TECHNICAL INFORMATION (TDS 53)

CA26 METAL BONDER
Modified Cyanoacrylate. Also Bonds Elastomers & Plastics.
DESCRIPTION
CA26 is a single component Industrial Quality superglue for Metal Parts bonding. CA26 is ideal for applications where a small gap is present and where high strength is required.
APPLICATIONS
Typical applications are on all types of Metals including Brass, Aluminium, Steel etc., where CA26’s shock resistance and overall chemical resistance such as solvents is required.
USEFUL HINTS/NOTES
Degrease with 7A03 Solvent. Functional strength develops fast in Cyanoacrylates, however curing continues for up to 24 hours, at which point the product will have reached its full development of strength and chemical resistance.
PROPERTIES
Tough Metals compatible bonder.
Medium Viscosity: 120cps
Speed of cure allows alignment.
Tensile Strength: Up to 30N.mm(2)
INSTRUCTIONS FOR USE
Ensure parts are clean, dry and free from oil and grease.
PROCEDURE FOR APPLICATION
Apply sparingly to one side and hold parts until handling strength is achieved.
COMPATIBLE ACCELERATORS/PRIMERS
Primers such as 7A02 or Double Strength 7A11 as accelerators for fillet cure for priming absorbent surfaces. / TECHNICAL FEATURES
Resin…………………………………….Mod Cyanoacrylate
Colour…………………………………..Clear
Cure Speed With Activator……….……<10 seconds
Cure Speed Without Activator……… …30-60 seconds
Viscosity….…………………………….120cps
Gap Fill………………………………….0.05mm
Flash Point………………………………>85C
Shelf Life………………………………..12 months @ 20C
Specific Gravity…………………………1.06
Max. Operating Temperature………….. + 85C
CURED PERFORMANCE
Full Cure:………………………………..24 hours
Fixture Time:……………………………<30 seconds
Tensile Strength:…………………………20-30 N/mm(2)
SOLVENTS RESISTANCE
III Trichloroethane:…………………….95% @ 22C
Ethanol:………………………………..100% @ 22C
Petrol:…………………………………..95% @ 22C
Motor Oils:…………………………….100% @ 40C
Tested on Mild Steel >500 hours.
STORAGE
Store in a cool area out of direct sunlight. Refrigeration to 5C gives optimum storage stability.
PRESENTATION
Bottles:…………………………………..20g, 50g, 500g
HEALTH & SAFETY IN USE
DANGER -Superglue bonds skin and eyes in seconds.
If accidental skin bonding happens wash with warm soapy water and prise skin apart using a blunt instrument (such as a teaspoon handle).
In case of eye contact, bathe immediately with water and seek immediate medical attention.
The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. Holdtite and its agents cannot assume liability or responsibility for results obtained in the use of its products by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in out literature and furthermore the users responsibility to observe and adopt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products.