SECTION 10440

INTERIOR SIGNAGE

Display hidden notes to specifier by using “Tools”/”Options”/“View”/”Hidden Text” or

“More Commands”/”Display”/”Hidden Text”

** NOTE TO SPECIFIER ** APCO Signs; interior sign systems.

.

This section is based on the products of APCO Signs, which is located at:

388 Grant St. S.E.

Atlanta, GA 30312

Toll Free Tel: (877) 988-2726

Tel: (404) 688-9000

Email:

Web:

{click Here} for additional information.

Based in Atlanta, GA with sales offices, representatives and dealers throughout the US and around the globe, APCO has been providing innovative sign solutions since 1966. With a solid infrastructure and a proven track record of performance, your APCO signage investment is secured with product availability and service for years to come.

Design and innovation have been at the core of APCO's business since our founding in 1966. It is our passion! With an unprecedented 10 awards for Product Design Excellence as presented by the Industrial Designer's Society of America, APCO continues to offer the broadest range of innovative sign solutions in the industry. All APCO products are built to last, easy to maintain and backed by written warranties.

Nothing happens without good people, and at APCO we have the best in the industry. We do what it takes to ensure complete customer satisfaction, standing by the APCO Golden Rule: If we were the customer, what would we expect?

PART 1 GENERAL

1.1SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

  1. Complete, updatable curved aluminum frame system including identification, personnel, directory, directional and regulatory signage options.

1.2RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

  1. Section 03300 - Cast-in-Place Concrete.
  1. Section 04220 - Concrete Unit Masonry.
  1. Section 08110 - Steel Doors and Frames.
  1. Section 08210 - Wood Doors.
  1. Section 09260 - Gypsum Board Systems.
  1. Section 09510 - Acoustical Ceilings.
  1. Section 09900 - Painting.
  1. Section 09960 - Vinyl Wall Covering.

1.3REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

  1. ANSI A117.1: Providing Accessibility and Usability for Physically Handicap People, 1986 edition.
  1. Department of Justice, Office of the Attorney General, "Americans with Disabilities Act", Public Law 101-336, (ADA).
  1. 2010 Standards for Accessible Design (SAD): The updated ADAAG (ADA Accessibility Guidelines), effective on March 15, 2011 and made mandatory on March 16, 2012.

1.4SYSTEM DESCRIPTION

  1. Signage under this section is intended to include items for identification, direction, control, and information of building where installed as complete integrated system from a single manufacturer.
  1. ADA design requirements:
  2. Provide signage that conforms to the requirements of all regulatory agencies holding jurisdiction.
  3. Comply with all applicable provisions of the 2010 Standards for Accessible Design (the updated ADA Accessibility Guidelines, ADAAG - effective in March 2011. Requirements include, but are not limited to the following:
  4. Tactile copy must be all upper case and raised at least 1/32”. Tactile characters must be sans serif, not italic, not oblique, script or highly decorative.
  5. The stroke width of the upper case “I” has to be 15% of the letter height or less. The character width of the uppercase “O” must be between 55% and 100% of the height of the corresponding uppercase “I”.
  6. The copy height for tactile information must be between 5/8” and 2”. If separate visual characters are provided, raised characters can be ½” and need not contrast with the background.
  7. The distance between characters on tactile copy must be a minimum of 1/8” and a maximum of 4 times the character stroke width. These distances are measured between the closest points of adjacent characters.
  8. Spacing between lines of tactile copy needs to be a minimum of 135% and a maximum of 170% of the corresponding upper case “I” height (measured from baseline to baseline).
  9. Braille must be Grade II and positioned directly below the corresponding raised characters. If text is multi-lined, Braille is placed below the entire boyd of text and separated 3/8” from any other tactile characters and 3/8” minimum from raised borders and decorative elements.
  10. Visual characters and symbols, and their background, are to have a non-glare finish. The color of raised characters must contrast as much as possible with their background to make sure signs are more legible for persons with low vision.
  11. Pictograms, selected from International Standards, are to be located within a 6” vertical void and accompanying text descriptions are to be located directly below the pictogram.

1.5SUBMITTALS

  1. Submit under provisions of Section 01300.
  1. Product Data: Manufacturer's data sheets on each product to be used, including:
  2. Manufacturer's product literature indicating units and designs selected.
  3. Evidence of manufacturer's computerized data retrieval program for tracking of project for sign typography, message strip requirements and other pertinent data from schedule input to final computerized typography on finished product.
  4. Preparation instructions and recommendations.
  5. Storage and handling requirements and recommendations.
  6. Installation methods.
  1. Samples: One full size sign sample illustrating the design, construction, colors, typestyles, mounting method and other details as specified. Provide sample in small size sign.

NOTE TO SPECIFIER ** Delete provision not required.

  1. Samples will be returned for use in Project.
  2. Samples will not be returned for use in Project.
  1. Shop Drawings:
  2. Indicate materials, sizes, configurations, and applicable substrate mountings.
  3. Typography sample for message strips and headers copy.

NOTE TO SPECIFIER ** Option. Delete if not required.

  1. Artwork for special graphics.

NOTE TO SPECIFIER ** Option. Delete if not required.

  1. Artwork for special headers.
  1. Signage Schedule: Complete with location of each sign and the required copy/text.
  1. Sign Program Maintenance Plan:
  2. Manufacturer shall provide details of software and system of pre-perforated and color coated paper sign inserts allowing client to update and maintain signage graphics in-house.
  3. Manufacturer shall provide details of an Online Reordering & Maintenance Application whereby the client can submit sign reorders online and store relevant project information such as sign type drawings, message schedules and product instructions.
  1. Contract close out:
  2. Furnish appropriate checklist for aiding in reordering after Date of Substantial Completion. Maintain computer schedule program for five years for ordering new signage required by Owner.
  3. Maintenance data and cleaning requirements for exterior surfaces.

NOTE TO SPECIFIER ** Manufacturer has available software program for personal computers - pc, called "SignWord Pro" enabling end user to produce graphics on insert or sign face. Information in main catalog, Call manufacturer directly at listed telephone number for more info. Delete if not required.

  1. Furnish one complete SignWord Pro software package compatible with Windows XP or newer.

NOTE TO SPECIFIER ** Option. Delete if not required.

1.6QUALITY ASSURANCE

  1. Manufacturer Qualifications:
  2. Work required under this section from manufacturer regularly engaged in work of this type and scope for a minimum of 5 years.
  3. Maintain computer link between schedule input and computerized typography production.
  1. Installer Qualifications: Trained and authorized by manufacturer for installations of required scope and product.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

  1. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
  2. Finish areas designated by Architect.
  3. Do not proceed with remaining work until workmanship, graphics, and installation are approved by Architect.
  4. Refinish mock-up as required to produce acceptable work.

1.7DELIVERY, STORAGE, AND HANDLING

  1. Package signs to prevent damage during shipment, handling, storage and installation. Products are to remain in their original packaging (unless otherwise specified) until removal is necessary for installation.
  1. If installation site is not ready for signage upon delivery, store signs in a dry, air-conditioned environment.
  1. Handle signage in accordance with manufacturer’s instructions.
  1. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.8PROJECT CONDITIONS

  1. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.9SEQUENCING AND SCHEDULING

  1. Schedule system installation after room finishes and fixtures have been completed.

1.10WARRANTY

  1. Product Warranty: Provide manufacturer’s warranty against defects in materials and workmanship for a period of one year.

PART 2 PRODUCTS

2.1MANUFACTURERS

  1. Acceptable Manufacturer: APCO Signs; 388 Grant St. S.E., Atlanta, GA 30312. ASD. Toll Free Tel: (877) 988-2726. Tel: (404) 688-9000. Fax: (404) 577-3847. Email: . Web:

2.2ACCEPTABLE PRODUCT

  1. Arcadia Curved Face Sign System

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

  1. Substitutions: Not permitted.
  1. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.3SYSTEM REQUIREMENTS

  1. General:
  2. Sign system shall feature solutions for all required sign types, including but not limited to wall mounted personnel signs, work station personnel signs, primary room identification, directories, directional, overhead signs, projection wall signs, free standing signs, restroom signs, regulatory and information signs, stair signs and changeable slide conference room signs.
  3. Signs within the system shall feature the same family of components and convey a uniform look throughout.
  1. Features:
  2. Updatability: Signs shall allow for easy updating of message inserts without the need to replace the entire sign assembly. System shall offer a solution for easy in-house updating of laser printed sign inserts for all sign types, including personnel signs, directories and directional signs.
  3. Mounting: Signs shall accommodate installation via fully concealed mechanical fasteners.
  1. Graphics and Typography: As selected from manufacturer’s standards. Reference sign drawings.
  1. Colors and Finishes: As selected from manufacturer’s standards. Reference sign drawings.
  1. ADA Compliance: Sign system shall comply with all applicable provisions of the 2010 Standards for Accessible Design (the updated ADA Accessibility Guidelines, ADAAG), effective in March 2011. This includes requirements regarding which sign types require Braille/tactile features, character heights, raised character spacing, raised character stroke width, color contrast and installation locations and mounting heights within the facility.
  1. Materials and Construction:
  2. Frames/Holders: Curved face sign frames shall be constructed of extruded aluminum, alloy 6063-T6, with minimum 3/4” (19 mm) wide contour edge detail. Top/bottom caps shall be aluminum. Plastic caps will not be acceptable. Aluminum extrusions shall be extruded in the USA. Modular sign holders shall accommodate any type of flexible insert material up to .095 inch (2.4 mm) thick.
  3. ADA-compliant components shall be APCO’s DP-Tactile process direct-print, UV-cured, 1/32” thick tactile characters and fully domed Braille printed on a PETG or Acrylic plaque.
  4. Fasteners: Signs shall be able to accommodate fully concealed mechanical fasteners.

NOTE TO SPECIFIER ** Arcadia is a curved-face aluminum sign system featuring unique, contour-shaped edge profiles and available in a wide range of sizes and configurations including wall signs, ceiling signs and free-standing kiosks. The Arcadia system is designed to accommodate a variety of modular sign inserts and displays, including printed paper, injection molded message strips, ADA plaques and more. Arcadia aluminum extrusions are 100% recyclable. Arcadia is also compatible with APCO's Elements2 range of decorative components and backer shapes.

2.4SIGN SYSTEM DETAILS – USE SECTIONS A&B or B&C Following and Delete the Non-Relevant Sections

NOTE TO SPECIFIER ** If Arcadia system design and specifications are generated by use of APCO’s online Design Studio 2and/or feature decorative backers, use sections A-B following and delete sections C-D, or portions of C-D, as applicable. If the specifications and design are custom generated, without backers, use section C-D following and delete sections A-B.

  1. Product: Curved Arcadia Signs as Designed Using APCO’s Online Design Studio 2: Reference drawings for location of colors, finishes, sizes and details.
  2. Curved aluminum Arcadia Series 1000 frames for wall-mounts and Series 2000 for overheads, with a wide range of graphics inserts and displays. Reference drawings for colors, finishes, typestyles and other details. Reference sign schedule for exact messages.
  3. Curved Aluminum Frame Finish:

NOTE TO SPECIFIER ** Delete finish(es) not required.

  1. Satin anodized aluminum finish.
  2. Painted Finish: Manufacturer’s Standard: ______
  3. Painted Finish: Custom Color: ______
  1. Decorative Divider Bar:

NOTE TO SPECIFIER ** Delete options not required.

  1. No Divider Bar
  2. Polished Acrylic Divider Bar with 1st surface applied color.
  3. Polished Acrylic Divider Bar with subsurface applied color. Colors selected from manufacturer’s standards. Reference drawings.
  1. Core SignTypes: Other signtypes, including ceiling and freestanding signs, may be included within the Project. See Signage Schedule and/or drawings for details.

NOTE TO SPECIFIER ** Delete sign type(s) not required.

  1. SignTypeAR_-A4 Personnel Sign – Small. Nominal 2-3/8”h x 8-1/2”w ID.
  2. SignType AR_B12 Room/Personnel ID. Nominal 7-1/16”h x 8-1/2”w ID.
  3. SignType AR_B17 Room ID. Nominal 7-1/16”h x 6”w ID.
  4. SignType AR_R1 Restroom ID. Nominal 8-1/2”h x 6”w ID.
  5. SignType AR_B18 Room ID - User Lettered. Nominal 6-1/8”h x 8-1/2”w ID.
  6. Sign Type AR_C1.R Patient Information. Nominal 14”h x 6”w ID.
  7. SignTypeAR_F6 Stair ID. Nominal 9-1/16”h x 8-1/2”w ID.
  8. SignTypeAR_B20 Room ID. Nominal 9-1/16”h x 8-1/2”w ID.
  9. SignTypeAR_B28 Room ID – Large. Nominal 14-1/4”h x 8-1/2”w ID.
  10. SignTypeAR_B22 Conference Room ID. Nominal 9-1/2”h x 8-1/2”w ID.
  11. SignType AR_R.P1 Overhead Wall Projection. Nominal 8-1/2” x 8-1/2” ID.
  12. SignType AR_D5 Directional – Medium. Nominal 20-1/2”h x 11”w ID.
  13. SignTypeAR_E3 Fire Evacuation. Nominal 11-1/2”h x 11”w ID.
  14. SignTypeAR_B4 Tactile Room ID – Small. Nominal 4”h x 8-1/2”w ID.
  15. SignTypeAR_D.O1 Overhead Ceiling. Nominal 8-1/2”h x 36”w ID.
  16. Sign Type AR_D10 Directional – Large. Nominal 25-3/4”h x 17”w ID.
  17. Sign Type AR_K5 Directory – Small. Nominal 14-1/2”h x 11”w ID.

NOTE TO SPECIFIER ** Delete decorative backer style(s) not required.

  1. Decorative Backer Shape/Style:
  2. None. Modular system only with no decorative backer.
  3. Arc1

c.Arc2

d.Arc3

e.Scroll 1

f.Scroll 2

g.Scroll 3

h.Ortho 1

i.Ortho 2

j.Ortho 3

NOTE TO SPECIFIER ** Delete decorative backer finish(es) not required.

  1. Elements2 Decorative Backer Finishes/Patterns – Top Layer.
  2. Not applicable. Modular system only, with no backers.
  3. Direct-Print Wood Pattern: ______(Top/Bottom Layer)
  4. Direct-Print Stone Pattern: ______(Top/Bottom Layer)
  5. Translucent – ACF Cool Frost (Top Layer)
  6. Translucent – w/ Direct-Print Pattern: ______(Top/Bottom Layer)
  7. Direct-Print Pattern/Image: ______(Top/Bottom Layer)
  8. Solid Color – Painted: ______(Top/Bottom Layer)
  1. Graphics:
  2. Type Sizes: Selected from manufacturer's standard sizes indicated in SCHEDULE for particular units; meet ADA requirements for letter proportions and sizes.
  3. Typography: Reference signage schedule and drawings for details. Font(s) selected from manufacturer’s standards unless otherwise specified. All text and graphics shall be a true representation of the typeface(s) and/or graphicsspecified. Letter spacing and interline spacing shall be set by the manufacturer.

NOTE TO SPECIFIER ** Delete typeface(s) not required.

  1. HelveticaNeue-Roman (HR)
  2. Futura Book (FUB)
  3. Arial (AR)
  4. Frutiger-Normal (F55)
  5. Myriad Pro (MP)
  6. Typeface(s) as indicated in SCHEDULES Article and Drawings.

NOTE TO SPECIFIER ** Delete type code(s) not required.

  1. Type Code(s): Uppercase.
  2. Type Code(s): Initial caps.
  3. Type Code(s): Combination.
  4. Type Code(s): Indicated in SCHEDULES Article.
  5. Imprint Colors: Selected by Architect from manufacturer's standard direct-print colors and indicated in SCHEDULE; color contrast background colors in accord with ADA requirements.
  6. Copy/Message List: Indicated in SCHEDULE.
  7. Reference drawings and Signage Schedule for details.
  8. All text and graphics shall be a true representation of typeface(s) and/or graphics specified.

NOTE TO SPECIFIER ** Delete sections C-D if not applicable.

  1. Curved-Face Arcadia Sign System as custom specified/designed. Reference drawings for location of colors, finishes, sizes and details. Reference signage schedule for sign text.

NOTE TO SPECIFIER ** Delete options not applicable.

  1. Arcadia Series 1000 (Contour Profiles at Left/Right of Sign).

NOTE TO SPECIFIER ** Delete finishes not required.

  1. Frame Finish

1)Natural Satin Anodized

2)Painted Finish – Manufacturer’s Std Color: ______

3)Painted Finish – Custom Color: ______

  1. Frame Sizes (widths) selected from Manufacturer’s Standards. Heights selected from Manufacturer’s standards and determined by insert/display components within each frame.

1)4” (102 mm) ID width, (ARH100)

2)6” (150 mm)ID width, (ARH150)

3)8-1/2” (215 mm)ID width, (ARH215)

4)11” (280 mm) width, (ARH280)

5)17 inches (430 mm) width, (ARH430)

6)22 inches (560 mm) width, (ARH560)

NOTE TO SPECIFIER ** Delete insert/display components not applicable.

  1. Insert/Display components to include:

1)Non-Glare Clear Lens (ARI-CL) with subsurface digitally printed graphics (ADO).

2)Non-Glare Lens (ARI-CL) with subsurface laser printed SignWord paper insert (SWAR).

3)Solid color insert with direct-print graphics (ARI).

4)PETG Plaque with APCO’s DP-Tactile process direct-print, UV-Cured tactile characters and fully domed Braille. (ARI-DPT).

5)Flatbed direct-print or painted band* with APCO’s DP-Tactile process direct-print UV-cured raised characters and Braille, applied to a non-glare acrylic lens. (ARI-CL-ADA-DPT) (* For non-metallic colors, band is printed directly onto non-glare lens. For metallic colors, a painted band is applied to a non-glare lens.)

6)Injection Molded Message Bands (ARI-MB)

7)Changeable Slide Insert (ARI-SL)

8)Literature Holder (ARI-LH)

9)LCD Display – for Series 3300 Kiosk Only (AR-LCD)

NOTE TO SPECIFIER ** Delete decorative display components not applicable.

  1. Standard decorative display components to include:

1)Decorative Metal – Capsules (DMP2)

2)Decorative Metal – Micro Perf (DMP3)