Digital Signature ( PKI ) - Vendor Help Guide

CONTENTS

SECTION-1 PKI Installation page - 2

SECTION-2 Procedure for Log-in using PKI eTokenpage - 6

SECTION-3 Verification of E-token and IE settingspage - 9

(If unable to login after installation and IE settings)

SECTION-1

PKI Installation

  1. Install the EXE from CD

eToken Model / nCode/TCS/Others
Step A / Insert CD to CD drive
Step B / Install etoken drivers
Step C / Install CA and CCA certificates
  1. Restart the system
  2. Plug the PKI Key in System
  3. Open IE browser

2)View DSC serial number:

  1. Insert the token, open the IE>Click on Tools>Click Internet Options>Click on Contents>Certificates – You will get thename of the Certificate user in the window.
  2. Select the certificate and click on “view” button and go to “detail” and you can view the serial number of certificate.

c) Same serial number should be filled in Vendor registration page.

i)PKI Signature?  YES

ii) PKI Based Login ?  YES

iii) Dig. Cert. S.No : (Filled by vendor with out any blank space between two digit)

3).Enable controls:

a)Go to Tools Internet options, Click ‘Security’, then select ‘Internet’.

b)Click ‘Custom Level’ and “Enable” all the options and make “Low safety” for S/w channel permissions.

c)Same for Local Intranet.

d)Same for Trusted Sites.

d).Trust the website:

i)Select‘Trusted Sites’ and click ‘Sites’.

ii)Uncheck the option ‘Require Server Verification (https) for all sites in this zone’ and write the website address:

iii)Click ‘Add’.

iv)Again add the address:

v)Click ‘Add’.

vi)Check the option ‘Require Server Verification (https) for all sites in this zone’

vii)Click ‘OK’ to save the settings.

e) Click ‘OK’ to save the setting.

SECTION-2

Procedure for Log-in using PKI eToken

1) Go to browser, provide E-Tendringuser-id and passwordand press enter.

3)Press click here to login.

Note:- If downloading PKI COMPONENTS screen appears,wait until certificate selection screen appears.(it may take more than five minutes as it has to download TCS Data Singing Control component for the first time)

3) Select your certificate and press ok.

4)Provide eToken password and press ok.

5)Re-enter E-Tendring user-id and password, press enter.

SECTION-3

Verification of E-token and IE Settings

(If unable to login after installation and IE settings)

1) Insert the token, click Internet Options – Content – Certificates – You will get the name of the Certificate user in the window.

2) If downloading PKI COMPONENTS screen appears,wait until certificate selection

screen appears.(it may take more than five minutes as it has to download TCS Data

Singing Control component)

This can be checked by (This step is for first time log-in only)

Go to Tools--> Internet options--> General--> Settings--> View 0bjects

Page 1 of 12