standards
List of ASEAN Standards approved / withdrawn / amended in 2002
1
ASEAN STANDARDS AND QUALITY
standards
MALAYSIASTANDARDS APPROVED
MS 1531:2002
Methods of test for honey
MS 1044:Part 4:2002
Specification for mosquito vapourising mat : Part 4 : Method for the evaluation of biological efficacy - Peet Grady method
MS 81:Part 14:2002
Method of sampling and test for spices and condiments : Part 14 : Determination of lead
MS ISO 3084:2002
Iron Ores – Experimental methods for evaluation of quality variation
MS 133:Part E8:2002
Methods of test for paints and varnishes : Part E8 : Resistance to impact (Pendulum test)
MS ISO 105-X06:2002
Textiles – Tests for colour fastness – Part X06: Colour fastness to soda boiling
(Supersedes MS 308 : Part 11 : 1975)
MS ISO 3688:2002
Pulps – Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO Brightness)
MS ISO 105-X05:2002
Textiles – Tests for colour fastness – Part X05: Colour fastness to organic solvents
(Supersedes MS 308 : Part 17 : 1975)
MS ISO 2469:2002
Paper, board and pulps – Measurement of diffuse blue reflectance factor
MS 308 : Part N01:2002
Textiles – Tests for colour fastness – Part N0 1: Colour fastness to bleaching: Hypochlorite
(Supersedes MS 308 : Part 20 : 1975)
MS ISO 4701:2002
Iron Ores – Determination of size distribution by sieving
MS ISO 105-N03:2002
Textiles – Tests for colour fastness – Part N0 3: Colour fastness to bleaching : Sodium chlorite (mild)
(Supersedes MS 308 : Part 21 : 1977)
MS ISO 3852:2002
Iron Ores – Determination of bulk density
MS ISO 105-N04:2002
Textiles – Tests for colour fastness – Part N04: Colour fastness to bleaching : Sodium chlorite (severe)
(Supersedes MS 308 : Part 22 : 1977)
MS ISO 105-X09:2002
Textiles – Tests for colour fastness – Part X09: Colour fastness to formaldehyde
(Supersedes MS 308 : Part 24 : 1977)
MS ISO 105-P01:2002
Textiles – Tests for colour fastness – Part P01: Colour fastness to dry heat (excluding pressing)
(Supersedes MS 308 : Part 23 : 1980)
MS ISO 3087:2002
Iron Ores – Determination of the moisture content of a lot
MS ISO 3082:2002
Iron Ores – Sampling and sample preparation procedures
MS ISO 105-S03:2002
Textiles – Tests for colour fastness – Part S03: Colour fastness to vulcanisation : Open steam
(Supersedes MS 308 : Part 25 : 1980)
MS ISO 105-E14:2002
Textiles – Tests for colour fastness – Part E14: Colour fastness to acid-felting : Mild
(Supersedes MS 308 : Part 34 : 1980)
MS ISO 105-X14:2002
Textiles – Tests for colour fastness – Part X14: Colour fastness to acid chlorination of wool : Sodium dichloroisocyanurate
(Supersedes MS 308 : Part 26 : 1977)
MS ISO 105-E11:2002
Textiles – Tests for colour fastness – Part E11: Colour fastness to steaming (Supersedes MS 308 : Part 35 : 1980)
MS ISO 105-X04:2002
Textiles – Tests for colour fastness – Part X04: Colour fastness to mercerizing
(Supersedes MS 308 : Part 27 : 1980)
MS ISO 105-S01:2002
Textiles – Tests for colour fastness – Part S01: Colour fastness to vulcanization : Hot air
(Supersedes MS 308 : Part 36 : 1980)
MS ISO 105-N05:2002
Textiles – Tests for colour fastness – Part N05: Colour fastness to stoving
(Supersedes MS 308 : Part 28 : 1977)
MS ISO 105-S02:2002
Textiles – Tests for colour fastness – Part S02: Colour fastness to vulcanization: Sulfur monochloride
(Supersedes MS 308 : Part 37 : 1980)
MS ISO 105-E02:2002
Textiles – Tests for colour fastness – Part E02: Colour fastness to sea water
(Supersedes MS 308 : Part 29 : 1977)
MS ISO 105-D01:2002
Textiles – Tests for colour fastness – Part D01: Colour fastness to dry cleaning
(SupersedesMS308:Part38 : 1980)
MS ISO 105-E07:2002
Textiles – Tests for colour fastness – Part E07: Colour fastness to spotting : Water
(Supersedes MS 308 : Part 30 : 1977)
MS ISO 105-X10:2002
Textiles – Tests for colour fastness – Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
(Supersedes MS 308 : Part 39 : 1980)
MS ISO 105-N02:2002
Textiles – Tests for colour fastness – Part N02: Colour fastness to bleaching : Peroxide
(Supersedes MS 308 : Part 31 : 1980)
MS ISO 105-B05:2002
Textiles – Tests for colour fastness – Part B05: Detection and assessment of photochromism
(Supersedes MS 308 : Part 40 : 1980)
MS ISO 105-E12:2002
Textiles – Tests for colour fastness – Part E12: Colour fastness to milling : Alkaline milling
(Supersedes MS 308 : Part 32 : 1980)
MS ISO 105-B03:2002
Textiles – Tests for colour fastness – Part B03: Colour fastness to weathering : Outdoor exposure
(SupersedesMS308:Part41 : 1980)
MS ISO 105-E13:2002
Textiles – Tests for colour fastness – Part E13: Colour fastness to acid-felting : Severe
(Supersedes MS 308 : Part 33 : 1980)
MS ISO 105-B04:2002
Textiles – Tests for colour fastness – Part B04: Colour fastness to artificial weathering : Xenon arc fading lamp test
(SupersedesMS308:Part42 : 1980)
MS ISO 105-P02:2002
Textiles – Tests for colour fastness – Part P02: Colour fastness to pleating - Steam pleating
(SupersedesMS308:Part43 : 1980)
MS ISO 10545-16:2002
Ceramic tiles - Part 16: Determination of small colour differences
MS 133 : Part E14:2002
Methods of test for paints and varnishes : Part E14 : Determination of resistance to abrasion (Rotating abrasive-paper-covered wheel)
MS ISO 10545-5:2002
Ceramic tiles - Part 5: Determination of impact resistance by measurement of coefficient of restitution
MS 133 : Part E15:2002
Methods of test for paints and varnishes : Part E15 : Determination of resistance to abrasion (Rotating abrasive rubber wheel)
MS ISO 10545-1:2002
Ceramic tiles - Part 1: Sampling and basis for acceptance
(Supersedes MS 1090 : 1987)
MS 133 : Part E16:2002
Methods of test for paints and varnishes : Part E16 : Determination of resistance to abrasion (Reciprocating test panel)
MS ISO 10545-2:2002
Ceramic tiles - Part 2: Determination of dimensions and surface quality
(SupersedesMS1091 : Part 1 : 1987)
MS 133 : Part E17:2002
Methods of test for paints and varnishes : Part E17 : Determination of mar resistance using a curved stylus
MS 1533:2002
Recommended practices in monitoring electric power quality
MS 133 : Part E18:2002
Methods of test for paints and varnishes: Part E18 : Determination of mar resistance using a pointed stylus
MS 1534:Part 1:2002
Specification for conduit systems for electrical installations : Part 1 : General requirements
(Supersedes MS 67 : Part 1 : 1972)
MS 133 : Part E19:2002
Methods of test for paints and varnishes: Part E19 : Determination of film hardness by pencil test
MS 1534:Part 2:Section 1:2002
Specification for conduit systems for electrical installations : Part 2 : Particular requirements : Section 1 : Rigid conduit systems
(Supersedes MS 67 : Part 1 : 1972)
MS 1532:2002
Thermal Insulation – Determination of steady-state thermal transmission properties – Calibrated and guarded hot box
MS 1535:Part 1:2002
Domestic gas cooking appliances for use with liquefied gases : Part 1 : Specification
MS ISO 10545-10:2002
Ceramic tiles - Part 10: Determinationof moisture expansion
MS ISO 4306-2:2002
Cranes – Vocabulary – Part 2: Mobile cranes
MS ISO 10545-15:2002
Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles
MS ISO 6892:2002
Metallic material - Tensile testing at ambient temperature
(Supersedes MS 592 : 1979)
MS 1535:Part 2:2002
Domestic gas cooking appliances for use with liquefied gases : Part 2 : General construction
MS ISO/IEC 17799:2002
Information technology – Code of practice for information security management
(Supersedes MS 1511 : Part 1 : 2001 (P))
MS 1535:Part 3:2002
Domestic gas cooking appliances for use with liquefied gases : Part 3 : Test methods
MS 1537:2002
Information security management : Specification for information security management systems
(Supersedes MS 1511 : Part 2 : 2001 (P))
MS 1535:Part 4:2002
Domestic gas cooking appliances for use with liquefied gases : Part 4 : Glossary
MS ISO 19105:2002
Geographic information – Conformance and testing
MS ISO 783:2002
Metallic material - Tensile testing at elevated temperature
MS 1536:Part 4:2002
Information technology – Guidelines for the management of IT security : Part 4 : Selection of safeguards
MS ISO 15579:2002
Metallic material - Tensile testing at low temperature
MS ISO 180:2002
Plastics – Determination of izod impact
(Supersedes MS 1270 : 1992)
MS ISO 2566/1:2002
Steel and steel products - Conversion of elongation values - Part 1: Carbon and low alloy steels
MS ISO 179-1:2002
Plastics – Determination of charpy impact properties – Part 1: Non- instrumented impact test
MS 1536:Part 1:2002
Information technology – Guidelines for the management of IT security :
Part 1 : Concepts and models for IT security
(Supersedes MS ISO/IEC TR 13335-1:2001 (P))
MS ISO 179-2:2002
Plastics – Determination of charpy impact properties – Part 2: Instrumented impact test
MS 1536:Part 2:2002
Information technology – Guidelines for the management of IT security : Part 2 : Managing and planning IT security
(Supersedes MS ISO/IEC TR 13335-2:2001 (P))
MS ISO 294-1:2002
Plastics – Injection moulding of test specimens of thermoplastic materials–Part 1: General principles, and moulding of multipurpose and bar test specimens
(Supersedes MS 1335 : 1993)
MS 1536:Part 3:2002
Information technology – Guidelines for the management of IT security : Part 3 : Techniques for the management of IT security
(Supersedes MS ISO/IEC TR 13335-3:2001 (P))
MS ISO 294-2:2002
Plastics – Injection moulding of test specimens of thermoplastics materials – Part 2: Small tensile bars
MS ISO 294-3:2002
Plastics – Injection moulding of test specimens of thermoplastics materials – Part 3: Small plates
MS ISO 2598-2:2002
Iron ores – Determination of silicon content – Part 2: Reduced molybdosilicate spectrophotometric method
MS 1513:Part 1:Sub-Part 1:2002
Packaging – Transport of dangerous goods : Part 1 : General provisions, definitions and training : Sub-Part 1 : General provisions
MS IEC 61032:2002
Protection of persons and equipment by enclosures – Probes for verification
MS ISO 2234:2002
Packaging – Complete, filled transport packages and unit loads – Stacking tests using a static load
(Supersedes MS 989 : Part 3 : 1985)
MS IEC 60529:2002
Degree of protection provided by enclosures (IP code)
MS ISO 2244:2002
Packaging – Complete, filled transport packages and unit loads – Horizontal impact tests
(Supersedes MS 989 : Part 5 : 1985)
MS IEC 60670:2002
General requirements for enclosures for accessories for household and similar fixed electrical installations
MS 1538:2002
Specification for speed monitoring device for road vehicles
MS IEC 60335-2-10:2002
Safety of household and similar electrical appliances: Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
MS 1539:Part 1:2002
Specification for portable fire extinguishers : Part 1 : Construction and testing methodology
(Supersedes MS 1179 : 1990 and MS 864 : 1983)
MS IEC 60335-2-3: Amendment 2:2002
Safety of household and similar electrical appliances: Part 2-3: Particular requirements for electric irons
MS ISO 10015:2002
Quality management - Guidelines for training
MS IEC 60335-2-3: Amendment 1:2002
Safety of household and similar electrical appliances: Part 2-3: Particular requirements for electric irons
MS ISO 3085:2002
Iron ores – Experimental methods for checking the precision of sampling
MS IEC 60335-2-8:2002
Safety of household and similar electrical appliances: Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
MS ISO 3086:2002
Iron ores – Experimental methods for checking the bias of sampling
MS IEC 60335-2-45:2002
Safety of household and similar electrical appliances: Part 2-45: Particular requirements for portable heating tools and similar appliances
MS ISO 3310-2:2002
Test sieves – Technical requirements and testing – Part 2: Test sieves of perforated metal plate
MS IEC 60335-2-88:2002
Safety of household and similar electrical appliances: Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems
MS ISO 2598-1:2002
Iron ores – Determination of silicon content – Part 1: Gravimetric methods
MS IEC 60335-1: Amendment 2:2002
Safety of household and similar electrical appliances: Part 1: General requirements
MS IEC 60983:2002
Miniature lamps
MS IEC 61000-2-4:2002
Electromagnetic compatibility (EMC) – Part 2: Environment – Section 4: Compatibility levels in industrial plants for low-frequency conducted disturbances
MS IEC 60662:2002
High-pressure sodium vapour lamps
MS IEC 61000-2-9:2002
Electromagnetic Compatibility (EMC) – Part 2: Environment – Section 9: Description of HEMP environment – Radiated disturbance – Basic EMC publication
MS CISPR 14-1:2002
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1 – Emission
MS IEC 61000-2-10:2002
Electromagnetic Compatibility (EMC) - Part 2-10: Environment – Description of HEMP environment – Conducted disturbance
MS CISPR 15: Amendment 2:2002
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
MS IEC 61000-4-1:2002
Electromagnetic Compatibility (EMC) Part 4 : Testing and measurement techniques Section 1: Overview of immunity tests – Basic EMC publication
MS CISPR 16-2:2002
Specification for radio disturbance and immunity measuring apparatus and methods Part 2: Methods of measurement of disturbances and immunity
MS IEC 61000-4-9:2002
Electromagnetic Compatibility (EMC) Part 4: Testing and measurement techniques – Section 9: Pulse magnetic field immunity test Basic EMC publication
MS CISPR 21:2002
Interference to mobile radio communications in the presence of impulsive noise – Methods of judging degradation and measures to improve performance
MS IEC 61000-4-24:2002
Electromagnetic Compatibility (EMC) - Part 4: Testing and measurement techniques – Section 24: Test methods for protective devices for HEMP conducted disturbance Basic EMC publication
MS CISPR 23:2002
Determination of limits for industrial, scientific and, medical equipment
MS IEC 61000-5-5:2002
Electromagnetic Compatibility (EMC) - Part 5: Installation and mitigation guidelines – Section 5: Specification of protective devices for HEMP conducted disturbance – Basic EMC publication
MS CISPR 25:2002
Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
MS IEC 61800-3:2002
Adjustable speed electrical power drive system – Part 3: EMC product standard including specific test methods
MS IEC 61000-2-2:2002
Electromagnetic Compatibility (EMC) Part 2: Environment Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
MS IEC 62040-2:2002
Uninterruptible power systems (UPS) – Part 2 – Electromagnetic compatibility (EMC) requirements
MS IEC 61326-1:2002
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements
MS ISO 5725-3:2002
Accuracy (trueness and precision) of measurement methods and results – Part 3 : Intermediate measures of the precision of a standard measurement method
MS IEC 60601-1-2:2002
Medical electrical equipment
Part 1: General requirements for safety
2. Collateral Standard: Electromagnetic compatibility – Requirements and tests
MS ISO 5725-4:2002
Accuracy (trueness and precision) of measurement methods and results – Part 4 : Basic methods for the determination of the trueness of a standard measurement method
MS 1540:2002
Specification for the material, marking and dimensions of crimp type cable lugs for use with copper conductors in low voltage applications
MS ISO 5725-5:2002
Accuracy (trueness and precision) of measurement methods and results – Part 5 : Alternative methods for the determination of the precision of a standard measurement method
MS IEC 61547:2002
Equipment for general lighting purposes – EMC immunity requirements
MS ISO 5725-6:2002
Accuracy (trueness and precision) of measurement methods and results – Part 6 : Use in practice of accuracy values
MS ISO 10715:2002
Natural gas – Sampling guidelines
MS ISO 2859-4:2002
Sampling procedures for inspection by attributes : Part 4 : Procedures for assessment of stated quality levels
MS ISO 14111:2002
Natural gas – Guidelines to traceability in analysis
MS ISO 11453:2002
Statistical interpretation of data – Tests and confidence intervals relating to proportions
MS ISO 13734:2002
Natural gas – Organic sulfur compounds used as odorants – Requirements and test methods
MS ISO 11843-2:2002
Capability of detection – Part 2: Methodology in the linear calibration case
MS ISO 10723:2002
Natural gas – Performance evaluation for on-line analytical systems
MS ISO 1403:2002
Rubber hoses, textile-reinforced, for general-purpose water application - Specification
MS ISO 5725-1:2002
Accuracy (trueness and precision) of measurement methods and results – Part 1 : General principles and definitions
MS ISO 6804:2002
Rubber hoses and hose assemblies for washing machines and dishwashers - Specification for inlet hoses
MS ISO 5725-2:2002
Accuracy (trueness and precision) of measurement methods and results – Part 2 : Basic method for the determination of repeatability and reproducibility of a standard measurement method
MS ISO 4665:2002
Rubber, vulcanized and thermoplastic – Resistance to weathering
MS ISO 1853:2002
Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement or resistivity
MS ISO 4570-2:2002
Tyre valve threads – Part 2: Threads 9V1, 10V2, 12V1 and 13V1
MS ISO 3384:2002
Rubber, vulcanized or thermoplastic – Determination of stress relaxation in compression at ambient and at elevated temperature
(Supersedes MS 1157 : Part 32 : 1991)
MS ISO 4570-3:2002
Tyre valve threads – Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1
MS ISO 48:2002
Rubber, vulcanized or thermoplastic- Determination of hardness (Hardness between 10 IRHD and 100 IRHD)
(Supersedes MS 1157 : Part A1 : 1995)
MS ISO 6762:2002
Tyre valve – ISO core chamber No. 2
MS ISO 1817:2002
Rubber, vulcanized - Determination of the effect of liquids
(Supersedes MS 1157 : Part 20 : 1991)
MS ISO 9413:2002
Tyre valve – Dimensions and designation
MS ISO 132:2002
Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia)
(Supersedes MS 1157 : Part 10 : 1993)
MS ISO 8330:2002
Rubber and plastic hoses and hose assemblies - Vocabulary
MS 1541:2002
Rubber latex, natural, concentrate - Determination of sludge content
MS ISO 11424:2002
Rubber hoses and tubing for air and vacuum systems for internal - combustion engines - Specification
MS ISO 6502:2002
Rubber – Guide to the use of curemeters
MS 1542:2002
Rubber, raw natural – Determination of dirt content
(Supersedes MS 1359 : Part 3 : 1994)
MS ISO 36:2002
Rubber, vulcanized or thermoplastic – Determination of adhesion to textile fabric
MS ISO 498:2002
Natural rubber latex concentrate preparation of dry films
MS ISO 4000-1:2002
Passenger car tyres and rims – Part 1: Tyres (metric series)
MS ISO 3821:2002
Gas welding equipment – Rubber hoses for welding, cutting and allied processes
MS ISO 4570-1:2002
Tyre valve threads – Part 1: Threads 5V1, 5V2, 6V1 and 8V1
MS 1543:2002
Specification for duck feeds
MS 1544 : Part 1: 2002
Cranes – Safe use : Part 1 : General
MS 1547:2002
Rubber, latex - Determination of density between 5 ºC and 40 ºC
MS ISO 965-1:2002
ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data
(Supersedes MS 220 : 1974)
MS 1548:2002
Rubbers, raw – Determination of volatile-matter content
(Supersedes MS 1359 : Part 2 : 1994)
MS ISO 2566/2: 2002
Steel – Conversion of elongation values – Part 2: Austenitic steels
MS 1549:2002
Test method for determination of residual powder on powder free rubber
medical gloves
MS ISO 377:2002
Steel and steel products – Location and preparation of samples and test pieces for mechanical testing
MS 1550:2002
Test method for determination of residual powder on powdered rubber medical gloves
MS 1513: Part 7:2002
Packaging – Transport of dangerous goods: Part 7: Provisions concerning transport operations
MS ISO 3310-1:2002
Test sieves – Technical requirements and testing – Part 1 : Test sieves of metal wire cloth
MS ISO 779:2002
Paper, board and pulps – Determination of iron
(Supersedes MS 129 : Part 7 : 1973)
MS 1551:2002
Specification for soda ash (sodium carbonate) used for potable water supply
MS ISO 7764:2002
Iron ores – Preparation of predried test samples for chemical analysis
MS ISO 105-F:2002
Textiles – Tests for colour fastness – Part F: Standard adjacent fabrics
MS ISO 9035:2002
Iron ores – Determination of acid-soluble iron (II) content – Titrimetric method
MS ISO 105-F10:2002
Textiles – Tests for colour fastness – Part F10: Specification for adjacent fabrics: Multifibre
MS ISO 2597-1:2002
Iron ores – Determination of total iron content – Part 1 : Titrimetric method after tin (II) chloride reduction
MS ISO 776:2002
Pulps – Determination of acid-insoluble ash
(Supersedes MS 129 : Part 1 : 1973)
MS ISO 8124-3:2002
Safety of toys: Part 3: Migration of certain elements
(Supersedes MS EN 71 : Part 3 : 1998)
MS ISO 638:2002
Pulps – Determination of dry matter content
(Supersedes MS 129 : Part 2 : 1973)
MS ISO 6529:2002
Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases
MS ISO 692:2002
Pulps – Determination of alkali solubility
(Supersedes MS 129 : Part 3 : 1973)
MS ISO 6530:2002
Protective clothing – Protection against liquid chemicals – Determination of resistance of materials to penetration by liquids
MS ISO 699:2002
Pulps – Determination of alkali resistance
(Supersedes MS 129 : Part 4 : 1973)
MS 1552:Part 1:2002
Specification for raised access floor system : Part 1 : General requirements
MS ISO 777:2002
Paper, board and pulps – Determination of calcium
(Supersedes MS 129 : Part 5 : 1973)
MS 1552:Part 2:2002
Specification for raised access floor system : Part 2 : Test methods
MS ISO 778:2002
Paper, board and pulps – Determination of copper
(Supersedes MS 129 : Part 6 : 1973)
MS 1553:2002
Code of practice on wind loading for building structure
MS 1554:Part 1:2002
Cranes – Vocabulary - Part 1: General
MS ISO 15161: 2002
Guidelines on the application of ISO 9001: 2000 for the food and drink industry
MS ISO 261: 2002
ISO general purpose metric screw threads – General plan
MS IEC 60439-2: 2002
Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)