About IEC Publications

THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2014 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20
Switzerland www.iec.ch

About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies.

About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published.

Useful links:

IEC publications search - www.iec.ch/searchpub

The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,…).

It also gives information on projects, replaced and withdrawn publications.

IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email.

Electropedia - www.electropedia.org

The world's leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line.

Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: .

IECEE OD-2052 © IEC:2014(E) – 3 –

CONTENTS

CONTENTS 2

1 Scope 3

2 Normative References 3

3 Definitions 3

4 Rules 3

4.1 Deliverables 3

4.2 Expert Task Force (ETF) 4

4.3 Proficiency Testing Program 4

AnnexA - Statement of Test Results Template 7

AnnexB - Statement of Test Results Filled in Example 8

1 Scope

This publication contains the Rules of Procedure of the IECEE Statement of Test Results Energy Efficiency Testing Service (E3). The service is intended to demonstrate the results of testing performed in accordance with IEC Energy Efficiency standards via a Statement of Test Results.

2 Normative References

The following publication contains provisions which, through reference in this text, constitute provisions of these Rules of Procedure.

IECEE 02: Fourteenth Edition 2012-06 IECEE System of Conformity Assessment Schemes for Electrotechnical Equipment and Components Rules of Procedure. Part I: Scheme of the IECEE for Mutual Recognition of Test Certificates for Electrotechnical Equipment and Components (CB Scheme).

3 Definitions

For the purpose of this publication, the definitions of IECEE Definitions apply with the following additions:

E3 / Energy Efficiency
IECEE E3 Service / IECEE Reporting Service for Energy Efficiency
Statement of Test Results / Statement of Test results is a document by which the NCB confirms impartial test results of the IECEE E3 laboratory thus giving confidence to the market.

4 Rules

The Energy Efficiency Testing Service (E3) is operated following the same basic rules of the CB Scheme as specified in IECEE 02 Part 1 and its related Operational Documents (ODs) and Administrative Documents (ADs) with the following additional considerations.

In addition, the following apply.

4.1 Deliverables

The deliverables for this service include a Statement of Test Results (STR) and a Test Report.

The results are incorporated into the IECEE E3 online database.

4.1.1 Statement of Test Results (STR)

A Statement of Test Results (STR) is a document issued by an NCB in conjunction with the attached E3 Test Report. The actual test data shall be stated.

A STR shall be issued for a specific model or models, not a series.

Rationale: As a statement of specific test results, it can only cover the tested model(s). Therefore, the specific model or models have to be mentioned on the STR.

The STR TRF may only use the relevant clauses related to Energy Efficiency and/or the data required by the client.

Upon issuance of an STR, the NCB is responsible for adding the information in the IECEE online system. The contents to be entered are specified by the system.

NOTE: Not all content entered by the NCB is available on the public facing side of the system.

The format for the Statement of Test Results shall be administered by the IECEE Secretariat and any revisions approved by the CMC.

The template for issuing STRs is provided as Error! Reference source not found.. An exemplary filled in STR is available as AnnexB.

4.1.2 Energy Efficiency Testing Service (E3) Online Database

The Energy Efficiency Testing Service (E3) online database is administered by the IECEE Secretariat with test results submitted for inclusion by the NCB. The results reflect a partial view of the details of the officially issued Statement of Test Results (STR).

4.2 Expert Task Force (ETF)

Based on the needs for specific technical expertise for this service, specific CTL ETFs for E3 may be established.

4.3 Proficiency Testing Program

A proficiency testing program shall be provided specific to E3TS and administered in accordance with CTL OP 103.

AnnexA- Statement of Test Results Template

/ Ref. No.
IEC System of Conformity
Assessment Schemes for
Electrotechnical Equipment and
Components (IECEE) / STATEMENT OF TEST RESULTS
Product
Name and address of the applicant
Name and address of the manufacturer
Name and address of the factory
Ratings and principal characteristics
Trademark (if any)
Model / Type Ref.
Additional information (if necessary)
/ Additional Information on page 2
A sample of the product was tested and in
accordance with the following IEC (standard(s) as resumed in the table on page 3:
With details shown in the Test Report Ref. No. which forms part of this Statement of Test Results
This product was tested to determine the performance result in accordance with the relevant standard(s).
Participation in the Statement of Test Results (STR) service is for Issuing NCBs only. As the result of testing is a demonstration of test results in accordance with IEC test methods, Recognizing NCBs do not apply. Members and other interested stakeholders may determine the suitability and potential further use of such results. As a result, specification of National differences is not applicable
This Statement of Test Results is issued by the National Certification Body
Issue Date: / Signature:
/ Ref. No.
Additional information (if necessary)
Issue Date: / Signature:

Issued 2014-04 1/3

Performance
item / Energy
Consumption
Criteria / Energy
Performance
Criteria / Other
Energy
Efficiency
Criteria / Condition / Voltage / Frequency / Performance
Result
Additional information (if necessary)

Issued 2014-04 3/3

AnnexB - Statement of Test Results Filled in Example

INTERNATIONAL IEC SYSTEM OF CONFORMITY ASSESSMENT

ELECTROTECHNICAL SCHEMES FOR ELECTROTECHNICAL

COMMISSION EQUIPMENT AND COMPONENTS (IECEE)

IECEE Secretariat c/o IEC

3, rue de Varembé 3, rue de Varembé

PO Box 131 PO Box 131

CH-1211 Geneva 20 CH-1211 Geneva 20

Switzerland Switzerland

Tel: + 41 22 919 02 11 Tel: + 41 22 919 02 11