For More Information, Please Contact Us Toll Free at (888)790-9033

For more information, Please contact us Toll Free at (888)790-9033

#5045
Logemann 2 Ram
With
#5067 Infeed Conveyor / 345AT 2 Ram Baler SN 14671
w/ Infeed Conveyor
16" Main Cylinder, 200 HP
12" Ejector Bales: 36" x 36”
Bale Weight: 1400 lbs of OCC
Wire Tier: L&P 330 / $75,000.00
As Is Where Is / FOB: Waco, TX
#4628
Harris HRB-1E Baler / S/N1256
Handyman Special. Needs work / $10,000.00
As Is Where Is / FOB: Waco, TX
#4796
Harris HRB-1C Baler / S/N1345
Handyman Special. Needs work / $10,000.00
As Is Where Is / FOB: Waco, TX
#4952
Maren Manual Tie Baler / Maren Manual Tie Baler
DOM 1972 Serial # 1260 / $7,500.00 / FOB: Waco, TX
#5080
Tennessee Industrial Conveyor / Steel Belt Conveyor
11’ Lower 24’ Incline / $8,000.00
As Is Where Is / FOB: Waco, TX
#5081
Quality Sort Belt Conveyor / Rubber Chain Belt
58” W 18’6” L / $2,500.00
As Is Where Is / FOB: Waco, TX
#4957
Incline Slider Belt Conveyor / conveyor 14' long belt 30" w
(37" w - total size) / $2,500.00
As Is Where Is / FOB: Waco, TX
#4677
MacPress Baler / 110 Mac Press Auto Tie Baler / $62,000.00
As Is Where Is / Ex works: GA
#3583
Cram-A-Lot Compactor 1.6 YD / C001 CP6172 DOM 5-4-99 / $1,500.00
As Is Where Is / FOB: Waco, TX
#4954
International Horizontal Baler / Open End Auto Tie
Baler S/N 0607044
Model No. AT484310 / $64,000.00
As Is Where Is / FOB: Waco, TX
#4955
Marathon TR10 / One (1) Used Marathon TR10 2 Ram Baler S/N 118241
w/ Accent 470 Wire Tier / $61,000.00
As Is Where Is / FOB: Waco, TX
#3676
Platforms, Stairs, & Equipment / Platforms, Stairs, & Equipment
Call for prices for separate pieces. / $4,500.00 For ALL
As Is Where Is / FOB: Waco, TX
# 5038 B
HRB-8 -2-LH
Two Ram Baler / HRB-8-2-LH 2 Ram Baler
s/n 1949
Recently Rebuilt, Newly Painted / $145,000.00
As Is Where Is
Customer to Uninstall & Load / FOB: GA
# 5066 B
Harris GS 1100 Guillotine Shear/Baler/Logger with 3 Conveyors / Currently Operating
Customer to remove and load
Installed new in 2005. Hours as of 9/23/13: 13,872 Hours
Throat: 34” wide; Box: 25’; Shear force: 1,108 NT
Five 100 HP Motors (special wound to run up 150 HP)
Production: 17-27 tons per hour from customer’s experience.
Three separate conveyers manufactured by Karl Schmidt, all installed new in 2005.
First conveyer is a shaker. 4’ wide x 25’ long. Second Conveyor is a belt conveyer that we use as a picking line. 4’ wide x 26’ long
Third conveyor is a fiber belt radial stacker. 4’ wide x 60’ long. Height of discharge 22’ 10” / $695,000.00
As Is Where Is / Ex Works: CO
Vertical Balers
#3581
General Hydraulics / Model #314-60L-14
S/N 4862 Vertical Baler / $4,500.00
Pending - Find / FOB: Waco, TX
#4823
PTR Vertical Baler / 60” Vertical Baler S/N 98P348 / $4,500.00
As is Where Is / FOB: Waco, TX
#4824
Load King Baler / 60” Vertical Baler
Mod 1003910-HD-6030
S/N 10110 / $5,200.00 / FOB: Waco, TX
#4826
Load King Baler / 60” Vertical Baler
Mod 1003910-HD-630-B
S/M 10131 / $3,000.00
As is where is / FOB: Waco, TX
#4499
Cleveland Hydraulic Vertical Baler / 60” Rear Feed Vertical Baler- Remanufactured in 1998 Rear Feed- Bale Dogs 6” Cylinder 10 HP Motor / $3,500.00
As Is Where Is / FOB: Waco, TX
#4498
Dual Feed – Rear and front feed / 60” Rear Feed Vertical Baler
Labeled Sierra – Is Enterprise VB / $4,500.00
As is where is / FOB: Waco, TX
#4825
Load King Baler / 60” Vertical Baler
Mod HD6030 S/N 13811
480 3ph 10HP / $5,200.00 / FOB: Waco, TX
#4821
PTR Vertical Baler / 60” Vertical Baler S/N
Sold 1-14 / Sold
#4921
Selco Vertical Baler / 60” Vertical Baler s/n 089360512
Sold 1-14 / Sold
#5083
Rubber Roller Chain Conveyor / 11’ Upper, 16’ 8” incline, 11’ Lower Horizontal, 60” Belt / $8,000.00
As is where is / FOB: Waco, TX
#5044
Bunker Walls / 4 pcs
20’ x 11’ x 6” thick / $4,000.00
As is where is / FOB: Waco, TX
# 5004
Document / Trash Recycle Cans / Small and Large Containers
Over 500 Available
Big Grey Cans – 44 h x 27 w x 27 l (weight abilities 200 or 332.5 lbs) / $25.00
Each / FOB: Waco, TX
#5076
Rubber Chain Belt Conveyor Section / Conveyor section only
10’ L x 60” W / $500.00
As is where is / FOB: Waco, TX
#5069
Dens-a-can DAC500B w/ conveyor / 220v
Single Phase / $4,500.00
As Is Where Is / FOB: Waco, TX
#5071
Can Blower / With Control Panel / $300.00
As Is Where Is / FOB: Waco, TX
#5024
Cram-a-lot Baler / Closed End Manual Tie Baler
60XHD Horizontal
was at WM Houston – ours to sell ?? / $3,000.00
As Is Where Is / FOB: Waco, TX
#5089
Slider Belt Section / 20’ x 36” belt width
Section only – no motor / $200.00
As Is Where Is / FOB: Waco, TX
#5090
Chain Slider Belt Section Frame / 20’ L x 6 ‘½ ” W
60” belt width
Section only – no motor / $200.00
As Is Where Is / FOB: Waco, TX
#5091
Chain Slider Belt Section Frame / 20’ L x 6 ‘½ ” W
60” belt width
Section only – no motor / $200.00
As Is Where Is / FOB: Waco, TX
#3585
Dens-A-Can
Densifier / CD2000 s/n 124
Handyman Special. Needs work / $600.00
As Is Where Is / FOB: Waco, TX
#4501
Maren Baler / Auto Tie Baler
Model: 203-338R / $8,000.00
As Is Where Is / FOB: Waco, TX
#4677
MacPresse Baler / Model: MAC 110
Production Rates:
OCC: 24 - 28 tons per hour
ONP: 45 - 50 tons per hour
High Grades: 45 – 50 tons per hour / $62,000.00
As Is Where Is / ExWorks: GA
Buyer to load & freight
#5075
Small Logemann Baler / Press #3 / $5,000.00
As Is Where Is / FOB: Waco, TX
#5070
Extension Hopper / Extension hopper
for IBC baler / $100.00
As Is Where Is / FOB: Waco, TX
#5077
Mayfran Conveyor / Rubber Roller Chain Conveyor
1 of 4 pcs - 20’ incline, 5’ nose over
2 of 4 – Tail section 28.5 lower horizontal
3 of 4 – 20’ lower horizontal – addl section x 77” w belt
4 of 4 15HP 3 phase motor & gear box / $15,000.00
As Is Where Is / FOB: Waco, TX
#5081
Quality Sort
Conveyor / Rubber Chain Sort Belt
18’ 6” L x 58” belt / $2,500.00
As Is Where Is / FOB: Waco, TX
#5082
Slider Belt
Conveyor / Horizontal 39’ 8” L x 51 “ belt / $
As Is Where Is / FOB: Waco, TX

NEED PICTURE

#5092 B
Mosley Can Densifier / RS 2500 15HP
s/n 80095 DOM 10/88 / $5,000.00
As Is Where Is
Rebuilt: $21,000.00 / FOB: Waco, TX
#5109
Can Pak Densifier / CD500 S/N 0011 / $5,000.00
As Is Where Is
Rebuilt $21,000.00 / FOB: Waco, TX
#5110
Mosley
Can Densifier / $5,000.00
As Is Where Is
Rebuilt $21,000.00 / FOB: Waco, TX
#5111
Can Pak
Can Densifier / CD1000 / $5,000.00
As Is Where Is
Rebuilt $21,000.00 / FOB: Waco, TX
#5121 B
Harris HRB 8 Baler / 2 Ram Baler / $120,000.00
As Is Where Is / ExWorks: Austin, TX
Buyer to uninstall, load and transport
#5122 B
Logemann Baler / 2 Ram Baler
s/n 15221 / $120,000.00
As Is Where Is / ExWorks: Austin, TX
Buyer to uninstall, load and transport

*OLD EQUIPMENT*

LEASED to Gachman
#5046
Logemann 2 Ram With
# 5068 Infeed Conveyor / 345AT 2 Ram Baler SN 14670
w/ Infeed Conveyor
16" Main Cylinder, 200 HP
12" Ejector Bales: 36" x 36”
Bale Weight: 1400 lbs of OCC
Wire Tier: L&P 330 / $75,000.00
As Is Where Is / FOB: Waco, TX
SOLD #5065 B
Mosley Bulldog Baler / Bulldog BD75S2 - S/N 30027
DOM 1992 / $69,000.00
As is where is / Ex Works:
El Paso, TX
Still Installed
SOLD #4956
Hustler Steel Belt
Infeed Conveyor / Infeed Conveyer 27’ L x 6’ W
10HP / $30,000.00
As Is Where Is / FOB: Waco, TX
SOLD #3582
Galbreath 4 Yard Compactor / GB GP550 SC3343
Used Compactor / $4,500.00 / FOB: Waco, TX
SOLD #5061 B
BHS Single Stream and Commercial Line Sort System / Two line sort system
Currently Installed / $150,000.00
As Is Where Is
Customer to uninstall / Ex Works: TX