DHARMENDRA KUMAR
Contact: +91- 7204521077
E-Mail:
Executive Digest
5+ years of experience in Product design of automotive Interior & Exterior components like Bumper system-Front & Rear both, Lower Grill ,Top Grille, associated brackets with bumper, fog lamp, sensors, Front Door Trim-Outer panel, Inner panel.
Ability to deliver project at system level from concept design to final part.
Major projects delivered
P620C - Front Bumper
Air guider for the Lower grille
B52PH2- Lower Grill w/ Fog lamp model
SK36X- Top grille, radar holder & the Compactor.
· Excellent in man -management and project co-ordination skills.
· Excellent inter personal skills, problem solving skills, and ability to work in multicultural environment.
Core Competencies
Design & Development:
§ Well executioner in design and development of Interior & Exterior trims
§ Good knowledge in automotive plastic parts
§ Review of the project - in terms of timing & deliverable data for all the plastic parts in that project / programmes
§ Fitment and packaging studies (reviews), suggest modifications to the part, understanding manufacturing and assembly process constraints
§ Change management responsibility - right materials, design etc
§ Guiding the CAD design engineers for part modifications
§ Implementation of design documents in all stages of design and development stages, good understanding of vehicle ergonomics and vehicle integration at domain level.
§ Well executioner in plastic part design with through knowledge of various manufacturing process like injection moulding process, Studying DFM.
§ Proficiency in using CAD software like CATIA V5.
Project Co-ordination and Man-management:
Expertise in co-ordination of design activities, co-ordination with other cross functional teams like Supplier, Manufacturing engineering, functional checks for checking ease of assembly as per standard.
Ability to motivate and lead team with objective to achieve deliveries.
Employment Details
1. Hepatica Technologies Pvt.Ltd., Bangalore. ( from Sept'16 till date)
Working for Product Engineering Dept. as Senior Design Engineer
· Design support for a new programme's proto build for Mobius Motors.
· Working on design of Exterior trims and door trims part for SVU model.
· Responsibility : Leading a team of 4 ; Coordinating onsite & offshore; Creation of cad data for
a new programme in Bumper system.
Cad support to the OEM till proto builds.
· CAD software : CATIA V5
· Creating Styling feedback of A-surface based surface quality & moldability; Creating B-surface &
C-surface; Creating Engineering features based on OEM standard, for manufacturability & assembly.
Checking moldability and various part checks as per customer requirement.
Checking & maintaining fit and finish for all the surrounding parts.
2. Idiada Automotive Technology India Pvt.Ltd.,Pune. (May' 2014-Sept'16)
2.1 Working for Exterior Trims Design dept.
A) Front Bumper P620C (Hatchback model)
· Designing the Front Bumper Trim, fog lamp bracket, air guider for lower grille from given A- Class surface from customer (Proton Holdings Berhad, Malaysia).
· Target definition Market / Competitor analysis Design brief
· Benchmarking study
· DCS creation , Concept development ,Final presentation; CAD proposal;
· Preparation of Styling feedback study, Master Section study.
· Packaging A-Solid from rendering received from Studio, Supporting Engineering Division B-Attachments.
· Fitment and packaging studies (reviews), suggest modifications to the part, understanding manufacturing and assembly process constraints.
· Packaging Study, Interference Study with surrounding systems.
· Installation Drawing Creation.
B) Lower Grille for Front bumper exterior (PSA):
· Design, selection & placement of aggregates through geometrical modelling & layout on CAD, Benchmarking studies
· Well versed with implementation of new setups & documentation formalities for work guidelines & facilitating new product development initiatives
· Supplier Coordination Data release & Supplier Interaction
· Design Reviews with other Cross Functional teams to check design feasibility for assembly of proposal before data storage
· Creation of Installation Drawing
3. Duvvada Infosoft Pvt.Ltd., Bangalore( From May'13 to April'14)as an CAD Engineer
· Worked on Rear bumper system,
· Conceptual development of the parts and the supporting brackets for it.
· Feasibility in manufacturing, servicing, check the Interferences with other parts. Interaction with other design teams to resolve the issues, preparing presentations for the issues observed.
Responsibilities
· Responsible for System level design of Exterior & Interior trims
· New ideas & cost reduction proposals
· Active involvements in preparing Quality Check sheets.
· Feasibility of interior & benchmarking with competitors vehicle.
· Section creation, Engineering of complete data (Draft analysis, Surface modification, fixation layout, Styling Feedback study, Surface Quality Check, Fit and Finish study).
· Coordinator between styling team, exterior team & manufacturing engineering team.
· Development of master sections for creation of technical surface (B-surface). Deciding the fixation scheme layout Stiffeners, CAD modelling for creating B-Surface.
4. Bhagyajyoti Engineering,Pune( From Sept'10 to Mar'13)as a Product design & development Engineer
· Conceptual development of the parts and the supporting brackets for it.
· Feasibility in manufacturing, servicing, check the Interferences with other parts. Interaction with other design teams to resolve the issues, preparing presentations for the issues observed.
Responsibilities
· New ideas & cost reduction proposals
· Active involvements in preparing Quality Check sheets.
· Section creation, Engineering of complete data (Draft analysis, Surface modification, fixation layout, Styling Feedback study, Surface Quality Check, Fit and Finish study).
Education
Examination / University/Board- College / Year / Percentage /B.Tech.
(Mechanical) / Visvesvaraya Technological University
(Rural Engineering College) / 2010 / 62.0%
H.S.C / C.B.S.E (Navyug Vidhayalaya, Bhagalpur) / 2005 / 60.0%
S.S.C / I.C.S.E (Saint Joseph's School) / 2003 / 72.0%
Training Programs
Course Completed / Institute / Duration / YearCertified CAD Engineer Course in CATIA V5 R15 + PROJECTS / CADCAMGURU Solutions, PUNE / 250 hrs / 2011
Software Skills
Software / Competency / Level Of SkillCATIA V5 / GSD,Wireframe & Surface Design,Assembly Design, Sketcher / Proficiency level knowledge in surfacing as well as part modeling
UG Nx 7.5 / Part Modeling, Assembly, Surfacing, Drafting / Proper understanding
of part modeling & Surfacing
Strengths
· Good Communication and interpersonal skills and ability to work in a team as well as individually.
· Adaptability and flexibility: I am open to new ideas and concepts. Also like to work independently or as part of a team.
· Find no problem in changing gears when required, whether multitasking or adapting working hours and locale.
· Professionalism and work ethic: I believe to work with positive work ethics & stick with challenges until I meet them.
· Positive attitude and energy: I believe to have a positive outlook and energetic, organized behaviour.
· Computer skills, well aware of Windows OS and Microsoft Office.
· Energized by challenges and problems.
· Drafting and documentation.
· Never give upon problems and situations.
Hobbies
· Drawing, and Singing.
· Playing Carrom & Cricket
· Outing with friends & family
Personal Details
Passport No. : - H5356312
Present Address : - Flat no.501,Software Icon -2
1st Cross road, Vaikuntam Layout,
Kundalahalli, Bangalore - 57
Date of birth : - 12th Jan 1987
Nationality : - Indian
Languages known : - Hindi, English, Japanese (Pursuing N5-level)