SintroNex
Lead Forming; Axial Cut and Form; Radial Cut & Form; Tab Pack Cut & Form; Dual In-Line Package Cut & Form; Wire Processing, Cutting and Stripping
Lead Forming Equipment
Axial Cut and Form
CO34 Axial Cut and Form
Cutting & Bending Machine for Horizontal Mounting of Axial Components
/ Available Form
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: mm (inches) / 203L x 203W x 280 H
Pneumatic: / 4-6 bar (60-80 psi)
CO42 Axial Cut and Form
Cutting & Forming Machine for Horizontal Mounting of Axial Components
/ Available Form
Model CO42
The Streckfuss models C042 and C042/S are designed to cut and form the leads ofaxial components. A variety of form configurations can be achieved through the use of interchangeable die sets, which can be changed in less than 5 minutes. The set up adjustments are simple to make and secured to provide accurate forming on every component.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: mm (inches) / 508 L x 304 W x 228mm H (20.0" L x 12.0" W x 9.0" H)
Pneumatic: / 4 - 6 bar (60 - 80psi)
CO43/EAxial Cut and Form
Cutting and Bending Machine for Horizontal & Vertical Mounting of Axial Components
/
Available Forms
Model CO43/E
The Streckfuss model CO43/E is designed to form axial leaded components for both horizontal and vertical mounting. Fully adjustable, a wide variety of form shapes are possible through the use of interchangeable die sets and mounting kits. Tooling changes can be made quickly and easily. All set up adjustments are simple to make and secured to provide accurate forming of each component lead.
Machine Data
Production Rate: / 7,000 pcs/hr
Dimensions:mm (inches) / 600L x 440W x 420H (24.0 L x 18.0"W x 17.0" H)
Electrical: / 220v, 50hz, 0.12kw (110v, 60hz, 0.12kw)
CO44 & CO44/S Axial Cut and Form
Cutting & Forming Machine for Vertical Mounting of Axial Components
/ Available Forms
Model CO44 & CO44/S
The Streckfuss models C044 and C044/S are designed to cut and form leads of axial components for vertical mounting. A variety of form shapes are available through the use of interchangeable die sets. The set up adjustments are simple and secured to provide accurate forming of every component lead.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: mm (inches) / 458L x 203 W x 203 H (18.0" L x 8.0" W x 8.0"H)
Pneumatic Requirement: / 4 - 6 bar (60 - 80 psi)
Radial Cut and Form
CO52/B Radial Cut and FormCutting & Forming Machine for Loose Radial Components
/
Available Forms
ModelCO52/B
The Streckfuss model C052/B is designed to cut and form radial components with 2 leads. A variety of form shapes are possible through the use of interchangeable die sets. The triangular shaped center die allows components with lead spans from 5.08mm to 17.25mm (.200" to .680") to be processed on a single die. Adjustments are provided for the placement and exaggeration of the form. Easy to operate, the C052/B offers an economical solution to quality forming of loose, radial components.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: mm (inches) / 254mm L x 254mm W x 89mm H
Pneumatic: / (10.0" L x 10.0" W x 3.5" H)
CO69/G
Cutting & Forming Machine for Taped Radial Components
/ Available Forms
Model CO69/G
The Streckfuss model C069/G is designed to form and cut taped radial components with 2 or 3 leads. With a full range of adjustments the interchangeable die sets can be tailored to each application. Their modular design makes tooling changes quick and easy. With a progressive die arrangement a wide variety of form configurations are possible. Versatility, reliability, and quick changeover make the C069/G a beneficial addition to any production line.
Machine Data
Production Rate: / 10,000 pcs/hr
Dimensions: mm (inches) / 1100L x 550W x 500H (43.5 L x 21.5W x 20.0”H)
Electrical: / 220v, 50Hz, 0.12kw (110v, 60Hz, 0.12kw)
CO92 Radial Cut and Form
Universal Cutting and Forming Machine for Taped Radial Components
/
Model C092
Model C092
The Streckfuss model C092 has been developed to process taped components with hole pitches of 12.7 mm or 15 mm with one machine. To eliminate any kind of inconsistencies due to variances in taping, this machine is fitted with a touch-tool that will verify the cut length. The machine was developed with two processing units for multiple die sets. The die inserts can be exchanged very quickly. Because of the dual processing-units a wide range of bending and stamping forms can be processed
Machine Data
Production Rate: / max. 10.000 pcs/h
Dimensions:mm (inches) / 1100(with safety-shut-down) x 450 x 500 (43.5" L x 19.5" W x 19" H)
Electrical: / 230v, 50Hz, 110w (110v, 60Hz, 110w)
Pneumatic: / 6 bar (60 - 80 Psi)
CO93
/ Available Forms
Model CO93
The CO93 was designed to produce a "J" bend to one lead of a component that has polarity. CO93 incorporates a touch tool that ensures a specific lead length (+/- .1mm) even if the components are not taped to an exact tolerance. Optionally, the CO93 offers a C Tester that can test the components for correct polarity prior to the forming station and remove them if they fail. Because the CO93 only accepts components on tape, either reeled or ammo pack formats are acceptable. Also because of its flexibility, the CO93 allows the processing of components taped on 12.7 or 15mm spacing by using easy-to-change tape guides and tools.
Machine Data
CO94
Automated Cutting and Forming Machine for Radial Leaded Components
/
Available Forms
Model CO94
The C094 was specifically designed for an efficient way of cutting radial taped components. Additionally, the system can be configured for 90 bending or forming of radial components. (For bending and forming specifications please contact us) Because the C094 only accepts components on tape, either reeled or ammo pack formats are acceptable. Also because of its flexibility, the C094 allows the processing of components taped on 12.7 or 15mm spacing by using easy to change tape guides and tools.
Machine Data
Production Rate: / 5,000 pcs/hr
Dimensions: mm (inches) / 500 W x 400 L x 500 H (20" W x 16" L x 20" H)
Electrical Requirement: / 220v, 50/60Hz, 0.12kw (110v, 50/60Hz, 0.2kw)
Tab Pack Cut and Form
CO67 Tab-Pack Cut and FormCutting & Forming Machine for Horizontal & Vertical Mounting of Tab-Pack Components
/
Available Forms
Model CO67
The Streckfuss model C067 is designed to cut and form tab-pack components with 3 to 7 leads for vertical or horizontal mounting. A variety of form shapes are available through the use of interchangeable die sets and feed magazines. The feed magazines are configured for hand or tube feeding. Tooling changes can be done quickly and easily making the C067 ideal for high mix production environments.
Machine Data
Dimensions: mm (inches) / 300L x 300 W x 400 H (12" L x 12.0" W x 16.0" H)
Electrical Requirement: / 220v, 50/60Hz, 0.12kw (110v, 50/60Hz, 0.12kw)
CO68Tab-Pack Cut and Form
Cutting & Forming Machine for Horizontal & Vertical Mounting of Tab-Pack Components
/ Available Forms
CO68
The Streckfuss model C068 is designed to cut and form tab-pack components with 3 to 7 leads for vertical or horizontal mounting. A variety of form shapes are available through the use of interchangeable die sets and feed magazines. All feed magazines are configured for hand or tube feeding. Tooling changes can be done quickly and easily making the C068 ideal for high mix production environments.
Machine Data
Production Rate: / 3,600 pcs/hr
Dimensions: mm (inches) / 600 L x 450 W x 600 (24" L x 18" W x 24" H)
Electrical: / 220V, 50Hz, 0.12 kw (110V, 60Hz, 0.12 kw)
CO69 S Tab-Packs
/
Available Forms
Model CO69 S
The Streckfuss model C069/S is designed to cut and form tab-pack components with 3-23 leads for vertical or horizontal mounting. The feed magazines and die sets are modular in design to allow quick set up changes. All cutting and forming parameters are manufactured to customer specification.
Production Rate: / 3,600 pcs/hr
Dimensions mm (inches) / 600L x 600W x 450H (23.5" L x 23.5" W x 18.0" H)
Electrical: / 220V, 60 Hz, 0.12 Kw (110V, 50/60 Hz, 0.12 Kw)
Dual Inline Package Cut and Form
AO75Dual Inline PackageLead Straightening and Cutting Machine for DIP Components
/ Available Forms
Model AO75
The Streckfuss model A075 is designed to straighten cut the leads of dual in-line components utilizing a tube-to-tube feeding configuration. Fully adjustable, the A075 requires no die changes, which allows a wide range of component sizes to be processed quickly and easily. The cut length and lead span adjustment are displayed on a digital panel meter and the operating speed is infinitely variable.
Machine Data
Production Rate: / 3,500 pcs/hr
Dimensions: mm (inches) / 458 L x 356W x 381H (18.0" L x 14.0" W x 15.0" H)
Electrical: / 220v, 50Hz, 0.12kw (110v, 60Hz, 0.12kw)
AO75/RiDual Inline Package
Lead Straightening Machine for DIP Components
/ Available Forms
Model AO75 Ri
The Streckfuss model A075/Ri is designed to straighten the leads of dual inline components utilizing a tube to tube feeding configuration. Fully adjustable, the A075/Ri requires no die changes, which allows a wide range of sizes to be processed quickly and easily. The lead span adjustment is displayed on a digital panel meter and the operating speed is infinitely variable
Machine Data
Production Rate: / 10,000 pcs/hr
Dimensions: mm (inches) / 458L x 356 W x 381 H (18.0 L x 14.0" W x 15.0" H)
Electrical: / 220v, 50Hz, 0.12kw (110v, 60Hz, 0.12w)
Special Application Lead Formers
CO60 Special Application Wire FormerAutomated cutting and forming machine for jumper wires
/ Available Forms
Model CO60
The Streckfuss model C060 is designed to cut and form 20 to 22 gauge jumper wires. The machine has an adjustable center-to-center distance and uses interchangeable die sets to vary the cut length. The wire straightener, feed clamp and backlash assembly combined with an adjustable feed stroke produce a precise jumper wire every time.
Machine Data
Production Rate: / 7,000 pcs/hr
Dimensions: mm (inches) / 915 L x 254W x 305H (36" L x 10" W x 12" H)
Electrical Requirements: / 220v. 50/60Hz, 0.25kw (110v, 50/60Hz, 0.25kw)
Lead Trimming Equipment
Universal Lead Cutting
CO53 Radial Lead CutterPneumatic single feed lead trimmer
/ Pneumatic single feed lead trimmer for radial components with lead diameters up to 0.032"Model CO53
The Streckfuss model C053 is designed to cut the leads of loose radial components with lead diameters up to 0.8mm [.032"]. The machine utilizes a cutting-and-shear plate combination and is supplied with pre-drilled hole patterns. Standard cut length is 3.0mm [.120"]. Foot pedal operated, the C053 provides a simple, inexpensive solution to cutting loose radial leads.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: mm (inches) / 304mm L x 127mm W x 115mm H
Pneumatic: / 4 -6 bar (60 - 80 psi)
Model CO57
Universal Radial Lead Cutter
/
Universal Cutting Machine
Model CO57The Streckfuss model C057 is designed to cut the leads of loose radial components with lead diameters up to .8mm [.032"]. The machine utilizes spring loaded cutting blade traversing a top shear plate to perform the cutting action. The standard shear plate is supplied with pre-drilled hole patterns at a thickness of 3.0mm [.120"]. Foot pedal operated, the C057 provides a simple, economical solution to cutting radial loose components.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: / 430 L x 203 W x 76mm H (17.0" L x 8.0" W x 3.0" H)
Pneumatic: / 4 - 6 bar (60 - 80 psi)
CO58
Universal Cutting Machine for Heavy Leads
/ Universal Cutting Machine for Heavy Leads
Model CO58
The Streckfuss model C058 is designed to cut the leads of loose radial components with diameter up to 2.54mm [.100"]. The machine utilizes a large mass cutting blade traversing the top shear plate. Supplied with a blank, unhardened shear plate a variety of custom plate designs are available including pockets, slots, and multi-levels. Foot pedal operated, the C058 provides the solution for hard to cut components with large leads.
Machine Data
Production Rate: / 500 - 1,000 pcs/hr
Dimensions: / 762L x 229W x 115mm H (30.0" L x 9.0" W x 4.5" H)
Workable Area: / 178mm L x 152mm W (7.0" L x 6.0" W)
Pneumatic: / 4 -6 bar (60 - 80 psi)
Taped Radial Cutting Machines
CO66/H Cutting Machine for Taped Radial Components/ Cutting Machine for Taped Radial Components
Model CO66/H
The Streckfuss model C066/H has been developed to cut the leads of taped radial components. Manually operated, the machine features an adjustable cut length and easy loading transport mechanism. The quick release table clamp allows the machine to be moved easily from one place to another.
Machine Data
Production Rate: / 1,200 pcs/hr
Dimensions: / 228L x 101W x 241mm H (9.0" L x 4.0" W x 9.5" H)
Cut Length: / 3.0mm (0.118") minimum
CO66/MACutting Machine for Taped Radial Components
/ Cutting Machine for Taped Radial Components
Model CO66/MA
The Streckfuss model C066/MA has been developed to cut leads of taped radial components.
A unique body reference feature ensures an exact cut length allowing for variations in the component’s seating plane in the tape. Benefits include a reduction in rework and post solder trim operations due to inconsistent lead lengths.
Machine Data
Production Rate: / 3,600 pcs/hr
Dimensions: / 432 L x 280W x 330mm H (17.0" L x 11.0" W x 13.0" H)
Electrical: / 220v, 50hz, 0.12kw (110VAC, 60Hz, 0.12kw)
Cut Length: / 3.0mm (.118") Standard
Cable/Wire Cutting Systems
CutterPneumatic cutting equipment with foot pedals for cables, strands, wires, tubes, ropes.
Model 7 up to 7mm Ø
Model 13 up to 13 mm Ø
Model 20 up to 20 mm Ø
Model 25 up to 25 mm Ø
Special Designs available. /
Schneidmeister 9
Cutting machine with material feed opening up to 9 mm in diameter. Driven by stepping motor, cutting length is measured electronically, pneumatic cutting.
Schneidmaster 12
Cutting machine with material feed opening up to 12 mm in diameter. Driven by stepping motor, cutting length is measured electronically, pneumatic cutting. Available designs for wires, hoses, films, etc. /
Schneidmaster 15/40
Cutting machine with material feed opening up to 15 mm in diameter or 40mm in width. Belt drive by means of stepping motor, cutting length is measured electronically, pneumatic cutting
Cutting Machine with material feed opening up to 20 mm in diameter or 85 mm in width. Belt drive by means of stepping motor, cutting length is measured electronically, pneumatic cutting. SM 30/85 with material feed opening up to 30 mm in Ø.
Wire Processing - Cut and Strip Systems
/ Isomat 12/360 or 20/360 PCMachine for cutting and stripping of wires up to 12 or 20 mm in diameter. Stripping length up to 360mm total in one operation. It is possible to strip the right end theoretically infinite. Input of data for the working operation by means of keyboard, also for inkjet printer. Blades and guides can be fixed by being stuck.
Isomat 12/180
Machine for cutting and stripping of wires up to 12 mm in diameter. Stripping length up to 180 mm total for both cable ends. Input of data for the working operation by means of keyboard. Blades and guides can be fixed by being stuck. /
/ Maximat 20
Machine for cutting and stripping of wires up to 20 mm in diameter. Stripping length to the left 180 mm, to the right, theoretically infinite. Continuous control of blades and input of cutting and stripping length, quantity, speed and other data for the working operation by means of keyboard.
Isomat 20/360
Machine for cutting and stripping of wires up to 29 mm in diameter. Stripping length max 360 mm, to the right theoretically infinite. Continuous control of quantity, speed and other data for the working operation by means of keyboard. /
Wire Processing - Accessories
Trommelheber
The Reeler for cabledrums and bobbins up to a diameter of 1000 mm. Max weight 1000 Kg. /
Vorschub 30/85
Material feed mechanism driven by belt for cable and strands up to a diameter of 30 mm and for ribbon cables up to a width of 85 mm. Large tractive force thus ensuring a high precision of lengths. Can be combined with machines mentioned in cable/wire cutting systems and cut and strip systems.
WTM2
Ring winding device equipped with two driven winding drums. Can be combined with nearly all cutting machines. /
Materialstapler
Longitudinal collecting unit in sizes of 2,3 and 5 meters. With/without intermediate collecting unit. Can be combined with machines mentioned in cable/wire cutting systems and cut and strip systems.
Wire Processing - Stripping and Dismantling Equipment
Simplex S
Dismantling equipment for cables and strands up to 15 mm in diameter. Dismantling length up to 150 mm approx. / Simplex 30
Dismantling equipment for cables and strands up to 30 mm in diameter. Dismantling length up to 150 mm approx. Blades slotted in.
Duplex D2
Dismantling equipment for multi-cored cable, for example 5x1.5 mm2. Dismantling length up to 170 mm approx. Dismantling and stripping in one go. /
Pneumatic machine for the stripping of cables up to 30 mm in diameter. Change of blades and guide sleeves without employing any tools. Types available with stripping lengths of 100, 300, 500, 1000, 1500 mm. Blade systems for special cable types, e.g. flat or rubber cables.
Simplex E (not shown) same as D2 but without strand stripping.
FA 406
Electric stripping machine for strands p to 10 mm in diameter.
Stripping length up to 36 mm.
Also available with twisting head. / FE 0400
Electric stripping machine for strands from 0.05 - 2.5 mm2.
Stripping length 1.5 to 10 mm. Can be adjusted for any stripping lengthand cross-section. Partial removal possible.
Special models:
- stripping length 11,5 - 20 mm
- for thin insulations.
Wire Processing - Magnetic Wire Strippers
AbisofixHand-held stripping machine for varnished wires, speed control using Transformer
Model 1 for 0.2 - 0.8 mm Ø
Model 3 for 0.6 - 2.0 mm Ø
Model 5 for 1.2 - 4.0 mm Ø
Additional cutter heads for other fields of work are available. / Finofix
Stripping machine with conical fibre-glass brushes for varnished wires fro 0.04 - 0.3 mm in diameter.
BTM 2
profile varnished wires from 0.2 mm - 6.0 mm.
A desk machine with steel wire brushes for stripping of round and
Suitable for a brush diameter of 20 mm, 22 mm, 30 mm, and 40 mm. / Fuchs Star
Hand-held stripping machine for varnished wires, mains operated.
Model 02 for 0.2 -1.5 mm Ø
Model 03 for 0.3 - 4.0 mm Ø
Abfräsfix
Stripping machine with milling head for varnished wires
0.8 - 5.0 mm in diameter
Standing model or with flexible shaft. / HP
Hand-held stripping machine with steel wire brushes for varnished wires.
HP 30 for 0.15 - 2.0 mm Ø
Counter rotating brushes.
HP 35/P for 1.0 - 4.0 mm Ø
Brushes rotating in same direction
Available through:
SintroNex
146 Sandy Pond Road Lincoln MA 01773 Phone: 781-259-0342 Fax: 781-259-9102
e-mail: Web:
Specifications contained in this document are subject to change without notice