ACP WGC6/WP18

DRAFT
Validation Cross Reference Index

for the

UAT SARPS and Technical Manual
V0.5

Change Record

Date/Version / Change
31 March 2003, V0.1 / Original draft presented at UAT Subgroup
meeting in Montreal 31 March – 4 April 2003
27 May 2003, V0.2 / Updated for review at UAT Subgroup meeting in Brussels 10-13 June 2003
15 June 2003, V0.3 / Updated after the review at UAT Subgroup meeting in Brussels 10-13 June 2003
29 Aug 2003, V0.4 / Updated for review during UAT Subgroup teleconference on 12 Sept 2003
12 Sept 2003, V0.5 / Updated with input from UAT Subgroup teleconference for review at ACP WG-C meeting in Toulouse 20-24 October 2003

ICAO

Address

City, Country, Code

Telephone

Facsimile

Internet

Please call ICAO for pricing and ordering information

Validation Cross Reference Index

for the

UAT SARPS

And the

UAT Technical Manual

Validation Acronyms:

IA / Inspection using common knowledge / IT / Integration Test / NVR / No Validation Required (may include editorial inspection)
IB / Inspection through use of prior analysis/documents
A / Analysis / FT / Flight Test / WP / Working Paper
S / Simulation / MN / Monitoring
UT / Unit Test / MD / Manufacturer’s Data

Validation Cross Reference Index for the UAT SARPS

SARPS Paragraph /

Title

/ Validation Method / Validation Sources /

Status

12.1 / Definitions and Overall System Characteristics / NVR
12.1.1 / Definitions / NVR / Note: the UAT system will be renamed to more accurately reflect the function of the system.
12.1.2 / UAT Overall System Characteristics / NVR
12.1.2.1 / Transmission Frequency / IB, UT / RTCA: UAT-WP-2-05, Page 3 Section 3,
RTCA: UAT-WP-2-14, RTCA: UAT-WP-5-15, Regression Test of Production CAPSTONE avionics unit
12.1.2.2 / Frequency Stability / IA, IB / RTCA: UAT-WP 4-11 Check for additional WJW or TLM paper.
12.1.2.3 / Spurious Emissions / IB / RTCA: UAT-WP-5-14, Page 3, Sections 3 & 4
Diplexer presentation paper at meeting 4 of UAT subgroup
12.1.2.4 / Transmit Mask / IB, UT, A / DFS testing shows that mask is sufficient to protect adj DME for enroute
RTCA paper with rationale for transmit mask
RTCA: UAT-WP-8-04A
Regression Test of Production CAPSTONE avionics unit
Rockwell Collins analysis and, if possible, prototype of A3 transmitter
ICAO ACP WG-F Meeting 10 Summary
12.1.2.5 / Polarization / IA
12.1.2.6 / Transmitter Power Output Requirements / IB, A, MD, UT / RTCA: UAT-WP-6-08, RTCA: UAT-WP-8-08,
Rockwell Collins analysis and, if possible, prototype of A3 transmitter.
Appendix K of RTCA DO-282 (shows requirement is adequate)
If possible, test results from first article testing of new Capstone ground stations (FAATC and or vendor).
12.2 / System Characteristics of the Ground Installation / NVR
12.2.1 / Ground Station Transmitting Function / NVR
12.2.1.1 / Power / I / RTCA: UAT-WP-6-08
12.2.1.1.1 / Maximum Power / A / APL study in progress
12.2.1.1.2 / Minimum Power / IB / Check for WP or other test results on -91 dB sensitivity for Ground Uplink messages
12.3 / System Characteristics of the Aircraft Installation / NVR
12.3.1 / Transmitting Function / NVR
12.3.1.1 / Power / IB / Check for WP or other test results on -93 dB sensitivity for ADS-B messages
Appendix K of RTCA DO-282
12.3.2 / Receiving Function / NVR
12.3.2.1 / Receiver Sensitivity / NVR
12.3.2.1.1 / Long UAT ADS-B Message as Desired Signal / IB, UT / Appendix K of RTCA DO-282
Regression testing of certified UAT Capstone avionics
12.3.2.1.2 / Basic UAT ADS-B Message as Desired Signal / IB, UT / Appendix K of RTCA DO-282
Regression testing of certified UAT Capstone avionics
12.3.2.1.3 / UAT Ground Uplink Message as Desired Signal / IB, UT / Appendix K of RTCA DO-282
Regression testing of certified UAT Capstone avionics
12.3.2.2 / Receiver Selectivity / IB / RTCA: UAT-WP-4-13, UAT-WP-5-08
12.3.2.3 / Receiver Tolerance to Pulsed Interference / IB, UT / RTCA: UAT-WP-11-19, Add reference for cosite requirement wrt 1090 MHz
Two separate unit tests: 1) in full up self interference, 2) DME cochannel to compare with JSC results on premops unit
12.3.2.4 / Receiver Desired Signal Dynamic Range / IA
12.4 / Physical Layer Characteristics / NVR
12.4.1 / Modulation Rate / IB / RTCA: UAT-WP-9-02, Page 2, UAT-WP 4-11A
12.4.2 / Modulation Type / IB / Mitre: MTR96W28R1, section 2.1.4 (put on FAA web site)
12.4.3 / Modulation Distortion / IB, A / RTCA: UAT-WP-9-02, Page 3
UAT –WP-15-01
Results on measurement methods for eye diagram to be provided by WG-5
12.4.4 / Broadcast Message Characteristics / IA
12.4.4.1 / UAT ADS-B Message / IB / RTCA DO-282 pages 18-21
12.4.4.1.1 / Bit Synchronization / IB / RTCA: App H of RTCA DO-282
12.4.4.1.2 / Payload / NVR / Payload requirements will be validated in the validation of the Manual on UAT
12.4.4.1.3 / FEC Parity / NVR
12.4.4.1.3.1 / Code Type / IB / RTCA DO-282, Appendix C, M
12.4.4.1.3.2 / Transmission Order of FEC parity / IA / RTCA DO-282 Appendix C
12.4.4.2 / UAT Ground Uplink Message / IB / RTCA DO-282, page 22
12.4.4.2.1 / Bit Synchronization / I / RTCA: App H of RTCA DO-282
12.4.4.2.2 / Interleaved Payload and FEC Parity / NVR
12.4.4.2.2.1 / Payload (before interleaving and after de-interleaving) / NVR / Payload requirements will be validated in the validation of the Manual on UAT
12.4.4.2.2.2 / FEC Parity (before interleaving and after de-interleaving) / NVR
12.4.4.2.2.2.1 / Code Type / IB / RTCA DO-282, Appendix M
12.4.4.2.2.2.2 / Transmission Order of FEC Parity / IA
12.4.4.2.2.3 / Interleaving Procedure / IB / UAT WP 5-06,
If possible, test results from first article testing of new Capstone ground stations (FAATC and or vendor)

Validation Cross Reference Index for the UAT Technical Manual

UAT Technical Manual Paragraph /

Title

/ Validation Method / Validation Sources /

Status

1 / Introduction / NVR
1.1 / Outline of The Manual / NVR
1.2 / Objective and Scope / NVR
1.3 / Definitions / NVR / Note: the UAT system will be renamed to more accurately reflect the function of the system.
2 / UAT Message Payload / NVR
2.1 / UAT ADS-B Message Payload / NVR
2.1.1 / Payload Type / IB, IT / RTCA 282 compliance matrix (Appendix B).
Consistent with Capstone program schedule, test Capstone II avionics against new Capstone ground station to verify all message fields supported by those equipments.
2.1.2 / Payload Elements / IB, IT / See 2.1.1
2.1.3 / ADS-B Payload Composition by Payload Type Code / IB, IT / See 2.1.1
2.1.4 / General Payload Encoding Rules / NVR
2.1.4.1 / Payload Transmission Order / IB, IT / See 2.1.1
2.1.4.2 / Truncation of Data Into Payload Fields
2.1.5 / Payload Contents / NVR
2.1.5.1 / HEADER Element / IB, IT / See 2.1.1
2.1.5.1.1 / PAYLOAD TYPE CODE / IB, IT / See 2.1.1
2.1.5.1.2 / ADDRESS QUALIFIER / IB, IT / See 2.1.1
2.1.5.1.3 / ADDRESS Field Encoding / IB, IT / See 2.1.1
2.1.5.1.3.1 / ICAO 24-Bit Aircraft Address of Transmitting Aircraft / IB, IT / See 2.1.1
2.1.5.1.3.2 / Reserved for National Use / IB, IT / See 2.1.1
2.1.5.1.3.3 / ICAO 24-Bit Aircraft Address of TIS-B Target Aircraft
2.1.5.1.3.4 / TIS-B Track File Identifier
2.1.5.1.3.5 / Surface Vehicle Address
2.1.5.1.3.6 / Fixed Beacon ADS-B Beacon Address
2.1.5.2 / STATE VECTOR Element / IB, IT / See 2.1.1
2.1.5.2.1 / LATITUDE and LONGITUDE / IB, IT / See 2.1.1
2.1.5.2.2 / ALTITUDE TYPE Field Encoding / IB, IT / See 2.1.1
2.1.5.2.3 / ALTITUDE Field Encoding / IB, IT / See 2.1.1
2.1.5.2.4 / NIC Field Encoding / IB, IT / See 2.1.1
2.1.5.2.5 / A/G STATE Field Encoding / IB, IT / See 2.1.1
2.1.5.2.5.1 / Determination of Vertical Status / IB, IT / See 2.1.1
2.1.5.2.5.2 / Validation of Vertical Status / IB, IT / See 2.1.1
2.1.5.2.6 / Horizontal Velocity Subfields / IB, IT / See 2.1.1
2.1.5.2.6.1 / Encoding as “North Velocity” Form / IB, IT / See 2.1.1
2.1.5.2.6.2 / Encoding as “Ground Speed” Form / IB, IT / See 2.1.1
2.1.5.2.6.3 / Encoding as “East Velocity” Form / IB, IT / See 2.1.1
2.1.5.2.6.4 / Encoding as “Track/Angle Heading” Form / IB, IT / See 2.1.1
2.1.5.2.7 / VERTICAL VELOCITY or A/V LENGTH/WIDTH CODE Field / IB, IT / See 2.1.1
2.1.5.2.7.1 / Encoding as “Vertical Velocity” Form / IB, IT / See 2.1.1
2.1.5.2.7.1.1 / “Vertical Velocity Source” Subfield / IB, IT / See 2.1.1
2.1.5.2.7.1.2 / “Vertical Velocity Sign” Subfield / IB, IT / See 2.1.1
2.1.5.2.7.1.3 / “Vertical Rate” Subfield / IB, IT / See 2.1.1
2.1.5.2.7.2 / Encoding as “A/V Length and Width Code” Form / IB, IT / See 2.1.1
2.1.5.2.8 / UTC Field Encoding / IB, IT / See 2.1.1
2.1.5.2.9 / Reserved Bits / IB, IT / See 2.1.1
2.1.5.2.10 / Reserved Byte 18 of Payload Type Zero / IB, IT / See 2.1.1
2.1.5.3 / STATE VECTOR Element (For TIS-B) / IB, IT / See 2.1.1
2.1.5.3.1 / TIS-B SITE ID Field Encoding / IB, IT / See 2.1.1
2.1.5.3.2 / Encoding for All Other Fields / IB, IT / See 2.1.1
2.1.5.4 / MODE STATUS Element / IB, IT / See 2.1.1
2.1.5.4.1 / EMITTER CATEGORY and CALL SIGN CHARACTERS #1 and #2 / IB, IT / See 2.1.1
2.1.5.4.2 / CALL SIGN CHARACTERS #3, #4 and #5 / IB, IT / See 2.1.1
2.1.5.4.3 / CALL SIGN CHARACTERS #6, #7 and #8 / IB, IT / See 2.1.1
2.1.5.4.4 / EMITTER CATEGORY / IB, IT / See 2.1.1
2.1.5.4.5 / CALL SIGN / IB, IT / See 2.1.1
2.1.5.4.6 / EMERGENCY/PRIORITY STATUS Field Encoding / IB, IT / See 2.1.1
2.1.5.4.7 / UAT MANUAL VERSION Field Encoding / IB, IT / See 2.1.1
2.1.5.4.8 / SIL Field Encoding / IB, IT / See 2.1.1
2.1.5.4.9 / TRANSMIT MSO Field Encoding / IB, IT / See 2.1.1
2.1.5.4.10 / Reserved Bits / IB, IT / See 2.1.1
2.1.5.4.11 / NACP Field Encoding / IB, IT / See 2.1.1
2.1.5.4.12 / NACV Field Encoding / IB, IT / See 2.1.1
2.1.5.4.13 / NICBARO Field Encoding / IB, IT / See 2.1.1
2.1.5.4.14 / CAPABILITY CODES Field Encoding / IB, IT / See 2.1.1
2.1.5.4.14.1 / CDTI Traffic Display Capability Subfield / IB, IT / See 2.1.1
2.1.5.4.14.2 / TCAS/ACAS Installed and Operational Subfield / IB, IT / See 2.1.1
2.1.5.4.15 / OPERATIONAL MODES Field Encoding / IB, IT / See 2.1.1
2.1.5.4.15.1 / TCAS/ACAS Resolution Advisory Flag / IB, IT / See 2.1.1
2.1.5.4.15.2 / IDENT Switch Active Flag / IB, IT / See 2.1.1
2.1.5.4.15.3 / Receiving ATC Services Flag / IB, IT / See 2.1.1
2.1.5.4.16 / True/Magnetic Heading Flag / IB, IT / See 2.1.1
2.1.5.4.17 / Call Sign Identification (CSID) / IB, IT / See 2.1.1
2.1.5.4.18 / Reserved Bits / IB, IT / See 2.1.1
2.1.5.5 / AUXILIARY STATE VECTOR Element / IB, IT / See 2.1.1
2.1.5.5.1 / SECONDARY ALTITUDE Field Encoding / IB, IT / See 2.1.1
2.1.5.5.2 / Reserved Bits / IB, IT / See 2.1.1
2.1.5.6 / TARGET STATE Element (Payload Type Codes “3” and “4”) / IB, IT / See 2.1.1
2.1.5.6.1 / TARGET HEADING or TRACK ANGLE INFORMATION Field Encoding / IB, IT / See 2.1.1
2.1.5.6.1.1 / Heading/Track Indicator Flag Encoding / IB, IT / See 2.1.1
2.1.5.6.1.2 / Target Source Indicator (Horizontal) Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.1.3 / Mode Indicator (Horizontal) Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.1.4 / Reserved Bits / IB, IT / See 2.1.1
2.1.5.6.1.5 / Target Heading or Track Angle Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.2 / TARGET ALTITUDE INFORMATION Field Encoding / IB, IT / See 2.1.1
2.1.5.6.2.1 / Target Altitude Type Flag Encoding / IB, IT / See 2.1.1
2.1.5.6.2.2 / Target Source Indicator (Vertical) Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.2.3 / Mode Indicator (Vertical) Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.2.4 / Target Altitude Capability Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.2.5 / Target Altitude Subfield Encoding / IB, IT / See 2.1.1
2.1.5.6.3 / TARGET STATE Element (Payload Type Code “6”) / IB, IT / See 2.1.1
2.1.5.7 / TRAJECTORY CHANGE Element / IB, IT / See 2.1.1
2.2 / UAT Ground Uplink Message Payload / IB, IT / See 2.1.1
2.2.1 / UAT-Specific Header / IB, IT / See 2.1.1
2.2.1.1 / GROUND STATION LATITUDE Field Encoding / IB, IT / See 2.1.1
2.2.1.2 / GROUND STATION LONGITUDE Field Encoding / IB, IT / See 2.1.1
2.2.1.3 / POSITION VALID Field Encoding / IB, IT / See 2.1.1
2.2.1.4 / UTC Coupled Field Encoding / IB, IT / See 2.1.1
2.2.1.5 / Reserved Bits / IB, IT / See 2.1.1
2.2.1.6 / APPLICATION DATA VALID Field Encoding / IB, IT / See 2.1.1
2.2.1.7 / SLOT ID Field Encoding / IB, IT / See 2.1.1
2.2.1.8 / TIS-B SITE ID Field Encoding / IB, IT / See 2.1.1
2.2.1.9 / Reserved Bits / IB, IT / See 2.1.1
2.2.2 / Ground Uplink Application Data / IB, IT / See 2.1.1
2.2.2.1 / Information Frames
2.2.2.1.1 / “Length” Subfield Encoding
2.2.2.1.2 / “Reserved” Subfield Encoding
2.2.2.1.3 / “Frame Type” Subfield Encoding
2.2.2.1.4 / “Frame Data” Subfield Encoding
3 / System Timing and Message Transmission Procedures / NVR
3.1 / Avionics / NVR
3.1.1 / Procedures for Processing of Time Data / I / RTCA: UAT-WP-9-08
3.1.1.1 / UTC Coupled Condition
3.1.1.2 / Non-UTC Coupled Condition
3.1.2 / ADS-B Media Access Timing / NVR
3.1.2.1 / The Message Start Opportunity (MSO)
3.1.2.2 / Relationship of the MSO to the Modulated Data
3.1.3 / Time Registration and Latency
3.1.3.1 / Requirements When in Non-Precision Condition and UTC Coupled
3.1.3.2 / Requirements When in Non-Precision Condition and UTC Coupled
3.1.3.3 / Requirements When Non-UTC Coupled
3.1.3.4 / Data Timeout
3.1.4 / Special Requirements for Receiver Implementations
3.1.4.1 / Transmit-Receive Turnaround Time
3.1.4.2 / Receive-Transmit Turnaround Time
3.2 / Ground Station / NVR
3.2.1 / Procedures for Processing of Time Data
3.2.1.1 / UTC Coupled Condition
3.2.1.2 / Non-UTC Coupled Condition
3.2.2 / UAT Ground Station Media Access / NVR
3.2.2.1 / Time Slots
3.2.2.2 / Time Slot Rotation and “Channels”
3.2.2.3 / Transmission of Ground Uplink Message
4 / INTERFACE REQUIREMENTS FOR THE AIRBORNE EQUIPMENT / NVR
4.1 / UAT Receiver Output Requirements (Report Generation)
4.1.1 / Receiver Time of Message Receipt
4.1.2 / Report Assembly on Receipt of ADS-B Message
4.1.3 / Report Assembly on Receipt of Ground Uplink Message
4.1.4 / Message Reception-to-Report Completion Time
4.2 / Mutual Suppression Pulses

Page 1 of 14