H685/H820 WAN-R45 WiFi-Client and Cell Failover Redundancy
H685/H820 WAN-R45 WiFi-Client and Cell Failover Redundancy
Typical Simple Diagram
Step 1) Confirm H685/H820 can be online if it uses WAN CELL Network. Please follow the H685/H820 manual for the details.
Step 2) Confirm H685/H820 can be connected to upper CISCO Router WiFi AP.
1) Check the WiFi AP’s info first. The info will be configured in H685/H820 WiFi Client.
2) Switch H685/H820 router to “AP Client” mode.
3) Flash the H685/H820 web at the browser.
4) Configure the WiFi AP of H685/H820.
Notes: Do not forget to click “Apply” button. Be patient to wait the WiFi Client Feature is activated.
5) Configure the WiFi AP of H685/H820. User the parameter info from the upper WiFi AP.
6) Select “DHCP (Auto config)”, and click “Apply” button.
Notes: With DHCP, the upper WiFi AP must support DHCP server feature. Otherwise please use the fixed type.
7) The H685/H820 router will connect to upper WiFi AP automatically. And indicates the following.
Notes: if your H685/H820 cannot connect the upper WiFi AP, please check if the problem is from:
a) The WiFi parameters of H685/H820 and upper WiFi AP is not matched.
b) Check the H685/H820 router’s WLAN MAC if correct. The correct WLAN MAC (BSSID) should be even digit at the last two digits. For example the following BSSID is 08:66:01:00:63:66, the last two digits is 66, which is a even digit. If it’s odd digits, please contact our support for help.
Step 3) Confirm H685/H820 can be connected to Line Broadband Modem with RJ45.
Once the H685/H820 gets the connection from the upper line broadband router/modem, it will indicates the WAN IP.
Step 4) Configure the Link Back feature.
Notes:
For the Wired WAN-RJ45, we use DHCP for example. If users want to use “Static IP” or “PPPoE”, please configure the correct one same as the “DHCP”.
E-Lins Technology Co.,Limited
Tel: +86-755-29230581 E-mail: / www.szelins.com www.e-lins.com