NF-588/1.5”Digital Photo Frame Keychain

Instruction Manual

SAFETY PRECAUTION AND MAINTENANCE

  • Theapparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed over the product. Dry location use only.
  • No naked flame sources, such as candles, should be placed over or near the product.
  • Keep the digital photo viewer clean and never store it next to a heat source or in dirty, humid or wet places. Keep it out of direct sunlight.
  • Press the digital photo viewer buttons gently. Pressing them or the screen too hard can damage the digital photo frame.
  • Do not use the player in an extremely dry environment, as this can lead to static discharge which can damage the digital photo frame.
  • Never abruptly disconnect the digital photo viewer from a PC while it is uploading,downloading or formatting as this can cause program failure.
  • Care is required with the use of this apparatus in tropical and/or moderate climates.
  • Do not subject the product to harsh impacts. Do not drop the appliance. This may result in damage to the product and loss of data.
  • Do not attempt to dismantle or repair this unit yourself. Repairs should be performed by qualified personnel only.
  • Use a slightly dampened and lint-free cloth to clean this appliance. Do not use alcohol,thinner or benzene to clean the surface of the player.

Product Features

-Supports Auto slide show

-Supportsclock

- LCD contrast adjustment

-Built-in rechargeable Li-battery

- Auto off setting

-Store up to 143photos

-Built-in downloading program software, no need to install any software from a CD disc additionally.

-Supports the picture in JPG, GIF and BMP format.

The controls and function definition

1."[M]" power/ menu button: A. Short press it to display the main menu. (The following is instituted menu key). B.Press it to confirm when an item is selected.C. Press and hold it for about 3 seconds to power on or off the player.

2.[] Select: Move up browse or upward choice (The following is instituted UP key).

3. []Select: Move down browse or downward choice (The following is instituted DOWN key).

4.Reset hole: Re-initialize the system of the unit.

Charging the battery

When you use the device for the first time, connect it with the computer via a USB cable for charging. The first time for charging should be up to five hours. The standard charging time is three hours.

When you connect it with the computer via a supplied USB cable, the player will charge automatically and you can see the charging progress via battery icon at the top left corner of the window screen.

Please note:

-Make sure that the battery is fully charged before the first use.

-Please fully charge the battery every two or three months if the player is not being used for a long time. Otherwise, the saving time set will be lost.

-Please recharge the battery when the battery icon shows the power is empty.

OPERATION INSTRUCTION

Power on
In the power off mode, press and hold the[M] key to power on the player. The screen will be turned on.
Power off
Press the [M] button. Then you will find the main menu. Press the [] or [] button to select “Power Off”.Press the [M] button to enter submenu and press [] or [] to choose “YES”; press [M] to confirm. The unit will be turned off. Or you can press and hold [M] to power off the player directly.

Picture Browsing

  • When the photo frame is powered on, it will start to play the pictures directly, the picture-browsing mode is default.
  • If no picture is downloaded in the photo frame, the screen will display”No Photo”.
  • Press the [] or [] button to browse the previous or next picture.
  • During browsing the picture, press the [M] button to enter the main menu. Press the [] or [] button to select “Slide Show”.And then press the [M] button to enter the next menu. Press the [] or [] button to set the interval time of each picture in a slide show(0-15 seconds).

Main Menu Specification
During browsing the picture, press the [M] button to enter the main menu, the menu will display as below:

  • USB Connect: Select to connect the photo frame with the computer.
  • Slide Show: To select the display mode.
  • Auto Off: To set the auto power off time.
  • Power Off: To select turn off the player.
  • LCD Contrast: To adjust the contrast of the screen.
  • Backlight: To adjust backlight of the photo frame
  • Clock: to set the clock display mode.

USB Connect
Connect the photo frame to the computer with the provided USB cable, and then press [M] to enter the main menu. Press [] or [] button to select the "USB Connect" option. Press the [M] button to enter. Select “Yes” and press [M] to confirm, the screen will display “USB CONNECTED”.

Slide Show

Press the [] or [] button to select "Slide Show" option from the main menu and press the[M] button to enter the submenu. Press the [] or [] button toadjust interval time of each picture. There are 0-15 seconds different interval times for selection. Press the [M] key to confirm; photos will be played automatically.

If the interval time is set as “0”, you can browse the picture manually by pressing [] or [] button.

Auto OFF setting

Select "Auto OFF" from the main menu and press the[M] button to enter the auto off time setting. There are 0-20 minutesdifferent options for users to choose. Adjust “00” to disable this function.

Power off

Select "Power Off" menu from the main menu, and then press the[M] button to enter submenu; press [] or [] button to select “Yes”.Then the unit will be turned off.

LCD Contrast

Select the "LCD Contrast" option and press the [M] button to enter the setting menu. Press the [] or [] button to change the contrast of the screen. There are 00-15levels for users to adjust the LCD Contrast.

Backlight

Select the "Backlight" option and press the [M] button to enter the setting menu. Press the [] or [] button to change the backlight of the screen. There are 01-21 levels for users to adjust the Backlight.

Display Clock

Select the " Clock" from the main menu and press the [M] button to enter the submenu. There are three options: Digital Clock, Analog Clock, Alarm Clock.

1). Digital Clock

Select the “Digital Clock” option and press the [M] button to display the clock. Press the [M] button to return to the picture browsing mode.

2). Analog Clock

Select “Analog Clock” option from the Clock submenu and press the [M] button to confirm.It enters analog Clock display. Press [M] button to return to picture browsing mode.

3). Alarm Clock

Select “Alarm Clock” option from the Clock submenu and press the [M] button to enter the next menu. Press [] or [] to selectOn/Off/Cancel from the submenu.

Set Clock

Select the “Set clock” option from main menu and press the [M] button to display the clock. Press the [M] button repeatedly to select the year, month, date,hour, minute, second, and weekday; press the [] or [] button to change the value under each item and press the[M] button to confirm.

Delete picture

Select “Delete One” and press [M] button to enter the next menu. Select “Yes” to delete the current browsing picture or “No” to cancel the deletion and return to the picture browse mode.

Select “Delete All” and press [M] button to enter the next menu. Select “Yes” to delete all the pictures in the photo frame or “No” to cancel the deletion and return to picture browse mode.

Stopwatch

Select “Stopwatch” and press [M] button to enter submenu; Press [M] to start the stopwatch and press [M] again to pause. Press []it return to picture browse and press [] to reset the stopwatch time.

Exit
Select "Exit" menu from the main menu. Press the [M] button to exit and return to the picture browsing mode.

CONNECTION AND DOWNLOADING

Make sure the viewer is connected properly to the PC during uploading or downloading to avoid program errors.

Connecting to the PC

Connect the photo frame to the PC with the USB cable(included). Note that a USB hub or USB extension cable must not be used.

Press the [M] button to display the main menu; Press [] [] button to select “USB Connect” option from the main menu; press [M] button and select “Yes”to confirm the connection.

PC system detects”New hardware” and will begin to install the driver automatically. If necessary, wait until system installation has been completed before use.Then the DPFMate tool will pop out on computer screen. If the tool doesn’t pop out automatically, pls double click “My Computer” and local disk with built in software will be found.

Please double click “DPFMate tools” icon in local disk to open it manually.

(Note: The default language is English.).

Button definition:

Select files: Select the image you want to put into the unit.

Delete: Delete the image you have chosen.

Add: Add the selected picture to the Device on the right of windows.

Rotate Left:Rotate the picture anti-clockwise.

Rotate Right: Rotate the picture clockwise.

+/-: Zoom in/out the picture you selected

Save:Click the desired picture in the device, and then click the Save bar to save the selected pictures to computer.

SaveAll:Click SaveAll bar to save all the pictures in the device to computer.

All: Click All bar to select all the pictures in the device.

Download:Download the selected pictures in the Device to the unit.

Exit: Exit the picture download dialog.

Editing and downloading Pictures

  • Choose picture source from the top left box of the window, and then select the desired pictures in it. The selected picture will be displayed at “file list” area.Click your desired picture.Then you will find the picture at “Preview”area.
  • Select“Clear”means to crop the picture to become in rectangular dimension rations to fit the dimension rations the screen. Click and hold the rectangular box to move rectangular box to the desired position.Click the Add bar to add it to the preview album, the part out of the rectangular selection will be deleted.
  • Click the “RotateL “or” RotateR” bar to rotate the picture anti-clockwise or clockwise.
  • Click“Add”bar to add the selected picture to “Device” on the right hand side of the window. At the same time, other pictures in the GIF/JPEG/BMP will be converted to BMP format pictures supported by the unit. You can add up to 143 pictures to the preview album.
  • You can click and select one desired picture or press and hold the Ctrl button on the keyboard to select multiple pictures.
  • After adding the desired pictures to the device, click the “Download” bar to download these pictures to the unit.
  • Click the “Delete” to delete the selected pictures.
  • Click the “Save” bar to save the selected pictures to the computer.
  • After finished all, click the Exit bar to exit the built-in program.

Disconnecting from the PC

After transferring is completed, click the “Exit” button to quit the program, and then disconnect the photo frame from the PC safely; click the icon in the box at the bottom right corner of the Windows screen, and a box will appear. Click the box, it will display “Safe to remove hardware”; confirm stop the device and then unplug the USB cable.

SPECIAL REMINDER:

Do not disconnect the USB cable when the data is being transferred between PC and your photo frame, which may damage and lose the data in the product.

Disconnection should be conducted only when “device can now be safely removed from the system” is displayed.

NF-588/ Marco Digital para Fotos Portátil

Manual de Operación

FAVOR DE LEER COMPLETAMENTE EL MANUAL ANTES DE OPERAR ESTE PRODUCTO.

CONSERVAR EL MANUAL PARA FUTURAS REFERENCIAS

PRECAUCIONES DE SEGURIDAD Y MANTENIMIENTO

  • Este producto no debe ser expuesto al goteo o salpicadura de agua, a la lluvia o humedad. No colocar objetos llenos con líquidos, como son vasos encima de este producto. Usar solo en lugares secos.
  • No colocar cerca o sobre el producto fuentes generadoras de flamas como son velas, veladoras.
  • Mantener el marco digital limpio y nunca almacenarlo cerca de fuentes radiadoras de calor o en lugares húmedos y sucios. Mantener el marco digital fuera de los rayos directos del sol.
  • Presionar los botones del marco digital suavemente, El presionar los botones o la pantalla fuertemente puede causar daños al marco digital.
  • No usar el marco digital en ambientes extremadamente secos, esto puede causar descargas estáticas las cuales pueden dañar al marco digital.
  • No desconectar repentinamente el marco digital de la computadora cuando esta cargando, descargando archivos o al estar formateándolo esto puede causar fallas en el programa.
  • Cuidados son requeridos cuando el marco digital es usado en climas tropicales y/o moderados.
  • No someter el marco digital a altos impacto. No tirar el marco digital. Esto puede resultar en daños al marco y pérdida de datos.
  • No intentar desarmar o reparar el marco digital usted mismo. Todo servicio de reparación debe ser realizado por el centro de servicio autorizado o por personal calificado.
  • Para limpiar el marco digital usar una tela suave, limpia, libre de pelusa y humedecida suavemente. No usar alcohol, thiner, benceno u otros productos químicos para la limpieza ya que estos pueden dañar el acabado del gabinete.

CARACTERISTICAS

  • Función de deslizamiento automático de las imágenes.
  • Función de reloj.
  • Ajuste del contraste de la pantalla de cristal liquido.
  • Batería recargable interna de litio.
  • Función de apagado automático.
  • Almacena hasta 143 archivos de imágenes.
  • Programa de descarga interno, no se requiere instalar ningún programa de un disco compacto adicional. (Función de conectar y operar automáticamente).
  • Soporta archivos de imágenes en formato jpg, gif y bmp.

DESCRIPCION DE PARTES Y FUNCIONES

Nota: Las especificaciones y el diseño de este producto están sujetos a cambios sin previo aviso para mejoras de los mismos.

  1. Botón de “MENU” / Poder: A.Estando el marco digital encendido, presionarlo para desplegar el menú principal. B. Presionar nuevamente para confirmar la selección. C. Presionar y sostener aproximadamente tres minutos para encender o apagar el marco digital.
  2. “”: Mover hacia arriba o seleccionar la opción siguiente.
  3. “”: Mover hacia abajo o seleccionar la opción anterior.
  4. “RESET”: Presionar para restablecer los ajustes predeterminados de fabrica.

CARGA DE LA BATERIA

Antes deusar el marco digital por primera vez, conectarlo a la computadora a través del cable USB para cargar la batería. LA primera vez que carga la batería debe ser mínimo 5 horas. El tiempo normal de carga de la batería es de tres horas.

Cuando usted conecta el reproductor a la computadora a través del cable USB, el reproductor entra automáticamente al modo de carga y puede observar el progreso de carga de la batería en el indicador localizado en la esquina superior izquierda de la ventana de la pantalla.

Notas:

  • Asegurarse que la batería esta cargada completamente antes de usar el marco digital por primera vez.
  • Favor de cargar la batería completamente cada dos o tres meses si el marco digital no es usado por un periodo largo de tiempo de otra manera el tiempo de vida de la batería disminuye.
  • Favor de recargar la batería cuando el indicador de carga de la batería indica que la batería esta descargada.

OPERACION

Encender

En el modo de apagado, presionar y sostener “MENÚ” para encender el marco digital. La pantalla se encenderá.

Apagar

Presionar el botón [M] para desplegar el menú principal. Presionar el botón [] o [] para seleccionar Apagar “Power Off”. Presionar el botón [M] para desplegar el submenú y presionar el botón [] o [] para seleccionar Si “Yes”, presionar [M] para confirmarlo. El reproductor se apagara. También puede presionar y sostener el botón [M] para apagar el reproductor directamente.

Búsqueda de archivos de imágenes

  • Cuando el marco digital esta encendido, este inicia la reproducción de las imágenes automáticamente, el modo de búsqueda de imágenes esta predeterminado.
  • Si no hay archivos de imágenes en el marco digital, la pantalla despliega “No Photo”.
  • Presionar “” o “” para buscar la imagen siguiente o anterior.
  • Durante la Durante la búsqueda de imágenes, presionar el botón [M] para desplegar el menú principal. Presionar el botón [] o [] para seleccionar mostrar deslizamiento “Slide Show”” y entonces presionar el botón [M] para entrar al siguiente menú. Presionar el botón [] o [] para ajustar el intervalo de tiempo de cada imagen en el deslizamiento (0 – 15 segundos).

Menú Principal

Durante la búsqueda de imágenes, presionar “MENÚ” para entrar al menú principal y se despliega la siguiente pantalla:

  • Conectar USB “USB Connect”: Seleccionar para conectar el marco de fotos a la computadora.
  • Mostrar deslizamiento “Slide show”: Para seleccionar el modo de despliegue.
  • Apagado automático “Auto off”: Para ajustar el tiempo de apagado automático.
  • Power Off: Seleccionar para apagar el marco digital.
  • Contraste “LCD Contrast”: Para ajustar el contraste de la pantalla.
  • Luz de fondo “Backlight”: Para ajustar la luz de fondo del marco de fotos.
  • Reloj “Clock”: Para ajustar el modo de despliegue del reloj.

CONEXIÓN USB

Conectar el marco para fotos a la computadora a través del cable USB incluido, entonces presionar el botón [M] para entrar al menú principal. Presionar el botón [] o [] para seleccionar la opción de “USB Connect”. Presionar el botón [M] para entrar a la opción, presionar el botón [] o [] para seleccionar SI “Yes” y presionar el botón [M] para confirmarlo, la pantalla despliega “USB Connected”.

MOSTRAR DESLIZAMIENTO “SLIDE SHOW”

Presionar el botón [] o [] para seleccionar la opción de “Slide show” en el menú principal y presionar el botón [M] para entrar en el submenú. Presionar el botón [] o [] para ajustar el intervalo de tiempo de cada imagen. Hay diferentes intervalos de tiempo de 0 – 15 segundos para seleccionar. Presionar el botón [M] para confirmar, las imágenes seran desplegadas automáticamente si el intervalo de tiempo es ajustado a “0”, puede observar las imágenes manualmente presionando el botón [] o [].

AJUSTE DEL APAGADO AUTOMATICO

Seleccionar la opción de apagado automático “Auto off” en el menú principal y presionar “MENÚ” para entrar a los ajustes de apagado automático. Hay diferentes opciones a seleccionar de 0 – 20 minutos. Ajustar a “00” para deshabilitar la función de apagado automático.

APAGADO AUTOMATICO “AUTO OFF”

Presionar el botón [] o [] para seleccionar la opción de “Auto off” en el menú principal y presionar el botón [M] para entrar en el submenú, presionar el botón [] o [] para seleccionar SI “Yes”, entonces la unidad se apaga.