SECTION 11 19 00
DETENTION FURNITURE
Display hidden notes to specifier. (Don't know how? Click Here)
Copyright 2014 - 2015 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** PSI LLC; Prison Equipment products.
.
This section is based on the products of PSI LLC, which is located at:
2323 N. 2nd St.
Minneapolis, MN 55411
Tel: 612-789-0925
Fax: 612-789-0196
Email: request info ()
Web: www.psillcmn.com
[ Click Here ] for additional information.
PSI LLC has designed, supplied, and manufactured steel and stainless steel equipment and industrial-use furnishings since 1985. We offer a complete line of Access Doors, Pass Thrus, Tables, Benches, Stools, Desks, Cabinets, Shelves, Grab bars, and additional Accessories. We specialize in custom manufacturing any of our products to meet the unique needs of your facility.
Our products are high-quality, custom-made steel and stainless steel furnishings, equipment, and accessories designed for use in Hospitals, Clinics, Institutions, Schools, Cafeterias, Municipalities, Libraries, Parks & Recreation Departments, Hotels, Casinos, Restaurants, Food Service, Food Preparation, Oil Rig and Drilling Sites, Industrial and Manufacturing, Waste Management, Water Treatment, Home and Office, Television and Film props, Sports and Exercise facilities, Military and Military Contractors, Homeless shelters, Charity Organizations, Airports, Nuclear, Coal, Natural Gas Power Plants, Medical Research Facilities, and Clean Rooms.
Our products are custom-made to meet your specifications including including wood tops and all stainless steel construction, as well as laser cutting and laser etching, and finishes in powder coating, painting, and chemical treatment (stainless steel only) available.
Our experienced engineering department is ready to assist you in fitting our products to your facility or designing products that meet the strength, safety and security standards you are looking for. Contact PSI today for more information about custom made steel & stainless steel furnishings, equipment, and accessories!
1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for project.
1.1.1 Tables and Seating.
1.1.2 Accessories.
1.1.3 Cabinets and Lockers.
1.1.4 Doors and Access Points.
1.1.5 Bunks.
1.1.6 Desks.
1.1.7 Shelving.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
1.2.1 Section 04 20 00 - Unit Masonry.
1.2.2 Section 05 40 00 - Cold-Formed Metal Framing.
1.2.3 Section 06 10 00 - Rough Carpentry.
1.2.4 Section 07 91 26 - Joint Fillers.
1.2.5 Section 09 26 13 - Gypsum Veneer Plastering.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.
1.3.1 ASTM A 123/A123M - Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products.
1.3.2 ASTM A 167 - Stainless and Heat-Resisting Chromium-Nickel Steel Plate.
1.3.3 ASTM A 283/283M - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates.
1.3.4 ASTM A 307 - Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength.
1.3.5 ASTM A 325 - Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength.
1.3.6 ASTM A 366/A 366M - Standard Specification for Steel, Sheet, Carbon, Cold-Rolled, Commercial Quality.
1.3.7 ASTM A 480 - Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip.
1.3.8 ASTM A 627 - Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities.
1.3.9 ASTM A 653/A 653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.
1.3.10 ASTM A 924/A 924M - Standard Specification for General Requirements for Sheet Steel, Metallic-Coated by the Hot-Dip Process.
1.3.11 ASTM AWS D1.1 - Welding Code.
1.4 SUBMITTALS
1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.
1.4.2 Product Data: Manufacturer's data sheets on each product to be used, including:
1.4.2.1 Preparation instructions and recommendations.
1.4.2.2 Storage and handling requirements and recommendations.
1.4.2.3 Installation methods.
1.4.3 Shop Drawings: Shop drawings for each product specified, showing fabrication details, composite structure, and materials to be used as well as outlining installation procedures with no exposed fastenings, caulking, etc.
** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
1.4.4 Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
1.4.5 Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.
1.4.6 Manufacturer's Certificates: Certify products meet or exceed specified requirements.
1.4.7 Maintenance Instructions: Complete maintenance instructions for preventative maintenance and repairs of the units shall be submitted for incorporation in Project Data Book.
1.4.8 Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic checking and adjustment of cable tension and periodic cleaning and maintenance of all railing and infill components.
1.5 QUALITY ASSURANCE
1.5.1 Manufacturer Qualifications: A manufacturer engaged in the manufacture of the product for a minimum of 10 years.
1.5.2 Installer Qualifications: An installer engaged in the installation of the product for a minimum of 5 years or as recommended by the manufacturer.
** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
1.5.3 Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
1.5.3.1 Finish areas designated by Architect.
1.5.3.2 Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
1.5.3.3 Refinish mock-up area as required to produce acceptable work.
1.5.4 Preinstallation Meetings: Conduct meetings to verify project requirements, substrate conditions, manufacturer's installation instructions, and warranty requirements. Comply with Division 1 requirements.
1.6 DELIVERY, STORAGE, AND HANDLING
1.6.1 Delivery and Storage:
1.6.1.1 Deliver and store in manufacturer's original, unopened, undamaged containers, identification labels intact.
1.6.1.2 Handle and store products according to manufacturer's recommendations. Store off the ground and leave products wrapped or otherwise protected and under clean and dry storage conditions until required for installation.
1.7 SEQUENCING
1.7.1 Ensure that locating templates and other information required for installation of products of this section are furnished to affected trades in time to prevent interruption of construction progress.
1.7.2 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.
1.8 PROJECT CONDITIONS
1.8.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
1.9 WARRANTY
1.9.1 ?? Extended beyond 1 year??
2 PRODUCTS
2.1 MANUFACTURERS
2.1.1 Acceptable Manufacturer: PSI LLC, which is located at: 2323 N. 2nd St.; Minneapolis, MN 55411; Tel: 612-789-0925; Fax: 612-789-0196; Email: request info (); Web: www.psillcmn.com
** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
2.1.2 Substitutions: Not permitted.
2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
2.2 MATERIALS - GENERAL
** NOTE TO SPECIFIER ** Edit the following General paragraphs as required and applicable to project requirements.
2.2.1 Carbon Steel:
2.2.1.1 Tool resistant Steel: ASTM A 627.
2.2.1.2 Cold rolled steel sheet: ASTM A 366.
2.2.1.3 Plates: ASTM A 283/A 283M.
2.2.2 Stainless Steel:
2.2.2.1 Sheet ASTM A 480 Type 304 with #4 finish.
2.2.2.2 Plate ASTM A 167 Type 304 with #4 finish.
2.2.3 Fasteners: Minimum 3/4 inch (unless otherwise indicated) conforming to ASTM A 307, A 325.
2.2.4 Weld Nuts: Minimum 3/4 inch (unless otherwise indicated) conforming to ASTM A 307, A 325.
2.2.5 Primer Materials: Prime paint all steel surfaces except for product to receive powder coating and those fabricated of stainless steel.
2.2.6 Powder Coating: Polyester or epoxy powder coating to a 2 mil DFT oven cured at 400 degrees F (205 degrees C).
2.2.7 Color Paint Material: Manufacturer's standard finish and color.
2.2.8 Galvanized Steel: Where specified, galvanize products after fabrication to ASTM A 123. Furnish a minimum galvanized coating of 1.25 oz/sq ft (380 g/sq m).
2.2.9 Welding Materials: AWS D1.1; type required for materials being welded.
2.3 TABLES AND SEATING
2.3.1 CB-200 Contoured Bench:
2.3.1.1 Overall Height: 33-3/4 inches
2.3.1.2 Seat Height: 17-3/4 inches
2.3.1.3 Overall Depth 29 inches
** NOTE TO SPECIFIER ** Insert length required. Standard lengths up to 10 feet. Custom lengths are also available with splices required for lengths over 10 feet.
2.3.1.4 Length: ______
2.3.1.5 Top and Sides:
2.3.1.5.1 10 gauge stainless steel top and sides.
2.3.1.5.2 12 gauge stainless steel top and sides.
2.3.1.6 Construction: Top and sides fully welded on all seams and ground for a seamless surface. Holes are drilled along the top and bottom edges of the bench to allow for fastening to angle iron rails mounted on the wall and floor.
2.3.1.7 Dampening Material: 1/2 inch thick material along the interior, covering the full length of the bench.
2.3.1.8 Finish: Chemically degreased with a #4 finish.
2.3.1.9 Options:
** NOTE TO SPECIFIER ** Select the option if required from the following paragraph and delete if not required.
2.3.1.9.1 Detention Handcuff rings or rails
2.3.2 FB-200 Floor Mount Pedestal Bench:
2.3.2.1 Overall Height: 18 inches
2.3.2.2 Seat Depth: 12 inches
** NOTE TO SPECIFIER ** Insert length required. Standard lengths are 6 feet and 8 feet. Custom lengths are also available with splices required for lengths over 10 feet.
2.3.2.3 Length: ______
2.3.2.4 Top:
** NOTE TO SPECIFIER ** Select one of the following paragraphs and delete the one not required.
2.3.2.4.1 10 gauge formed steel with 1-1/2 inch deep flanges on all sides.
2.3.2.4.2 12 gauge stainless steel with 1-1/2 inch deep flanges on all sides.
2.3.2.5 Support Pedestals: 2 inch Schedule 40 (2-3/8 inch o.d.) steel pipe, 18 inches high with 10 gauge steel reinforcing top plate, 8 inch by 8 inch by 7 gauge steel base plate with 1/2 inch bolt holes. Provide on 36 inch maximum spacing.
2.3.2.6 Construction: All joints fully welded and ground smooth.
2.3.2.7 Finish:
** NOTE TO SPECIFIER ** Select the options required from the following paragraphs and delete the ones not required.
2.3.2.7.1 Steel: Chemically degreased and coated with rust inhibitive primer.
2.3.2.7.2 Stainless Steel: #4 finish on face, satin finish inside.
2.3.2.8 Options:
** NOTE TO SPECIFIER ** Select the option if required from the following paragraph and delete if not required.
2.3.2.8.1 Handcuff rings or rails.
2.3.2.8.2 Full length hand cuff bar.
2.3.3 FMS-200 Floor Mount Stool:
2.3.3.1 Overall Height: 18 inches
2.3.3.2 Seat Diameter: 12 inches
2.3.3.3 Seat top: 14 gauge type 304 stainless steel top, 12 inch diameter by 1-1/2 inches deep with a spun #4 finish.
2.3.3.4 Reinforcement: full surface 7 gauge steel reinforcement plate, stitch welded to underside of seat and welded to pedestal.
2.3.3.5 Pedestal: 2 inch Schedule 40 (2-3/8 inch o.d.) steel pipe pedestal, with overall height of 18 inches from floor to top of seat.
2.3.3.6 Base plate: 8 inches by 8 inches by 7 gauge steel base plate, welded to bottom of pedestal with four 1/2 inch diameter holes for bolting to the floor.
2.3.3.7 All joints welded and ground smooth.
2.3.3.8 Finish:
2.3.3.8.1 Steel: Chemically degreased and coated with rust inhibitive primer.
2.3.3.8.2 Stainless Steel: #4 finish on face, satin finish inside.
2.3.3.9 Options:
** NOTE TO SPECIFIER ** Select the option if required from the following paragraph and delete if not required.
2.3.3.9.1 Handcuff rings.
2.3.4 FMWB-200 Floor Mount Wood Bench:
2.3.4.1 Size:
** NOTE TO SPECIFIER ** Insert length required. Custom lengths are available with splices required for lengths over 10 feet.
2.3.4.1.1 Length: ______
2.3.4.1.2 Height/Width: 18 inches high by 19-1/2 inches deep.
2.3.4.2 Top: Two Laminated hardwood planks each 1-1/4 inches thick by 9-1/2 inches wide with two boards bolted side by side for a total width of 19-1/2 inches.
2.3.4.3 Frame: 3/8 inch by 2-1/4 inch steel flat bar, cross braced, floor brackets with 1/2 inch holes at floor flanges.
2.3.4.4 Construction: Planks fastened with 1/4 inch machine threaded carriage screws with lock nuts.
2.3.4.5 Finish: 2 coats of polyurethane finish on wood top. Rust inhibitive primer finish on steel brackets.
2.3.4.6 Options:
** NOTE TO SPECIFIER ** Select the option if required from the following paragraph and delete if not required.
2.3.4.6.1 7 gauge steel brackets for wall mounting. Embedment plates required.
2.3.5 PB-200 Bench Table:
2.3.5.1 Size:
** NOTE TO SPECIFIER ** Select size required and delete those not required. Custom lengths are available with splices required for lengths over 10 feet.
2.3.5.1.1 PB-200-4: 4 Person Bench Table 24 inches by 48 inches.
2.3.5.1.2 PB-200-6: 6 Person Bench Table 24 inches by 72 inches.
2.3.5.1.3 PB-200-8: 8 Person Bench Table 24 inches by 96 inches.
2.3.5.2 Table top:
** NOTE TO SPECIFIER ** Select table top material required and delete the one not required.
2.3.5.2.1 10 gauge steel table top with 2 inch flange each side.
2.3.5.2.2 12 gauge stainless steel table top with 2 inch flange each side.