Tender Report forSupply and installation of LAN in *Biomedical Imaging and

Bioinformatics Lab*

General Scope of Work:Supply and installation of Computer Laboratory setup in MIU

Location of Installation:

ISI Kolkata,

203, B.T. Road,

Kolkata – 700108,

West Bengal, INDIA

BILL OF MATERIALS

Sl no. / Item / Quantity
1 / Category 6A Information Outlet / 22 pc
2 / Cat 6A UTP Cable ( Each box 305mtrs) / 1 box
3 / Cisco UC Phone 6945 Charcoal Standard Handset / 1 pc
4 / Cat 6A Patch Panel (Unloaded) / 1 pc
5 / Single Port Face Plate / 11 pc
6 / Back Box / 11 pc
7 / Service
8.(i) / Cat 6A cable Laying through PVC conduit including supply of PVC Conduit / 300mtr
8.(ii) / Cat 6A I/O termination / 22
8.(iii) / Face Plate & Back Box installation / 11

DETAIL SPECIFICATION

CAT 6A Information Outlet

1.Features

  1. Electrical performance guaranteed to meet or exceed the channel specifications of Amendment 1 to ISO/IEC 11801 : 2002 Class EA and ANSI/TIA-568-C.2 Category
  2. 6A when used as part of a CAT 6 A UTP Channel in registered installations
  3. Crossing of straddling pair contacts enables efficient Alien Crosstalk reduction in the channel
  4. Should be non-keystone product.
  5. Snaps into standard faceplates, surface-mount boxes, consolidation point boxes, and Modular Panel.
  6. Can also be mounted either at 90 degrees (straight) or 45 degrees (angled) in any faceplate
  7. Universal design and label supports both T568 A & B wiring
  8. IDC connector terminations on rear of base allow quick and easy installation of 22 to 24 AWG cable
  9. UL® and cUL listed
  10. Can support network line speeds up to at least 10 gigabits per second
  11. Qualifies for the 20-Year Extended Product Warranty and Applications Assurance
  12. RoHS Compliant

1.Physical Specifications:

  1. Dimensions: 0.8 x 0.8 x 1.2 in (2.0 x 2.0 x 3.1 cm) Universal A/B labeling
  2. Plastic Material: High-impact, flame retardant, thermoplastic
  3. Flammability Rating: UL-rated 94 V-0
  4. Operating Temperature: 1 4°F to 1 40°F (-10°C to 60°C)
  5. Storage Temperature: -40°F to 1 58°F (-40°C to 70°C)
  6. Humidity 95% (non-condensing)
  7. Contact Material & Planting: Copper alloy, Planting: Gold over nickel
  8. Under plate. Insulation displacement connectors accept solid or
  9. Stranded wire (7strands)
  10. Nominal Solid Conductor Diameter: 0.016 in to 0.025 in
  11. (0.40 mm to 0.64mm) (26 to 22 AWG)
  12. Nominal Stranded Conductor Diameter: 0.020 in to 0.025 in
  13. (0.51 mm to 0.64 mm) (24 to 22 AWG)
  14. Insulation Size: 0.030 in to 0.046 in (0.76 mm to 1.1 7 mm)
  15. Outlet Wires: Copper alloy, 50 micro-inch (1.27 microns) hard gold plating over 1 00 micro-inch (2.54 microns) nickel under plate
  16. Plug Retention Force: 30 lbs (133 N) minimum between modular plug and jack
  17. Plug Insertion Life: 750 minimum insertions of an 8-position IEC 60603-7 compliant plug

CAT 6A Cable

1.Features

  1. Outer diameter 0.285 in. (7.24mm)
  2. Packaged in we-tote box.
  3. 4 pair construction with finned inner jacket surface and isolator provides the extra margin of performance required for high band-with applications
  4. The cable should be round in shape
  5. In the Channel, the cable length should be as low as 3 meter and 5 meter in total channel.
  6. The Channel should
  7. Non-Plenum construction
  8. ETL Listed – Riser rated CMR and CMG
  9. Electrical performance guaranteed to meet or exceed the channel specifications of Amendment 1 to ISO/IEC 1180:2001 Class EA, and ANSI/TIA-568-C.2 Category 6A up to 500 MHz when used as part of a CAT 6 A U/UTP Channel installations.
  10. Can support network line speeds up to 10 gigabits per second
  11. Qualifies for the 20- Year Extended Product Warranty and Applications Assurance
  12. RoHS Compliant
  13. The cable, patch cords and connecting hardware shall be UTP components that do not include internal or external shields, or drain wires.

Category 6A Patch Panel

1.1Category 6A modular patch panels

  1. 24 port patch panels with 110 IDC connector terminations on rear
  2. The Electrical performance guaranteed to meet or exceed the channel specifications of Amendment 1 to ISO/IEC 11801:2002 Class EA and ANSI/TIA-568-C.2 Category
  3. The panel shall have vertical and horizontal cord organizers available as to improve patch cord management.
  4. The panel shall be available in 24-port configurations with universal A/B labeling and 110 connector terminations on rear of panel allowing for quick and easy installation of 22 to 24 AWG cable.
  5. The panel shall have a black powder finish over high-strength steel.
  6. The pane; shall be equipped with s removable rear mounted cable management bar and front and rear labels.
  7. The panel shall be UL listed, UL-C certified and ACA approved.
  8. The panel shall support network line speeds in excess of 10 gigabit per second and be backward compatible with Category 6, 5e, 5 and 3 cords and cables.
  9. The panels shall be either wall or 19-inch rack mountable.

2.Electrical Specifications:

  1. Insulation Resistance: 500 MΩ minimum
  2. Current Rating: 1.5 A at 68°F (20°C)
  3. Dielectric Withstand Voltage: 1,000 VAC RMS, 60 Hz minimum, contact-to-contact and 1,500 VAC RMS, 60 Hz minimum to exposed conductive surface
  4. UL and cUL Listed

Faceplates

Flush-mounted modular faceplates

  • Faceplates shall be available in single, duplex, triplex, quadplex, orsixplex arrangement in a single gang configuration.
  • Faceplate outlet openings shall be numbered on both sides for installation and maintenance identification.
  • Faceplates shall be High-impact, flame retardant, UL-rated 94V-0 thermoplastic.

Consortium:

If the Bidder is not a manufacturer he should provide documentary evidence (e.g. Manufacturers’ Authorization Form) for having tied up with all the participating agencies.

Bid Currencies:

Bids are to be quoted in Indian Rupees only.

Cancellation of Tender:

1. The Institute may cancel the tender processing at any point of time prior to the issuance of purchase order without assigning any reason whatsoever for unforeseen and unavoidable circumstances.

2. The Institute may also cancel the tender processing for want of any participating Bidder or if all the participating Bidders fail to qualify eligibility in terms with technical or other reasons.

Technical & commercial bids should be submitted in separate sealed envelopes mentioning the contents on it. Any Technical Bid not containing the above specifications may be rejected. The Technical Bid should not contain any price information, such proposal will be rejected.

Bill of Material

(To be included in Technical Bid)

The Bidder should provide Bill of Material (details of all Modules / Components of Software including those bought-out, off-the-shelf or third-party products / items required) Module-wise, in the following format.

Module/Item / Description / Make/ Model/ Version Part Number / Principal Vendor/
Manufacturer / Quantity/ No. of Licenses per installation

Signature of Bidder :

Name :

Business address :

Place :

Date:

Bill of Material

(To be included in Commercial Bid)

Module/ Item / Make/ Model/ Version Part Number / Principal Vendor/
Manufacturer / Quantity/ No. of Licenses per installation / Unit Price / Total Price without Tax / Tax % / Tax Estimate / Total Price with Tax

Signature of Bidder :

Name :

Business address :

Place :

Date:

Quotation Address :

To

Prof. PradiptaMaji

Machine Intelligence Unit

Indian Statistical Institute

203 B.T. Road, Kolkata – 700108