text for tender specifications ecos PM 230V.doc
Overview occupancy sensors EPV ecos 230V
Ceiling height up to 5 meters
Occupancy sensor EPV ecos PM/230V/5
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5
Product number: 101918
Fixed delay time 10 minutes, without daylight sensing, built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Installation preferably in places without daylight influence (hallways, bathrooms and toilet areas, etc).
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/5T
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5T
Product number: 101920
Adjustable delay time 10 seconds up to 14 minutes, without daylight sensing, built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Installation preferably in places without daylight influence (hallways, bathrooms and toilet areas, etc).
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/5L
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5L
Product number: 101919
Adjustable delay time 10 seconds up to 14 minutes, built-in daylight sensor and twilight level switch to deactivate occupancy sensing when sufficient light is available, adjustable from < 100 Lux - > 1000 Lux.
Built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: individual offices, small conference rooms.
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/5K DIM
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5K
Product number: 101926
Adjustable delay time 10 seconds up to 14 minutes. Occupancy based dimming via 1-10V. In case of occupancy the lights will dim up smoothly to maximum light level. Once the area is vacant and the preselected delay time has elapsed the lights will dim down in soft ramps to the adjustable minimum light level
Load carrying capacity 1-10V = max. 10mA passive, 1mA active
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: warehouses, multi-storey car parks, halls and corridors
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/5LSa DIM
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5LSa
Product number: 101921
Adjustable delay time 10 seconds up to 14 minutes.
Daylight harvesting via 1-10V. Adjustable dimming set point from < 100 Lux - > 1000 Lux. Lights are switched on/off based on occupancy. When sufficient ambient light is available, the artificial light will remain in maximum dimming position for the set delay time. After that, the artificial light is turned off, regardless of motion in the room.
Load carrying capacity 1-10V = max. 10mA passive
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: offices, class rooms, conference centres etc.
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/5LSb DIM
Ceiling installation, ceiling height up to 5m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/5LSb
Product number: 101922
Adjustable delay time 10 seconds up to 14 minutes.
Daylight harvesting via 1-10V. Adjustable dimming set point from < 100 Lux - > 1000 Lux. When sufficient ambient light is available, the artificial light will remain in maximum dimming position as long as there is any motion in the room. The lights will turn off only when the room is vacant.
Load carrying capacity 1-10V = max. 10mA passive
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: offices, class rooms, conference centres etc.
Sensor covers rectangular area on the floor, approx. 50m2 observation area at 2.80m installation height
Ceiling height max. 5m
Observation area continuously adjustable from 100 % to 60 % through pull-out shading ring around the digital sensor lens.
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Ceiling height 12m
Occupancy sensor EPV ecos PM/230V/12
Ceiling installation, ceiling height up to 12m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/12
Product number: 102052
Fixed delay time is about 10 minutes, without daylight sensing, built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Installation preferably in places without daylight influence (hallways, bathrooms and toilet areas, etc).
Sensor covers rectangular area on the floor, approx. 225m2 observation area at 6m installation height
Ceiling height max. 12m
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/12T
Ceiling installation, ceiling height up to 12m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type: ecos PM/230V/12T
Product number: 102053
Adjustable delay time 10 seconds up to 14 minutes, without daylight sensing, built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Installation preferably in places without daylight influence (hallways, bathrooms and toilet areas, etc).
Sensor covers rectangular area on the floor, approx. 225m2 observation area at 6m installation height
Ceiling height max. 12m
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/12L
Ceiling installation, ceiling height up to 12m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type : ecos PM/230V/5L
Product number: 102054
Adjustable delay time is 10 seconds up to 14 minutes, built-in daylight sensor and twilight level switch to deactivate occupancy sensing when sufficient light is available, adjustable from <100 to > Lux.
Built-in high-performance relay (powerful Tungsten double-latch relay)
Switching capacity 2300VA continuous or 800A/200µs inrush current
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: individual offices, small conference rooms.
Sensor covers rectangular area on the floor, approx. 225m2 observation area at 6m installation height
Ceiling height max. 12m
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€
Occupancy sensor EPV ecos PM/230V/12K DIM
Ceiling installation, ceiling height up to 12m
Operating voltage 230V (50-60Hz)
Make: EPV Electronics GmbH
Type : ecos PM/230V/12K
Product number: 102072
Adjustable delay time 10 seconds up to 14 minutes. Occupancy based dimming via 1-10V. In case of occupancy the lights will dim up smoothly to maximum light level. Once the area is vacant and the preselected delay time has elapsed the lights will dim down in soft ramps to the adjustable minimum light level
Load carrying capacity 1-10V = max. 10mA
Ambient temperature = 0 – 50°C
Protection class IP41 at front panel
Typical installations: warehouses, multi-storey car parks, halls and corridors
Sensor covers rectangular area on the floor, approx. 225m2 observation area at 6m installation height
Ceiling height max. 12m
Connection via WAGO kit 232-103/025-000, kit with strain relief & cover included in delivery
Ceiling cutout D = 45mm, colour white, housing PC V0 (UL)
High immunity to electromagnetic radiation 10V/m by means of digital PIR Signal Processing
Installation with the enclosed standard clip (two-hand), please check accessories for other mounting options.
Quantity: ………………………… Price/Unit: …………………………€ Total: …………………………€