SalientSystemsJuly, 2016

10801N Mopac Expy, Bldg3, Ste700

Austin,Texas 78759

512-617-4800

512-617-4801FAX

Product GuideSpecification

Specifier Notes:Thisproduct guidespecificationiswrittenaccording totheConstruction Specifications Institute (CSI)3-PartFormat, basedonMasterFormat2004andTheProject ResourceManual—CSI Manual ofPractice. The Manufacturerisresponsible for technical

accuracy. Byremovingthe references tospecific SalientSystemsproduct namesorpart numbers, thetext mayalsobeusedalsoinperformance-basedspecifications.

Thesectionmust becarefullyreviewedandeditedbytheArchitectorEngineertomeet the requirementsoftheprojectandlocal buildingcode. ItalicizedWordsandsentenceswithin brackets[ ]arechoices toincludeor excludeaparticularitem or statement. Coordinatethis sectionwithotherspecificationsectionsandtheDrawings.

Section 282323

Video SurveillanceSystemsInfrastructure

PART 1–GENERAL

1.1SUMMARY

A.SectionIncludes

1.Videosurveillanceservers.

B.RelatedSections

1.Section282313– VideoSurveillanceControl andManagement

Systems.

2.Section282316– VideoSurveillanceMonitoringand Supervisory

Interfaces.

3.Section282319–Digital VideoRecorders andAnalogRecording

Devices.

4.Section282329– VideoSurveillanceRemoteDevices and

Sensors

1.2REFERENCES

A.Underwriters Laboratories,Inc. (UL) (

1.UL 50EnclosuresforElectrical Equipment.

2.UL 60950-1InformationTechnologyEquipment- Safety.

1.3SUBMITTALS

A.Submitunderprovisions ofSection[013300]. B. ProductData:

1.Manufacturer’s data, user andinstallation manuals forall equipmentandsoftware programs including computer equipmentandotherequipmentrequired foracomplete VMS.

C. ShopDrawings

1. System devicelocations on architecturalfloor plans.

2. Full Schematicofsystem includingwiringinformationfor all devices. D.CloseoutSubmittals

1.User Manuals

2.Parts list.

3.Systemdevicelocationsonarchitecturalfloor plans.

4.Wiringandconnection diagrams.

5. Maintenancerequirements.

1.4QUALITYASSURANCE

A.Manufacturer shall haveaminimumof 10years experienceinthe manufactureanddesignof VMS products.

B.Installer:

1.Minimum of5years experienceinstallingVMS products.

2.All installation,configuration,setup,program andrelatedwork shall beperformed by techniciansthoroughlytrainedbythe manufacturer intheinstallationandserviceoftheequipment provided.

1.5DELIVERY,STORAGE AND HANDLING

A.Complywithrequirements of Section[0160 00].

B.Deliver materials inmanufacture’s original,unopened,undamaged containers with original identificationlabels.

C. Protectstored materials from environmentalandtemperature conditionsfollowingthemanufacturer’s instructions.

D. Handleandoperateproductsandsystemsaccordingto manufacturer’s instructions.

1.6WARRANTY

A.Providemanufacturer’s warrantycoveringthree(3) yearsfor replacementandrepair ofdefective equipment.

1.7MAINTENANCE

A.Make ordering ofnewequipmentfor expansions,replacements and spareparts available.

B.Providefactorydirecttechnical supporttotheinstallingfirm.

PART 2– PRODUCTS

2.1VIDEOSERVER

A.Manufacturer:

The VideoServer shall bethePowerPro-R as supplied by: SalientSystems Corporation

10801N Mopac Expy, Bldg3, Ste700

Austin,Texas 78759

512-617-4800

512-617-4801FAX

B.Substitutions:

Under the provisions ofDivision 1:

1. All proposedsubstitutionsmustbeapprovedbytheConsultant or

Architect/Engineer professional.

2. Proposedsubstitutionsmustprovidealine-by-linecompliance document.

C.GeneralServer Features:

1. Thevideoserver shallbeintegratedintoaserver-class computingplatform(‘PC’).ThePC shall be availableinarack- mountchassis andshall fitinanEIA-standard19” equipmentrack utilizingnomorethanfour units(2U) ofrack space.

2. Theserver OperatingSystemshall beMicrosoftWindows 7

Professional 64bit.

3. Server shall havefrontaccessible,hot-swap hard-disk trays

5. Server shall havefrontaccessibleUSBports.

D.Server SystemComponents:

1. Theserver shall meetor exceedthefollowingsystemcomponent specifications:

a. Server shall utilizeanIntel C610 chipset based motherboard

b. Server shall utilizeIntel XeonE5-2620 ≥2.4GHz

c. Server shall have atleast 8GBofsystem memory

d. Server StorageController shall bea PERC H730.

e. All harddisk components usedbythesystem shall be designedspecificallyfor either surveillance class orenterpriseclass storage applicationsin disk denseenvironments.

f. Server shall provide between4TBand30TB ofinternal

RAID5storagefor video eventdata.

g. Server shall have as thenetwork controller fourGigabit

(10/100/1000Mbits/sec) LAN subsystem.

h. Server shall haveUSB2.0and High Speed USB 3.0 serialports,for the attachment of externalstorage, digital I/Oandarchive devices.

i. Server shall haveRS-232C serial port,for communications with pan-tilt-zoomcameras andotherauxiliarydevices.

2. Theserver shall providethefollowingoptionalcomponents:

a. Usinganalogframegrabber technology,theDVMSshall be capableofsupportingbetweenzero(0) andthirty two(32) NTSC orPALvideosources,inincrementsoffour (4) video sources.

b. Usingdigitalvideocapturetechnology,theDVMSshall be capableofsupportingIP-basedvideosources,inincrements ofone(1) videosource.

c. TheDVMSserver shall supportthefollowing “Compression

Formats”foranalogvideosources (NTSC orPAL):

1. MJPEG

2. MPEG4

3. H.264

d. Thevideoframe grabber expansionboardshall utilizea separatevideodecoder for eachvideosource, allowingfor fullyindependentcontrol ofthefollowingfor eachsource:

1. Brightness;

2. Contrast;

3. Hue;

4. Saturation;

5. Chroma.

e. Theserver shall optionallyprovidesupportfor between sixteen(16) andsixty-four (64)digital inputandoutput pointsfor wiredintegrationwith access control, building automationequipment,sensors, monitors,orother applicationrequirements thatmaybedeterminedatalater time.Theserver shall support anycombinationofthe followingdigital input andoutputdevices thatare physically connectedtotheserver viathe PC’s USBbus:

1. 16in+ 16out–16opticallyisolated digital inputsand16reed-relayoutputs.

3. Theserver shall supportcaptureofvideofromcameras:

a. Server shall supportIPcamerasfromleadingcamera manufacturers,withthesevideofeedsconnectedthrough theserver network controller withouttheneedfor encoders or other devices:

  1. ACTi
  2. AMAG
  3. AmericanDynamics
  4. Appro
  5. ArecontVision
  6. Advanced Technology Video
  7. Aver
  8. Aviglion
  9. AVTech
  10. Axis
  11. Aventura
  12. Basler
  13. Bosch
  14. Brickcom
  15. Canon
  16. Cisco
  17. Digital WatchDog
  18. D-Link
  19. DRS
  20. Fine CCTV
  21. Ganz
  22. Genesis CCTV
  23. Geovision
  24. Global
  25. Hikvision
  26. Honeywell
  27. IDView
  28. Interlogix TruVision
  29. Iteris
  30. Immervision
  31. IQinVision
  32. JVC
  33. Lilin
  34. Lumenera
  35. March
  36. Mango
  37. Mobotix
  38. OpenEye
  39. Optiview
  40. Panasonic
  41. Pelco
  42. Probe
  43. Q-See
  44. Samsung
  45. Scallop
  46. Sentry 360
  47. SightLogix
  48. SmarterCam
  49. Sony
  50. Speco
  51. Stardot
  52. Stentofon
  53. Toshiba
  54. Verint
  55. Video IQ
  56. Vitek
  57. VivoTek
  58. Weldex

b. Server shall supportcontrol ofPTZ camerafromleading cameramanufacturers:

  1. American Dynamics ASCII Continuous
  2. American Dynamics ASCII Make-Break
  3. ACTi
  4. Axis
  5. Bosch
  6. CanonVCC-4
  7. Kalatel
  8. Panasonic IP
  9. Panasonic WV-CS850 Conventional
  10. Panasonic WV-CS850 New
  11. PelcoIP
  12. Pelco ASCII
  13. Pelco D
  14. Pelco P
  15. Philips Biphase
  16. RVision
  17. SAE
  18. Samsung
  19. Sensormatic
  20. SonyEVI–D30/D31
  21. SonyP5IP
  22. SonyViscaIP
  23. Sony Visca EVI D30-D31
  24. ToshibaIK-WBIP
  25. ToshibaIK-WB21AIP
  26. Ultrak KD6 (Diamond)
  27. VCL
  28. Vicon

Chassis Features:
  1. TheFromFactor shallbe 2U.

  1. The dimensions shall be 18.99” x3.41” x23.43”

  1. Rear ports shallbe1xUSB 3.0 and 1x USB 2.0 and 1x VGA

  1. Frontports shallbe2xUSB 2.0., and 1x VGA

  1. Drive Bays shall be8 x3.5” SATAhot-swap

F. Electrical:

1. Input Voltage:AC 100-240V50-60Hz.

2. Power Supply:750WAC-DC,redundant(1+1),hot-swap

G.Environmental:

1. TemperatureRange:

a. Operating:50to95degrees F (10to35degrees C)

b. Non-Operating: -40to149degrees F (-40to65C)

2. RelativeHumidityRange:

a. Operating 10–80%(noncondensingat ambient)

b. Non-operating5-95%(non-condensingatambient)

PART 3– EXECUTION

3.1EXAMINATION

A. Examine areatoreceive devices andnotifyanyadverseconditions affectinginstallation orsubsequentoperation.

B.Do notbegininstallation until unacceptableconditionsarecorrected.

3.2PREPARATION

A. Protectdevices fromdamage duringconstruction.

3.3INSTALLATION

A.Install devices inaccordancewithmanufacturer’s instruction atlocations indicatedonthefloordrawingplans.

B.Perform installationwithqualifiedservice personnel.

C. Install devices in accordancewiththeNational Electrical Code or applicablelocal codes.

C.Ensureselectedlocationis secureand offers protectionfrom accidental damage.

3.4FIELD QUALITYCONTROL

A.Testsnugnessofmountingscrews ofall installedequipment. B.Test proper operation ofall VMSdevices.

C. Determineandreportall problemstothemanufacturer’s customer service department.

3.5ADJUSTING

A. Makeproper adjustmenttovideosystem devices for correctoperationin accordancewithmanufacturer’s instructions.

3.6DEMONSTRATION

A. Demonstrateatfinal inspectionthattheVMSis functioningproperly.

END OF SECTION