（150-5050 Street Light Module）
Feature
■ High energy saving: 120-180lm/w,which is 50% higher than ordinary metal halide lamp,and the same lamp is about 80% energy saving.
■Eco-friendly:no lead,mercury and other substances to make bad effect on the environment.And no UV, IR and other harmful substances to human health.Compared with commonmetal halide lamp,it has no glare and without light pollution to surroundings.
■ Long lifespan：5-8 times lifespan than the ordinary lamp, save maintenance cost.
■ Super thermal Dissipation：Great heat sink made of aluminum alloy with high thermalconductivity, significantly reduce the temperature rise, junction temperature rise will be less than 10 degree, effectively extending the lamp life.
■ Great reliability：No start-up delay，constant current drive，not affected by power fluctuations,no flicker.
■ Easy assembly and disassemble:Just install the lamp body to its place with screws, and loosen the screws when repair.
■ High security:external voltage of module is safe,which will prevent leakage and electric shock efficiently.
■ Zero air gap technology :light lens and sources all adopt zero air gap technology based on self-adaptive colloidal ,achieves zero light loss.
■Perfect Light Distribution Solution：Adoption of integrated peanut shell optic lens, meet the photometric requirements of road lighting design standards，enhance the brightness , illumination uniformity and geometric utilization.
■ Pluggable design of module can make us easier to install and repair.Spares is the least, it is convenient for us to stocking.
■ When installed in the street,there are vents between modules to facilitate thermaldissipation by air convection and automaticcleaning of light.
■ Green products which meet RoHS.
■ LEDs which packaged by mul-chips is high lumen, stable performance, low light failure and no dead lights.
Application
■ This product mainly applies to highway,urban roads and secondary roads,stadium,sidewalk, residential area,industry sites, square area,park ,school ,villa and courtyard,etc.street lighting.
Technical parameter
No. / Name / Nominal Value
1 / Model / LY-MSL5030-N1B0F2
2 / Power / 50W
3 / Input Voltage / 44.35V
4 / Input Current / 1.1A
5 / CCT / 4000K
6 / CRI / ＞70
7 / Luminous Efficiency / 170.87Lm/W
8 / Luminous Flux / 8335lm
9 / Beam Angle / 150*70°
10 / Brand of Chips / Sanan(22*35mil)
11 / LED Qty. / 30pcs
12 / Lens Arrangement / 8778
13 / IP Rate / IP66
14 / Working Environment / -40℃~50℃，20%~90% H.R
15 / Storage Temperature / -40℃~85℃10%~90% H.R.
16 / Life time / 50000H
17 / Body material / Aluminum and optical PC
18 / Size of Lamp / 172*150*42mm / ±5mm
19 / Package Size (2pcs) / 172*150*49mm / ±5mm
20 / Carton (40pcs) / 550*400*180mm / ±5mm
21 / N.W. (/pcs) / 0.66kg / ±0.1kg
Planar illuminanceDistribution Curve
/
Dimension
Precautions
Please read the following precautions carefully before you use the product.This will guide you how to use it .
1.Warranty：5 years
2.Please Check the product and handle the product with care when open the package.
3.If the new product is found damaged, please keep the original package and contact us.
4.Please do not try to use the damaged Product.
5. In order to ensure the product work properly, please use the power supply within indicating voltage
Range.
6.Please follow the installation instructions to install the product. Please do not touch the light while it is working.
7.Whatever the case, lamps can not be covered by heat resistant gasket or similar materials.
8.Please turn off the power supply for the base to avoid electric shock while installing and uninstalling the product.
- Do not look directly to LED light source for a long time, because the high-intensity light source
10.The luminaries must be installed and repaired by a qualified electrician.
Date: November/2017 Page: 1/ 3 2017