Miniature Valves

Kuhnke Miniature Valves Series 79, 81, 84 Spool Valves

79024
Amplifier
3/2


81024
84215 (Manifold Mtd.)
Amplifier
5/2

Amplifiers can be used to switch line pressure valves from a low pilot pressure signal. A pressure signal applied to the control port operates valve. Pilot signal range 5 – 100 mbar. Valve operating pressure - 2 to 8 bar. Weight 89g.
/ 79026
Air Jet Detector
Fixed Nozzle
3/2

81026
Air Jet Detector
Fixed Nozzle
5/2

Air jet detectors are used for contact sensing of parts and tools. Can be used with delicate components. A stream of air is sent from a nozzle. As an object touches off the nozzle, the stream is blocked causing back pressure and operating the valve. Air consumption – 2 l/m @ 6 bar. Switching time @ 6 bar 65 ms. Weight 60g.
79036
Pulse Shaper
3/2

84236 (Manifold Mtd.)
Pulse Shaper
5/2

The pulse shaper converts a continuous signal into a pulse signal. Ideal for providing count pulses to pneumatic counters or electronic pressure transducers. Can be applied in parallel with working device circuits that have a long on cycle. Operating pressure range is 3 to 10 bar. Duration of pulse 80140 Ms @ 8 bar. / 79025
Air Jet Detector
Flexible Nozzle
3/2

81025
Air Jet Detector
Flexible Nozzle
5/2

Same as air jet detector above, except used with flexible hose and nozzle. Any length of hose can be used, however, length of tube (volume) determines valve switch over time. Can be used for detecting objects in tight areas. See accessories for hose kit cat. no. 43138. Weight 56g.

For manifolds and sub bases used with valves 84215 or 84236 see accessories for miniature solenoid valves.

Approximate valve body dimensions are 38.5mm L (3 way), 55mm L (5 way) x 25mm H x 15mm W. Through body mounting holes (3) – 3mm dia.

See accessories for brackets and renewal parts. For detail dimensions contact us.

49