ClassicLine bodysafety shower without valve, wall mounted, exposed pipework

- showerarm ¾“ made of brass, chemical resistant powder coated, projection565 mm

- wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female

- high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining

- integrated automatic flow regulation50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure

- signfor body safety showeraccording to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm

- installation height 2335 mm (+/- 100 mm)

- according to DIN EN 15154-1:2006

- according to DIN 12899-3:2009 and ANSI Z358.1-2004

- DIN-DVGW tested and certificated

Manufacturer: B-SAFETY or equal

Article-No.:BR 071 075powder coated RED

BR 071 085 powder coated GREEN

Mounting-Instructions

For an installation in accordance with DIN EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.

ClassicLine bodysafety shower without valve, wall mounted

- showerarm ¾“ made of brass, chemical resistant powder coated, projection500 mm, water inlet ¾” male

- push-on rosette of polyamideto cover theinstallation

- high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining

- integrated automatic flow regulation50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure

- signfor body safety showeraccording to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm

- installation height 2335 mm (+/- 100 mm)

- according to DIN EN 15154-1:2006

- according to DIN 12899-3:2009 and ANSI Z358.1-2004

- DIN-DVGW tested and certificated

Manufacturer: B-SAFETY or equal

Article-No.:BR 072 075powder coated RED

BR 072 085 powder coated GREEN

Mounting-Instructions

For an installation in accordance with DIN EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.

ClassicLine bodysafety shower without valve, ceiling mounted, exposed pipework

- showerarm ¾“ made of brass, chemical resistant powder coated, total length600 mm

- ceiling flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female

- high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining

- integrated automatic flow regulation50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure

- signfor body safety showeraccording to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm

- installation height according to norms as listed below: lower edge of the shower headmust be 2200 mm (± 100 mm) height above floor level

- according to DIN EN 15154-1:2006

- according to DIN 12899-3:2009 and ANSI Z358.1-2004

- DIN-DVGW tested and certificated

Manufacturer: B-SAFETY or equal

Article-No.:BR 073 075powder coated RED

BR 073 085 powder coated GREEN

Mounting-Instructions

For an installation in accordance with DIN EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.

ClassicLine body safety shower without valve, ceiling mounted

- showerarm ¾“ made of brass, chemical resistant powder coated, total length545 mm, water inlet ¾” male

- push-on rosette of polyamideto cover theinstallation

- high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining

- integrated automatic flow regulation50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure

- signfor body safety showeraccording to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm

- installation height according to norms as listed below: lower edge of the shower headmust be 2200 mm (± 100 mm) height above floor level

- according to DIN EN 15154-1:2006

- according to DIN 12899-3:2009 and ANSI Z358.1-2004

- DIN-DVGW tested and certificated

Manufacturer: B-SAFETY or equal

Article-No.:BR 075 075powder coated RED

BR 075 085 powder coated GREEN

Mounting-Instructions

For an installation in accordance with DIN EN 15154-1:2006 it must be ensured, that the safety shower installation is self-draining between valve and shower head.