ROCZNIKI INŻYNIERII BUDOWLANEJ – ZESZYT 15/2015
Komisja Inżynierii Budowlanej Oddział Polskiej Akademii Nauk w Katowicach
(4 empty 10-pt. lines with single spacing )
INSTRUCTION FOR AUTHORS PUBLISHING
IN „ANNUALS OF CIVIL ENGINEERING”
(2blank 10-pt. lines with single spacing)
Forename SURNAME
Institution, City, Country
(2blank 10-pt. lines with single spacing)
Keywords:keyword, keyword, keyword.
(1 blank 10-pt. line with single spacing)
1. General information
(1 blank 10-pt. line with single spacing)
The purpose of the journal is to present problems of civil engineering.We want to publish articles written not only by Polish scientists, but also by researchers from other countries, especially from Central Europe.Only original, scientific, relating to the scientific issues of civil engineering and never before publishedworks can be submitted for assessment to the Editorial Board. The procedures of publishing process for the submitted articles are described in detail on the journal’s website
The articles should be written in Polish, Czech, Slovak or English and contain an even number of pages. The size of article, preferred by the Editorial Board, should not exceed 8 pages including the title, formulas, tables, figures, bibliography and summary in English. The summary should contain about 10 lines.
Text of the article should be typed using a computer word processing program Microsoft Word (as a doc file) and mathematical patterns using the equation editor included in the program Microsoft Word (page format A4 (210mm x 297mm); margins: top – 49mm, bottom – 48mm, left – 40mm, right – 40mm; 15mm-header; 12mm-footer). Times New Roman 10-pt. font should be used with single spacing. The paper should be sent via e-mail to the two versions: a doc and pdf format.
(1 blank 10-pt. line with single spacing)
2. Article title
(1 blank10 pt. line with single spacing)
Before an article title 4 blank 10-pt. lines should be insertedwith single spacing. The title should be center-aligned,typed using capitals and bold Times New Roman 13-pt. font.
(1 blank10 pt. line with single spacing)
3. Name and affiliation of the author
(1 blank 10 pt. line with single spacing)
Below the title 2 blank 10-pt. lines should be inserted. After them center-aligned forename and surname of the author (authors) should be put and in the next line the institution, city and country according to the affiliation of the author (authors). This data should be typed using 10-pt. font with single spacing and the surname (surnames) in capitals.
(1 blank 10 pt. line with single spacing)
4. Keywords
(1 blank 10 pt. line with single spacing)
After the authors data and 2 blank 10-pt. line left keywords should be put and typed in italics using Times New Roman 10-pt. font with single spacing. The list of keywords should be preceded by the bolded inscription „Keywords”and colon.
(1 blank 10 pt. line with single spacing)
5. Chapter titles
(1 blank 10-pt. line with single spacing)
Chapter titles should be numbered in consecutive Arabic numerals, typed using bold Times New Roman 11-pt. font and center-aligned. Above and below the chapter titles 1blank 10-pt. line should be left.
(1 blank 10-pt. line with single spacing)
6. Text
(1 blank 10-pt. line with single spacing)
Text should be typed using Times New Roman 10-pt. font with single spacing. An indention of the first paragraph line should be 5mm.
(1 blank 10-pt. line with single spacing)
7. Mathematical formulas and denotations of symbols
(1 blank 10 pt. line with single spacing)
Mathematical formulas should be center-aligned, typed using Times New Roman 10-pt. font and the Microsoft Word equation editor. Above and below the formulas1 blank 10-pt. line should be inserted.The formulas are numbered in consecutive Arabic numeralsput in parentheses on the right side of page. A list of the most important denotations of symbols used in the work should be placed before the bibliographywith their explanations in the national language and English. Use only SI units in the list. In the case of articles written entirely in English the list of denotations should be explained only in English.
(1 blank 10-pt. line with single spacing)
(1)
(1 blank 10-pt. line with single spacing)
text text text text text text text text text text text text text text text
(1 blank 10-pt. line with single spacing)
8. Tables
(1 blank 10-pt. line with single spacing)
Tables should be center-aligned and if possible placed close to the text which they refer to. The tables should be described only in the language used in the article, typed using Times New Roman 10-pt. font, numbered in consecutive Arabic numeralsand be separated from the rest of text by single blank 10-pt. lines with single spacing.
(1 blank 10-pt. line with single spacing)
Tabe 1. Values of the determined parameters.
(1 blank 10-pt. line with single spacing)
text text text text text text text text text text text text text text text
(1 blank 10-pt. line with single spacing)
9. Figures
(1 blank 10-pt. line with single spacing)
Figures should be center-aligned and if possible placed close to the text which they refer to and be separated from the rest of text by single blank 10-pt. lines with single spacing. Their description should be placed below the figure,numbered in consecutive Arabic numeralsand next explained using Times New Roman 10-pt. font. The first description should be written in the same language which is used in the article and the second one in English. If the article is written entirely in English put the explanation of figure only in English. The figures should be black-and-white, contrastive and of good quality (scanned figures are unacceptable).
(1 blank 10-pt. line with single spacing)
(1 blank 10-pt. line with single spacing)
Rys. 1. Zmiany wytrzymałości materiału w czasie.
Fig. 1. Time-changes of material strength.
(1 blank 10-pt. line with single spacing)
text text text text text text text text text text text text text text text
(1 blank 10-pt. line with single spacing)
10. Bibliography
(1 blank 10-pt. line with single spacing)
A list of literature only cited in the work should be placed at the end of the article, but before the summary. The list should be arranged alphabetically. When referring to literature in the text give the item number of cited publication in square brackets.
(1 blank 10-pt. line with single spacing)
Denotations of symbols
(1 blank 10-pt. line with single spacing)
- gęstość masy, mass density, [kg/m3],
- gęstość masy składnika 1, mass density of constituent 1, [kg/m3],
- gęstość masy składnika 2, mass density of constituent 2, [kg/m3].
(1 blank 10 pt. line with single spacing)
Bibliography
(1 blank 10-pt. line with single spacing)
[1] Bairrao R., Chrzanowski M., Latus P., Olivera S.: Evaluation of failure Caused by Damage Accumulation in RC Beams under Variable Loading, Proc. of 4th Int. Symposium on Creep and Coupled Processes, ed.: A. Jakowluk, Z. Mróz, Białystok-Białowieża, 1998.
[2] Boehler J. P.: Applications of tensor functions in solid mechanics, Springer-Verlag, Vienna, 1987.
[3] Xia-Ting F., Sili C., Shaojun L.: Effects of Water Chemistry on Microcracking and Compressive Strength of Granite, International Journal of Rock Mechanics and Mining Sciences, 38, 2001, p. 557-568.
(1 blank 10-pt. line with single spacing)
ENGLISH TITLE
(ONLY IF THE ARTICLE IS NOT IN ENGLISH)
(1 blank 10-pt. line with single spacing)
Summary
(1 blank 10-pt. line with single spacing)
At the end of the article put the article title in English typed in capitals using bold 11-pt. Times New Roman font (in the articles written entirely in English only its English summary should be put). Next, after 1 blank 10-pt. line left bolded word „Summary” should be placed and center-aligned and after next 1 blank 10-pt. line left put the text of article summary. The word „Summary” and its text should be typed using 10-pt. Times New Romanfont. If possible, the entire summary should contain about 10 lines.