ENZO LOPEZ LABBE
Manuel Verbal 1545 Dpto 1403, Torre IIAntofagasta
908 414 05E – mail:
SUMMARY
Civil electrical engineer, Diploma in maintenance engineering, specialist in control and automation of industrial processes, extensive experience in projects and maintenance of control systems DCS, SCADAS and PLCS, with high level of expertise.
Experience on issues of responsible care, respect the environment, quality (ISO 9000) and reliability, with management skills and leadership.
My strengths include great analytical skills, structured thinking, good planning and proactive.
WORK EXPERIENCE
ENAEX Planta Prillex America, Mejillones May 2009 – until today
Implementation engineer.(Fixedtermcontract)
Support DCS engineering group in preparation for the start-up of the new plant. Preparation for commissioning of equipment and DCS control loops in general, verification of cause and effect matrices, reviewing technical documentation, and removal of non-conformities monitoring.
METHANEXLTDACHILEPuntaArenasfrom2004to2009.
DCS Leader
Responsible for the maintenance of the control system, spare parts management, and development of preventive and predictive maintenance plan for the area.
• Lead the team that conducted the review, debugging, building and improvement plans for preventive maintenance of main equipments over the plant. This work considered incorporating concepts of reliability, availability and maintainability in mind the efficient use of the budget. This team was able to share experiences and ways of working between all the specialties of the department, and also have maintenance plans coordinated.
• Leader of a shift that worked on upgrading the control system to an ancient art. This work was to develop work plans and Gantt charts for the implementation and subsequent monitoring, coordinating work with the production department and supervision of contractors and permanent staff assigned to theproject.
• Development and implementation of preventive maintenance plan for the DCS area. This is the first time that the area has a formal maintenance plan. With this plan you can now have a good estimate of theburdenofannualpreventivework.
• Development of procedures for recovery from catastrophic failures of main control systemcomputers. Before this, there were no formal procedures and a recovery of important equipment maytake many hours and sometimes not all the spare parts required were available.
• Participated as a start-up control engineer in the commissioning and start-up of the last plant built. Involvement with the start-up team gave me a deep technical knowledge of the control system, which was thenusedtotrainmyco-workers.
• Acting as Head area. This allowed me to learn more about management and leadership.
HBENGINEERING(MethanexContractor),PuntaArenasfrom1997to2004.
DCSEngineer (1999-2004)
Responsible for the development of detail engineering and support the maintenance control system team.
• Training to production operators in control system maintenance and basic operation of the control system. This enabled the production department with highly trained operators and a more secure operation.
• Implementation of a testing DCS control system. This parallel system allowed for better training for operators and instrumentation technicians as well as repeat failures to allow DCS engineers to make a better troubleshooting and testchangesbeforeintervening to therealequipment, loweringtherisksofintervention.
• Development of DCS detail engineering, important for the plant. The most prominent are: Over temperature reformation furnace protections, control of common instrumental air header. This increased the reliability of the plant to protect it for flaws that could have been catastrophic.
AssistantEngineering(1997-1999)
In charge of developing DCS work plans and risk analysis.Support and implementation of DCS workorders.
• Develop and implementationof the engineering required to updating the boiler safety PLC. This work helped increase the equipment reliability and control equipment from the control room.
EDUCATION AND TRAINING
Diploma in Engineering Maintenance, UTFSM, 2007
Civil Electrical Engineering, University of Magallanes, 2001
Field Electrical Engineering, University of Magallanes, 1997
LANGUAGES
English reading and writing at an advanced level, Intermediate level spoken.
COMPUTERS
Advanced userlevel management of Word, Excel, PowerPoint, SCADA CITECT, ENVOX.
User level management of MS Project, Autocad, Matlab, Maximo, ProjectWise, PI Systems, VMS.
TEACHING EXPERIENCE
Par time Professor of "Industrial Automation" to the career of Technical University in Electronics, University of Magallanes, Punta Arenas, 2001.
OUTSIDE WORKING HOURSRELEVANT ACTIVITIES
President of“Club de Campo Leñadura” – Paddle branch, 2008 period.
Organization of numerous tournaments paddle in conjunction with the Club de Campo "Leñadura.
Manager of development in Punta Arenas of diploma "Maintenance Engineering", issued by the University Federico Santa María.
RELEVANTTECHNICAL EXPERTISE
PROVOX DCS control systems, DELTA V. PLCs Modicon, Siemens, Allen Bradley, Triconex. CITECT SCADA, Wonderware. Electrical variables monitoring: ION, MICOM, PQM. Communications and networking: Ethernet, TCP / IP, Modbus, RS-232/485, OPC, DDE. Tuning control loops, cascade loops. Using of maintenance management software MAXIMO.
APPENDIX COURSES AND TRAINING.
* SIEMENS, SGT-200 Gas Turbine Operations and Maintenance training course ", Punta Arenas, 2007.
* NEW HORIZONS "Maintaininig and Managing Microsoft Windows Server 2003 Environment", Santiago, 2007.
* NEW HORIZONS, "Implementing a MS Windows Server 2003 Network Infrastructure, Santiago, 2007.
* EMERSON PROCESS, Delta V System Administration, Austin Texas, 2006.
* EMERSON PROCESS, "Delta V Progress Graphics, Austin Texas, 2006.
* TREGOE Kepner, "Solving problems and making decisions - PSDM, Punta Arenas, 2006.
CHILE * ROCKWELL, Scheduling, Maintenance and troubleshooting in PLC-5 using RSLogix 5, Santiago, 2005.
* Induro, "Training and skills in producing plants Gas Air Safety and Maintenance", Punta Arenas, 2005.
* LITORAL LTDA, "Use of Portable Fire Extinguishers", Punta Arenas, 2004.
* INVENSYS "Tricon Maintenance TS 1131", Santiago, 2004.
* INVENSYS, "Comprehensive Tristation 1131", Santiago, 2004.
DDI * TARGET, "Making a Difference and Empowerment", Punta Arenas, 2004.
* ACHS, "Defensive Driving", 2004.
* EMERSON PROCESS, "Delta V Operate Implementation", Austin Texas, 2004.
* EMERSON PROCESS, "Delta Hardware V & Troubleshooting", Austin Texas, 2004.
* BERMAT, "Using PROWORX", Punta Arenas, 2003.
* INECO, "System Configuration Control DELTA-V", Punta Arenas, 2003.
* INECO, "Operation of the control system DELTA-V", Punta Arenas, 2003.
* CONTROL CHALLENGE "Basic PLC Programming Triconex, Tricon System Version 8, and using Tristation", Punta Arenas, 1998.
ENZO LOPEZ LABBE- 1 -
908 414 05 E – mail: