VGA, YPbPr, CVBS Signal Optical Transmission Receiver

TS-9507VR

Description

TS-9507VR is a multimode or single-mode fiber transmission extender which support

component video signal. It will transmit CVBS, YPbPr, VGA video signal and audio signals into

optical fiber signal to transmit. Transmission distance is up to 20 km, and can simultaneously

transmit two-way RS-232, it can be used with single fiber transmission transmitter or matrix

fiber output card.

Features

* Support VGA、YPbPr、CVBS signal output

* Support Bi-directional IR, RS-232 transmission

* Single-mode fiber: 2-20km, 1920x1080p @ 60Hz.

* OM3multimode fiber: Less than 500 meters, 1920x1080p @ 60Hz

Specifications

Model / TS-9507VR
VGA Video
Interface / 15-pinDB female interface
Bandwidth / RGBHV
Signal Type / 0.63Vpp - 0.9Vpp
Gain / <-30dB @ 5MHz
Signal Strength
Impedance / Composite video CV / Component Video YPbPr
Return Loss / CV: 150MHz @ -3dB
Composite Video CV / Component / 0.1 °, 3.58-4.43MHz
Video YPbPr Video Output / 1Vpp: Composite video (CVBS)
Interface / 0.3Vpp: component video PbPr / CbCr
Signal Type / 75 Ω
Gain
Bandwidth / 0
0.01% @ 1 kHz (at rated voltage)
Differential phase error / > 75dB @: 20 Hz ~ 20 kHz
Differential gain error / > 10kΩ (balanced and / or unbalanced connection)
Signal strength / + 19.5dBu, (balanced or unbalanced connection)
15-pinDB female interface
RGBHV
Minimum / Maximum level / 0.63Vpp - 0.9Vpp
Output Impedance / <-30dB @ 5MHz
Return Loss
Audio Signal / Composite video CV / Component Video YPbPr
Interface / CV: 150MHz @ -3dB
Gain / 0.1 °, 3.58-4.43MHz
Frequency response / 1Vpp: Composite video (CVBS)
THD & Noise / 0.3Vpp: component video PbPr / CbCr
S / N) / 75 Ω
CMRR
Signal Type / 0
Input Impedance / 0.01% @ 1 kHz (at rated voltage)
Output / > 75dB @: 20 Hz ~ 20 kHz
Maximum Input level / > 10kΩ (balanced and / or unbalanced connection)
Gain Error / + 19.5dBu, (balanced or unbalanced connection)
RS-232
Serial Port Control Interface / 3bit 3.8 interface
Signal Type / Digital
Level Type / RS-232 level
Signal Direction / Bidirectional communication
Baud Rate / Min: 4800bps Max: 115200bps
Data Bits / 8
Stop Bit / 1
Correction Bit / None
Flow Control / None
Level Delay / 500 ns
Peak Level / +/- 15V
Optical Output Section
Optical Output Port / LC connector
Fiber Type / Multimode / Single Mode (optional)
Wavelength / Multimode 850nm / Single Mode: 1310-1620nm (optional)
Multimode Fiber Standard / 50 / 125μm
Single-mode Fiber Standard / 9 / 125μm
Interface Bandwidth / Forward: 10.2Gbps, the reverse: 3.125Gbps
Bit Clock Jitter / <0.15 Tbit
Bit Rise Time / <0.3Tbit (20% - 80%)
Bit Fall Time / <0.3Tbit (20% - 80%)
Maximum Recommended / OM3 multimode fiber output: less than 500 m, while in
Distance / 1920x1080p @ 60Hz
Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz
Specification
Power Supply / Power adapter, 12VDC / 1.5A
Maximum Power Consumption / 6W
Temperature / Storage& operation temperature: -20 ℃~ + 70 ℃
Humidity / Storage& operation humidity: 10% ~ 90%
Dimensions / 162 (L) X 195 (W) X 35 (H)