Display Hidden Notes to Specifier. (Don't Know How? Click Here) s71

SECTION 10 14 00

SIGNAGE

Display hidden notes to specifier. (Don't know how? Click Here)

** NOTE TO SPECIFIER ** 2/90 Sign Systems; Exterior and interior wayfinding systems and signage.
This section is based on the products of 2/90 Sign Systems, which is located at:
5350 Corporate Grove Blvd. S.E.
Grand Rapids, MI 49512
Toll Free Tel: 800-777-4310
Tel: 616-656-4310
Fax: 616-656-4300
Email: request info ()
Web: www.290signs.com
[ Click Here ] for additional information.
2/90 Sign Systems develops comprehensive interior and exterior wayfinding systems for commercial and government clients. With more than three decades of experience planning, installing and maintaining signage systems, 2/90 has a proven history of successfully managing turn-key signage projects for clients across the country.
2/90 Sign Systems has manufactured and installed comprehensive architectural communication solutions for many prestigious corporate, healthcare, education, hospitality and government clients. 2/90's interior architectural facility signage systems and advanced fabrication capabilities enable the creation of high-quality signage to complement any environment. An extensive offering of colors, finishes and countless options with insert configurations, graphic elements and product enhancements, provides a sustainable, modular interior sign solution for our clients while strengthening their brand.

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Wayfinding systems and signage including the following:

1. Exterior architectural sign systems including:

a. Main identification signage.

b. Post and panel signs.

c. Wall mount signs.

d. Dimensional letters.

e. Electronic messaging.

2. Interior architectural sign systems including:

a. Modular sign systems, freestanding.

b. Modular sign systems, window signs.

c. Arc sign systems.

d. Klik sign systems.

e. Enhanced signs.

f. Adaptive signage.

g. VitalSign.

h. InfoBoard.

i. Specialty signage.

j. Digital Signage:

1) EZ ID.

2) Digital directories.

3) Digital bulletins.

4) Digital room displays.

5) Queuing systems.

3. Artwork including:

a. 3StepArt.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 06 20 00 - Finish Carpentry.

B. Section 07 91 26 - Joint Fillers.

C. Section 09 25 23 - Lime Based Plastering.

D. Section 09 70 00 - Wall Finishes.

E. Section 09 90 00 - Painting and Coating.

F. Section 10 13 13 - Electronic Directories.

G. Section 10 14 16 - Plaques.

H. Section 26 50 00 - Lighting.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ASTM International (ASTM):

1. ASTM B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate.

B. United States Access Board, Americans with Disability Act (ADA):

1. Americans with Disabilities Act (ADA), Accessibility Guidelines for Buildings and Facilities (ADAAG).

2. ADAAG 703.3.1 - Braille dimension measurements.

1.4 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Materials, fabrication, finishing, fastenings, hardware, and accessories.

4. Mounting details and installation methods.

C. Shop Drawings: Provide project specific, scaled, shop drawings including:

1. Extents of installation, room sizes, layouts, profiles, signage dimensions, penetrations if any, control dimensions and architectural alignments.

2. Interface with building services and adjacent construction.

3. Material thicknesses and joints, anchorage, trim, hardware and locks, finishes, substrate materials, and accessories.

4. Base building requirements, and installation procedures.

5. Identify typography, artwork, finishes, message locations and similar.

6. Coordinate nomenclature and terminology with sign drawings, message schedule, and location plan.

D. Qualifications: For manufacturer and installer.

E. Certificates: Product certificates signed by the manufacturer certifying materials comply with specified performance characteristics, physical requirements, and project specific requirements.

F. Manufacturers Field Reports: Submit no later than 2 business days after each site visit.

** NOTE TO SPECIFIER ** Delete or edit samples below to meet project requirements.

G. Samples:

1. Selection Samples: Provide manufacturers standard samples for selection of finishes, colors, and textures.

2. Verification Samples: Provide two samples for each product to be installed, minimum size 6 by 6 inch (150 by 150 mm).

** NOTE TO SPECIFIER ** Below for interior signs only. Delete if only exterior signs or artwork are used.

a. Interior Signs: Submit one full size sample of each type, style, and color including method of attachment. Accepted samples may be incorporated into finished work.

H. Closeout Submittals:

1. Operations and maintenance data.

2. Warranty.

1.5 QUALITY ASSURANCE

A. Single Source Responsibility: Except as noted below, all materials and components shall be fabricated by a single manufacturer including mounting hardware and materials, fittings, fastenings, lighting, electronics, finished surfaces and concealed internal supports.

** NOTE TO SPECIFIER ** Edit or delete list below to reflect project conditions.

1. Changeable messages and inserts are provided by the owner.

2. Exterior concrete footings engineered and installed by general contractor.

B. Manufacturer Qualifications: Minimum 10 years or more experience in fabrication of solid phenolic materials, experienced in performing work of similar size and scope, and with production facilities to meet the project schedule.

C. Installer Qualifications: Specialized in performing signage work, with minimum 2 years experience installing similar products.

** NOTE TO SPECIFIER ** Include a mock-up if the project size or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

D. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship and finishes.

1. Finish areas designated by Architect.

2. Do not proceed with remaining work until workmanship is approved by Architect.

3. Refinish mock-up area as required to produce acceptable work.

4. Accepted mock-up may be incorporated into the finished work and shall establish the standard of workmanship and acceptance for remaining work.

1.6 PRE-INSTALLATION MEETINGS

A. Convene at the project site minimum two weeks prior to starting work of this section.

1.7 DELIVERY, STORAGE, AND HANDLING

A. Ordering: Comply with manufacturer's ordering instructions and lead time requirements to avoid construction delays.

B. Do not deliver signs until facility is enclosed and conditioned within temperature and humidity ranges expected of final occupancy.

C. Deliver and store products in manufacturer's original, unopened packaging bearing the brand name and manufacturer's identification until ready for installation.

1. Package and label signs in groups indicated on the drawings.

2. Prevent contact with materials or project conditions that may cause corrosion, discoloration, or staining.

3. Store signage materials in a safe, dry, above ground location until mounting surfaces are ready for installation.

4. Protect from damage from other trades.

D. Handling: Handle materials to avoid damage.

1.8 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.9 SEQUENCING

A. Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

** NOTE TO SPECIFIER ** Delete below if warranty is not required.

1.10 WARRANTY

A. Provide manufacturer's standard one-year product warranty against defects in materials.

** NOTE TO SPECIFIER ** Edit or delete below if extra materials are not required.

1.11 EXTRA MATERIALS

A. Provide extra signage equal to 2 percent of each sign type, no less than one complete sign of each type requested by the owner.

B. At completion of installation, submit extra stock of signs and components as indicated in the Sign Message Schedule.

C. Expedited Sign Maintenance Program: Provide manufacturer's coupon books for redemption of expedited replacement inserts and additional signage.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: 2/90 Sign Systems, which is located at: 5350 Corporate Grove Blvd. S.E.; Grand Rapids, MI 49512; Toll Free Tel: 800-777-4310; Tel: 616-656-4310; Fax: 616-656-4300; Email: request info (); Web: www.290signs.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 MATERIALS

A. Aluminum: Manufacturer's standard 6063-T6/T5 or 6061-T6 alloy.

** NOTE TO SPECIFIER ** Edit below for as required, delete not required or if signs are only exterior.

B. Interior Panel Substrates:

1. 0.080 to 0.125 (2 to 3.2 mm) aluminum to ASTM B209.

2. Acrylic.

3. Aluminum composite material.

4. Polycarbonate.

C. Interior Enhanced Backer Materials: Applied to back of signs with adhesive.

1. Standard Backer: 1/4 inch (6 mm) acrylic.

a. Patterned Backer: Modified with digital receptive polymer to accept VOC free, ultra-violet inks digitally applied directly to the substrate subsurface.

b. Solid Color Backers: Painted subsurface in acrylic lacquer.

2. Aluminum Backer: 0.028 inch (0.71 mm) coil anodized aluminum laminated to 0.090 inch (2.2 mm) ABS plastic.

3. Wood Backer: 0.031 inch (0.78 mm) vertical grade laminated to 0.090 inch (2.2 mm) extruded ABS plastic.

D. Interior Sign Insert Materials:

1. ABS Inserts:

a. Composition: 0.090 inch (2.2 mm) extruded ABS plastic core with 0.003 inch (0.07 mm) UV resistant acrylic cap bonded during extrusion/texturing process.

b. Fixing Accessories: Pressure bonded to extruded PVC hook using high-bond, pressure sensitive adhesive.

c. Color: Integral color or painted in acrylic lacquer as specified with signs.

d. Protective Coating: Chromium industries #HM335RA texture pattern to prevent glare and disguise fingerprints.

2. Aluminum Inserts:

a. Composition: 0.028 inch (0.71 mm) coil anodized aluminum precision slit and laminated to extruded 6063-T5 aluminum Carrier.

b. Fixing Accessories: Acrylic adhesive.

3. Wood Inserts:

a. Composition: 0.031 inch (0.78 mm) vertical grade laminate precision slit and laminated to extruded 6063-T5 aluminum

b. Fixing Accessories: Acrylic adhesive.

4. Window Inserts:

a. Composition: Extruded 6063-T5 aluminum to hold die-cut paper insert with a clear 0.020 inch (0.5 mm) textured polycarbonate lens.

b. Fixing Accessories: Integral hooks for connection to Structural Rail.

c. Colors: Anodized black, anodized satin or painted acrylic lacquer as specified with signs.

5. Subsurface Copy Inserts:

a. Composition: Textured 0.020 inch (0.5 mm) clear polycarbonate face with subsurface Direct Print, High Performance Cast PVC Vinyl, or Silkscreen copy. Back sprayed with acrylic lacquer and laminated to an extruded aluminum Carrier Insert.

6. UDO Subsurface Copy Inserts:

a. Composition: Textured 0.020 inch (0.5 mm) clear polycarbonate face with subsurface Direct Print, High Performance Cast PVC Vinyl, or Silkscreen copy which slides into Window Insert.

7. Jewel Inserts:

a. Composition: 0.060 inch (1.5 mm) non-glare acrylic painted subsurface in acrylic lacquer laminated to 0.030 inch (0.7 mm) ABS pressure bonded to extruded PVC hook using high bond, pressure sensitive adhesive with first surface Direct Print, applied High Performance Cast PVC vinyl, Silkscreen, or Tactile/Raster Braille copy.

8. Sliding Inserts:

a. Composition: Extruded 6063-T5 aluminum with a black, or anodized satin finish with integral hooks for connection with Structural Rail.

b. Fixing Accessories: Holds 0.010 inch (0.2 mm) textured polycarbonate with subsurface Direct Print, High Performance Cast PVC Vinyl, or Silkscreen copy.

c. Sliding Insert moves horizontally with an inset finger press exposing different graphic information.

9. Photo-Luminescent Inserts:

a. Composition: 0.065 inch (1.65 mm) PVC Strontium-Aluminates laminated with pressure-sensitive permanent acrylic adhesive to 0.030 inch (0.7 mm) ABS material.

b. Fixing Accessories: Pressure bonded to extruded PVC hook using high bond, pressure sensitive adhesive.

c. Color: Photo-luminescent material is light green. Reference manufacturer data for Best Level Luminance Test Conditions.

10. ADA, Integral Tactile Inserts:

a. Composition: Graphics and Insert materials are one piece. Tactile Photopolymer Inserts are 0.080 inch (2 mm) phenolic photopolymer with raised copy etched to 0.032 inch (0.8 mm).

b. Fixing Accessories: Pressure bonded to extruded PVC hooks with adhesive.

c. Colors: Background is painted in acrylic lacquer in the specified Insert color. Top surface of copy characters is then added by roller printing in the specified copy color using Silkscreen inks.

11. ADA, Applied Tactile Inserts:

a. Composition: Computer Aided Router cuts acrylic characters 0.032 inch (0.8 mm) thick; bonded to ABS, aluminum or wood laminate Inserts using 3M 467 adhesive.

b. Raster Method of Braille consists of 0.059 inch (1.5 mm) diameter clear acrylic beads set into pre-drilled holes on ABS, aluminum or wood laminate Inserts resulting in 0.032 inch (0.8 mm) Braille text.

12. ADA, Subsurface Tactile Inserts:

a. Composition: High Performance Cast PVC vinyl bonded with a profile film reverse cut by computer, and applied subsurface to clear, vacuum thermoformable PETG. Materials are put into a Heat Vacuum Applicator (HVA) to form around the three dimensional graphics, afterwards the Braille is then punched.

b. Fixing Accessories: Insert is back sprayed with acrylic lacquer and laminated to an extruded aluminum carrier Insert.