To get help on template, choose HelpTemplate Help or click toolbar button .
Company Name and Logo
Testing Team
Test Case Template
Author:QATutorial.com
Confidentiality:CONFIDENTIAL & PRIVILEGED. This document contains confidential and privileged trade secrets and other information of Company Name and as such may not be disclosed to others not employed by Company Name. All rights reserved.
Testing Team
Test Case Template
Company Name and Logo
1 (8)
Table of contents
Revision history
1 Test Information
1.1 Test type
1.2 Item Under Test
1.3 Test Personnel
2 Test Summary
2.1 Results
3 Background
3.1 Purpose and Scope of the Test
3.2 Additional Information
3.3 Experience required
3.4 Test Items / Equipment Needed
3.5 Estimated test time
3.6 Reference Documents
3.7 Definitions
4 Preparing the Test Environment
4.1 Equipment Setup
4.2 Equipment Checks
4.3 Test Instructions
5 Test Cases
5.1 Title here
6 Traceability matrix
Revision history
Date / By / Description of changesdd-mmm-yyyy / Name of Editor / Change 1
dd-mmm-yyyy / Name of Editor / Change 2
dd-mmm-yyyy / Name of Editor / Change 3
dd-mmm-yyyy / Name of Editor / Change 4
1 Test Information
1.1 Test type
___ Full Test___ Regression Test
1.2 System Under Test
System name: ______Staple the recorder listing
Version:______of the configuration here
1.3 Test Personnel
Name: ______Date: ______Time/h: ______
Name: ______Date: ______Time/h: ______
Name: ______Date: ______Time/h: ______
2 Test Summary
2.1 Results
Conclusion of the test: PASS / FAIL
Identifiers of the observations recorded:
______
______
Total number of cases failed: ______
3 Background
3.1 Purpose and Scope of the Test
Explain what is going to be tested in this test procedure and what are the requirements covered, where the requirements can be found.
3.2 Additional Information
This is the place where you can tell where the manuals or other user instructions can be found.
If there is something special(e.g. known bug that cannot be fixed) in the software that you want to tell the tester, it can be told here.
3.3 Experience required
Evaluate the knowledge of the person that is needed to perform the test. E.g. what kind of knowledge is needed - technical, certifications, etc
3.4 Test Items / Equipment Needed
What is needed to perform the test.
3.5 Estimated test time
Estimate how long it takes to perform the test procedure.
3.6 Reference Documents
[RD1]Compatibility Requirements, SRS_Compatibility.doc
[RD2]Compatibility Guidelines document, compatibility.doc
3.7 Definitions
SRSSoftware requirement specification
UCUse Case
TCTest Case
4 Preparing the Test Environment
4.1 Application Setup
Explain the needed configuration and how to set it up. Also, explain operations and steps to reach the normal start condition for the cases.
4.2 Equipment Checks
Possible checks that has to be done to verify that the Application is functional before the tests can be started.
4.3 Test Instructions
If compatibility is tested with this test case document (SVP), see the compatibility test instructions in projectname\documents\ \guidelines\ xxxxxx.doc
Comments:______
______
______
______
5 Test Cases
5.1 Title here
Special Instructions
NONE
Test Case ID / TC_FUNCT_01Description / Tests the Login Screen
Applicable for / IE6, Firefox
Requirements / REQ_FUNCT_01
Initial Conditions / Equipment is set up as per Equipment Setup section.
Step / Full / Regr / Task & Expected Result
1 / Open the login screen/menu.
2 / Verify that the login screen is displayed on both IE6 and Firefox. / Pass / Fail
3 / Enter Username and Passowrd.
4 / R / Verify that the username can be entered. / Pass / Fail
5 / R / Verify that the password is masked and can be entered. / Pass / Fail
6 / R / Verify that an ok and reset button is displayed. / Pass / Fail
7
Comments:
______
______
______
6 Traceability matrix
Note: keep this as the last page of the document, write test cases to the previous pages.
Requirement id / Test case id / NoteREQ_FUNCT_01 / TC_FUNCT_01
Tester:Date: