INTEX INDUSTRIES (XIAMEN) CO.,LTD
Declaration of Composition
Acc. to Directive 2011/65/EC (WEEE)
We, manufacturer / exporter,
Intex Industries(Xiamen) co.,Ltd
(Manufacturer/supplier name)
Xinyang Industrial Zone,Haicang,Xiamen,Fujian,P.R.C. 361022
(Company address)
Declare that the following designated product:
AIR PUMP 58609/68609
Is manufactured from the materials described in the attached table:
See page2
Authorized person signing for the company:
INTEX INDUSTRIES (XIAMEN) CO.,LTD
MAR，12, 2012
Annex 1: DETAILED COMPOSITION
1/ Localization of the pollutants
Item nr / Description / Components designation / weight(g) / Part nr / Remarks1 / LOW-PRESSURE MOTOR / 162.5 / 5
2 / HIG-PRESSURE MOTOR / 152.5 / 15
3 / AC POWER CORD / HO5RN-F 3G80.75 / 225.5 / 39
4 / CONNECT WIRE / 18AWG / 4.65 / 40
5 / DC OUTLET / 5.42 / 46
6 / DC POWER CORD / 105.5 / 47
7 / SWITCH / KCD1-103 / 4.25 / 48
8 / TRANSFORMER / T-1066B / 1443 / 49
9 / EPOXY / 9100A/9100B / 50
10 / TRANSFORMER HOUSING / ABS PA765A / 72 / 51
2/ Recycling
PLASTIC MATERIALSItem nr / Description / Detailed composition / weight(g) / Part nr
1 / ABOVE BODY / ABSKJB1000 / 206 / 1
2 / UNDER BODY / ABSKJB1000 / 261 / 2
3 / FOOT PAD / EVA / 0.6 / 4
4 / VANE-A / ABS 777B / 10 / 7
5 / VANE-B / ABS 777B / 10.2 / 8
6 / HOUSING COVER / ABS 5000 / 38.4 / 11
7 / BLADE HOUSING / ABS 5000 / 17.8 / 12
8 / MOTOR BRACKETS / ABS 777B / 3.9 / 13
9 / SLAVE GEAR / NL6212G3 / 15.4 / 18
10 / GEAR BOX / PBT1403G3 / 19.674 / 20
11 / PISTON SHAFT / NL6212G3 / 10.1 / 22
12 / DIAPHRAGM / RUBBER / 6.8 / 24
13 / PISTON / ABS 5000 / 0.24 / 25
14 / INTAKE VALVE SEAL / NL6212G3 / 0.24 / 26
15 / REAR COVER / ABS 5000 / 10 / 28
16 / FRONT COVER / ABS 5000 / 27.5 / 29
17 / HIG-PRESSURE COVER / ABS 5000 / 38.4 / 32
18 / VALVE / LDPEF811 / 0.13 / 33
19 / VALVE / PP3080 / 0.13 / 34
20 / EXHAUST VALVE SEAL / ABS 5000 / 0.35 / 35
21 / ADIABATIC BOARD / PBT 1403G3 / 19.674 / 36
22 / NOZZLES / PP3080 / 15.4 / 57
23 / CONNECTOR / PP3080 / 100.5 / 60
24 / AIRHOSE / PVC / 9.7 / 61
METAL MATERIALS
Item nr / Description / Detailed composition / weight(g) / Part nr
1 / SCREW / STEEL+ZINC / 1.15 / 3
2 / SHAFT / CU / 7.16 / 6
3 / WASHER / STEEL+ZINC / 0.21 / 9
4 / NUT / STEEL+ZINC / 1 / 10
5 / SCREW / STEEL+ZINC / 0.75 / 14
6 / MOTOR BRACKETS / STEEL+ZINC / 3.3 / 16
7 / DRIVE GERA / CU / 2.48 / 17
8 / GEAR SHAFT / S45C / 4.2 / 19
9 / E-LOCK / STEEL / 0.11 / 21
10 / SHAFT BUSHING / 1.025 / 23
11 / SCREW / STEEL+ZINC / 0.42 / 27
12 / SCREW / STEEL+ZINC / 0.75 / 31
13 / ECCENTRICITY SHAFT / S45C / 2.1 / 37
14 / SCREW / STEEL+ZINC / 0.5 / 45
15 / SCREW / STEEL+ZINC / 1.08 / 52
16 / SCREW / STEEL+ZINC / 1.36 / 53
17 / PC BOARD / 34.1 / 54
18 / AIR PIN / STEEL+ZINC / 2.1 / 58
19 / INSERT / CU / 2 / 59
pollutants weight / 2175.32 g
Plastic Metal weight / 887.93 g
Total weight / 3063.253 g
Each component must be identified by the part number indicated on the exploded view (annex 2)
Annex 2: Exploded view
Annex 3: Scope
· Large household appliances
· Small household appliances
· IT and telecommunication equipment
· Consumer equipment
· Lighting equipment (Expect filament light bulbs & household luminaries)
· Electrical and electronic tools
· Toys
· Medical equipment systems
· Monitoring and control instruments
· Automatic dispensers
Annex 4: Mandatory markings
According to the WEEE Directive 2002/96/EC, a legible, durable and indelible marking must be added on the EEE:
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.
Technical data :