Tissot, Silen-T Watch

Instructions

Two audio CDs are included with your new Silen-T watch. The one wrapped in plastic is from Tissot and has verbal instructions in several languages. The CD in the paper sleeve containing these text instructions also has an audio version of the English verbal instructions at a slightly faster speed than the original Tissot file.

Slide the box containing the watch out of its cardboard sleeve. The lid will lift off where you feel a crack on either long side of the box. The watch and warranty card are enclosed. You’ll find the serial number for the warranty card on the back of the watch. A book called “the Story of a Watch Company” can be pulled out by a small tab at one corner of the box.

Congratulations on your new Silen-T watch.

Here are your easy-to-use instructions.

Setting the time.

  1. Pull out the stem.
  2. Place your finger on the sapphire crystal above the desired hour setting.
  3. Then place your finger on the sapphire crystal above the desired minute setting.

Setting the alarm.

  1. Press the stem for more than two seconds until the first vibration.
  2. Place your finger on the sapphire crystal above the desired hour setting until you feel a vibration.
  3. Place your finger on the sapphire crystal above the desired minute setting until you feel a vibration. Keep your finger on the crystal to advance the setting additional minutes past the increment you are touching.

Reading the time.

  1. Press and release the stem.
  2. Wait half a second and then place your finger on the sapphire crystal at the edge of the bezel and trace your finger clockwise around it until you sense a vibration. A continuous vibration is hours and an intermittent vibration is minutes.

Reading the alarm.

  1. Press the stem.
  2. Wait half a second and then place your finger on the sapphire crystal at the edge of the bezel and trace your finger counter-clockwise around it until you sense a vibration. A continuous vibration is hours and an intermittent vibration is minutes.

Activation and deactivation of the alarm.

  1. Press the stem to activate the alarm.
  2. Place your finger on the sapphire crystal at the 12 o’clock position. Two vibrations indicate that the alarm has been activated.
  3. Press the stem to deactivate the alarm.
  4. Place your finger on the sapphire crystal at the 6 o’clock position. One vibration indicates that the alarm has been deactivated.

Band.

Two band styles are available for the Silen-T, metal and leather. The leather band has a 3-piece folding clip. Fold it in upon itself and snap both wings to close the band. The leather band has a metal piece with a pin, which fits, into small holes running from the tip 3 inches up the strap to adjust to your wrist size.

Warranty, two years.

Any authorized Tissot dealer can repair the Silen-T. Tissot is a member of the Swatch Group.