Exhibit 7 : Service Order for Start-Up/Commissioning Services

TENDER NO. PML/C304/ P2-107

PROVISION FOR THE SUPPLY OF THE IN-FIELD PRODUCTION FLOWLINES AND FLEXIBLE RISER ASSEMBLIES FOR CENDOR PHASE 2 BLOCK

PM304

EXHIBIT III

SCHEDULE OF PRICES AND RATES

1.0GENERAL

1.1SUPPLIER shall quote all-inclusive prices as per specified format and in accordance with each specification Exhibit II TECHNICAL SPECIFICATIONS.

1.2SUPPLIER’s prices for GOODS herein shall be all inclusive of all applicable taxes. However in the event that any materials and equipments are under tax exemption provision, the prices shall exclude such taxes.

1.3Price quoted shall be based on quantity specified herein below. COMPANY has the right to increase or decrease the quantity based on the quoted prices.

1.4Lump sum price quoted shall include but not be limited to project management, detailed design, procurement of materials, manufacturing, inspection and testing, reel lift rigging, reels rental for 2months FOB port of export basis, insurance during transit, overhead and profits and delivery as per the described delivery term. COMPANY shall not entertain any costs not specified herein in this EXHIBIT III.

2.0PAYMENT

2.1The CONTRACT currency is RMor US Dollars. Prices quoted in any other currency shall be subject to Article 11 Invoicing and Payment of the PURCHASE ORDER terms and conditions.

2.2Payments under the terms of the Purchase Order shall be made in accordance to the instruction in EXHIBIT IV titled "ADMINISTRATIVE PROCEDURES".

2.3SUPPLIER may propose the progress payment under the Purchase Order.

3.0COMMISSIONING / START-UP SPARE PARTS

The supplier will be required to provide the commissioning / start-up spare parts and repair kits as per Table 2. Bidder shall list down the proposed spare parts and expand table 2 as necessary for COMPANY review and evaluation.

4.02 -YEARS OPERATION SPARE PARTS

Not Applicable

5.0TRAINING

The supplier will be required to provide training for COMPANY personnel for flexible flowlines and risers Integrity Management and Inspection including training course manuals and materials. The venue in Malaysia will be provided by COMPANY.

Supplier shall quote the rate per session assuming 5days per session is required.

6.0SERVICE RATES

SUPPLIER's service rates shall be as quoted in the Schedule of Service Rates and in accordance with the following conditions. Supplier to note that the rates shall include the necessary repair kits required offshore in case of any damage to the outer sheath during installation activities.

6.1Mobilisation and Demobilisation Cost

COMPANY shall compensate SUPPLIER the lump sum costs for Mobilisation and Demobilisation for each personnel furnished in accordance with the requirements. Tentatively two mobilization/demobilization will be required, and bidder is required to quote for lump sum per mobilization/demobilization
The lump sum Mobilisation and Demobilisation costs shall be all-inclusive including but not limited to airfare, transportation, accommodation, meals, salaries, insurances, all foreign and local taxes and duties, travel expenses, traveling time rate, administration expenses and other costs associated with Mobilisation and Demobilisation of SUPPLIER's Service Personnel from point of origin to work site.

6.2Daily Service Rate

Daily rates shall commence when the SUPPLIER's Service Personnel physically reports to the respective COMPANY’s Site Representative at designated work site and cease upon the personnel completing the agreed assignment at the same work site.
Daily rates shall be all-inclusive including but not limited to base salaries, burdens, overhead, profit, all taxes, special tools and kits, documentation and reports that COPMANY may require.
Daily rates shall be on 8 hours per day at onshore work location and twelve (12) hours for offshore work location (exclusive lunch break). Overtime must be authorised and approved by COMPANY’s Site Representative prior to commencement of such work.

6.3Standby Rates

Standby rates shall only be applicable for cases where SUPPLIER's service personnel is required by COMPANY to be on standby at the work site. The standby rate shall be as quoted in the Schedule of Service Rates table.

6.4Validity of Rates

The rates provided in the Schedule of Service Rates shall be valid for at least three (3) years from the bid closing date of the bidding exercise.

7RETENTION FOR FINAL VENDOR DATA AND FINAL ACCEPTANCE AT COMPANY'S SITE

COMPANY will exercise 5% retention for final vendor data submission.

8SCHEDULE OF PRICES AND RATES

8.1COMPANY shall compensate SUPPLIER based on the following table:-

Exhibit III – Schedule of Prices & Rates

Page 1 of 10

TENDER NO : PML/C304/P2-117

SUPPLY OF IN-FIELD STATIC PRODUCTION FLOWLINES AND DYNAMIC RISER ASSEMBLIES CENDOR PHASE 2 DEVELOPMENT PROJECT (PM 304))

PRICES FOR GOODS – LUMP SUM PRICE BASED ON F.O.B. /D.D.U. BASIS as specified in Exhibit II inclusive of the following:

All components and ancillaries required to complete the scopefor:

-Static flexible flowlines

-Dynamic flexible risers

-Mid-Water Arches

-PLETs

-Pulling heads and handling ancillaries

-Installation ancillaries

Note 1 : Bidder shall provide as an attachment, detailedEquipment List and Bill of Material for cost element item 4b and

4c in Table 1.

2 : For cost element 2,3,5 and 6, bidder shall provide detailed Equipment List and Bill of Material for components

2 monthsoffree reels starting from the FOBPort of Export
QA / QC related activities including verification / certification
Independent Design Integrity Assurance review by 3rd party
Surface and Preparation Painting
Documentation & Drawing ( as per VDRL)
Packing Cost including containerisation for sea transport

No. / Cost Element / Quantity / Lump Sum Breakdown Cost
(BIDDER TO SPECIFY CURRENCY)
1 / Project Management and Engineering / Lump Sum
2 / Static Production Flowlines:
a) 12” CDW-B to CDP-A / 1,728 m
b) 12” CDW-B to CDP-A / 1,727 m
c) 12” CDW-C to CDP-A / 3,476 m
d) 12” CDW-C to CDP-A / 3,489 m
3 / Dynamic Risers:
a) 12” x 245m CDW-B Production Risers / 2 nos
b) 8” x 245m CDW-B Water Injection Riser / 1 no
c) 8” x 245m CDW-B Gaslift/Gas Injection Riser / 1 no
d) 12” x 245m CDW-C Production Risers / 2nos
e) 8” x 245m CDW-C Water Injection Riser / 1 no
f) 8” x 245m CDW-C Gaslift / Gas Injection Riser / 1 no
4a / Additional End Connectors
Dynamic Risers
a)2 x 8” WI
b)2 x 8” GL/GI
c)2 x 12” FWS
Static Flowlines
a) 2 x 12” FWS / Lump Sum
4b / Installation Spares as per bidder recommendations / Lump Sum
4c / Installation Ancillaries as per bidder recommendations / Lump Sum
5 / Mid Water Arch Assemblies and accessories ex-works Quay Side in Peninsular Malaysia / 2 units
6 / Pipeline End Termination (PLETs)ex-works Quay Side in Peninsular Malaysia / 2 units
7 / 3rd Party Design Integrity Assurance / Lump sum
8 / FPSO Mating Flanges (4nos x 12” Duplex SS and 4nos x 8” CS)[Optional] / 8 nos
9 / Riser Integrity Vacuum Test Kit [Optional] / 1 no
TOTAL RAW BID PRICE - F.O.BPort of Export
TransportationFOBPort of Export to DDU nominated supply base

OFFSHORE INSTALLATION SUPPORT SERVICES

The supplier will be required to provide offshore installation support services(personnel and repair kits) to the offshore installation contractor.

The nominated offshore engineer / technician is required to witness the installation activities to ensure compliance to the installation procedures/manual and when necessary, repair the outer sheath in case of damage during installation.

Cost for Technical Services for Installation, Pre-Commissioning, Commissioning and Start-Up
TECHNICAL SERVICES / DURING / UNIT / RATE
(Bidder to specify currency) / ESTIMATED
QTY / TOTAL
(RM)
(Bidder to specify currency)
Technician / Mobilization & Demobilization Fee / Person / 2
Standby (onshore – 8 hours) / Day / 7
Commissioning /Start-up (offshore - 12 hours) / Day / 60
Repair Kits / Mobilization & Demobilization Fee / Lot / 1
Commissioning /Start-up Day Rate / Lot / 1
Replacement / Lot / 1
COST OF TECHNICAL SERVICES FOR INSTALLATION, PRE-COMMISSIONING, COMMISSIONING AND START- UP

Table 2 : Offshore Installation Support Services Rates

Notes 1. The quantities are for estimation purposes only. COMPANY may vary the duration to suit their installation planning requirement

2 Bidder shall propose other additional services related to the above activities and their rates as an option for COMPANY review and evaluation.

3 Bidder to provide the detail list of the repair kits proposed for the scope for COMPANY information.

TRAINING FOR FLEXIBLE FLOWLINES AND RISERS INTEGRITY MANAGEMENT AND INSPECTION

DESCRIPTION / TRAINING RATES / SESSION
(RM) / TOTAL
(RM)
1 / Rates for training including mob/demob based on Classroom Training to be held at a training center nominated and paid by COMPANY within Malaysia. Training is for 5days per session with 5 attendees

Table 3 : Training

REELS RENTAL

The lump sum price in Table 1 shall include the rental reels for 2months starting from FOB at Port of Export.

In the event COMPANY requested additional reel rental duration beyond 2 months as specified in Scope of Supply, the following rates shall apply.

No / Descriptions / Day Rate (61-91days)
(SUPPLIER TO SPECIFY CURRENCY) / Day Rate (91++ days)
(SUPPLIER TO SPECIFY CURRENCY)
1 / Hire / Reel up to xxxx(bidder to specify the dimension and weight)
2 / Lift Rigging for the specified reels

Table 4: Reels Rental

PRESERVATION AND STORAGE

In the event COMPANY requested for the flexibles to bepreserved and stored at SUPPLIER yard, the following rates shall apply.

No / Descriptions / Day Rate (1-30days)
(SUPPLIER TO SPECIFY CURRENCY) / Day Rate (30++ days)
(SUPPLIER TO SPECIFY CURRENCY)
1 / Preservation and Storage / Reel specified for the project

Table 5 : Preservation and Storage

F. PRICES FOR ADDITIONAL/REDUCTION IN LENGTH

1.The following unit rates will be used to calculate price variations for changes in pipe lengthduring detailed design / pre design freeze.

Item / Flexible Pipe Description / Increase in Length
(per metre)
(Please specify currency) / Decrease in Length
(per metre)
(Please specify currency) / Remarks
(Please specify if there is any conditions attached the increase/decrease length unit price)
1 / 12” Production Flowlines
2 / 12” Production Riser
3 / 8” Water Injection Riser
4 / 8” Gaslift / Gas Injection Riser

Table 6a : Unit Rates for Incremental/Reduction in length

2.The following unit rates will be used to calculate price variations for changes in pipe lengthpost design freeze / prior to raw materials procurement.

Table 6b : Unit Rates for Incremental/Reduction in length

3.The following unit rates will be used to calculate price variations for changes in pipe lengthpost raw materials procurement / prior to manufacturing commencement

Table 6c : Unit Rates for Incremental/Reduction in length

H.OTHER COMMERCIAL INFORMATION

NO. / DESCRIPTION / BIDDER’S RESPONSE
13 / OTHER INFORMATION

TERM OF PAYMENT

VALIDITY OF QUOTATION FOR THE GOODS – 120 DAYS FROM BID CLOSING DATE

COUNTRY OF ORIGIN OF GOODS/ MANUFACTURING LOCATION

/ ______(Bidder to state compliance)
______(Bidder to specify)
______(Bidder to specify
origin of equipment)

Exhibit III – Schedule of Prices & Rates

Page 1 of 10