will need to do so by this date or you will receive an F for this class.
Ø Safety principles will be covered as pertaining to the subject matter.
Ø Students will complete training on all needed shop equipment.
Ø Students will be required to hand in homework assignments by due date.
Ø Students will be required to hand in shop exercise assignments.
No cell phones, MP3 players and CD players will be allowed.
Violation of this policy will result in a dismissal of class for that day.
Proper PPE will be used.
Attendance Policy: / You are expected to attend all class meetings. Exceptions may be discussed with the instructor with suitable make-up activities agreed upon. All course work is due on the assigned dates whether or not you are present. The instructor assumes no responsibility for making sure you receive any course material for which you were absent.
AFTER BEING TARDY 3 TIMES FOR MORE THAN 5 MINUTES, WILL COUNT AS A ONE ABSENCE. IF YOU ARE TARDEY MORE THAN 1 HOUR THIS WILL COUNT AS A HALF DAY ABSENCE, AND IF 2 HOURS TARDY, IT WILL COUNT AS A FULL DAY ABSENCE. AFTER BEING ABSENT ONE DAY FOR THOSE ON M.T.C PROGRAM YOUR SUPERVISOR WILL BE NOTIFIED. IF YOU MISS MORE THAN 3 DAYS IN A SEMESTER, YOU WILL BE DISMISSED FROM THE DIESEL PROGRAM. THIS APPLIES TO ALL STUDENTS.
Students with Disabilities: / GBC supports providing equal access for students with disabilities. An advisor is available to discuss appropriate accommodations with students. Please contact the ADA Officer (Julie Byrnes) in Elko at 775.753.2271 at your earliest convenience to request timely and appropriate accommodations.
Grading Policy and Grading Scale
Grades will be weighted according to the following scale:
Written Tests and Quizzes 50%
Practical Demonstrations 50%
Grade
A 90% – 100%
B 80% – 89%
C 70% – 79%
D 60% – 69%
F Below 60%