CUCURBIT FUNGICIDES (Labeled & Rates/A) as of JUN, 2009. T. A. Zitter, Dept. Plant Pathology, Cornell University, Ithaca, NY. Underlined are Registered in NYS for Agricultural Use; Group Nos. are from the Fungicide Resistance Action Committee and EPA
MSDS Number: A0446 * * * * * Effective Date: 02/01/07 * * * * * Supercedes: 05/20/04. 1. Product Identification. Synonyms: Dimethylketone; 2-propanone; dimethylketal CAS No.: 67-64-1 Molecular Weight: 58.08 Chemical Formula: (CH3)2CO Product Codes: J.T.
Press release. Medical injection molding seminar. Arburg medical technology event extremely well received in US / Exchange of experiences with experts. Lossburg. Almost 100 customers visited the Arburg Technology Center (ATC) Midwest in Elgin, Illinois.
Material Safety Data Sheet. Nutri-Root 2 2 3 Date of Issue: February 2014 Product No. 030-4103 (1.0 Gal.). 99 Blueberry Hill Rd. In Case of Emergency, CHEM-TEL 1-800-255-3924. Product information: 1-781-935-9070. Section 1: Product Identification. Product Trade Name: Nutri-Root.
FINAL ASSESSMENT REPORT. FOOD DERIVED FROM GLYPHOSATE-TOLERANT LUCERNE J101 AND J163. For Information on matters relating to this Assessment Report or the assessment process generally, please refer to. Executive Summary.
Explanatory notes. 1Legislation and references relevant to this unit standard include Health and Safety in Employment Act 1992; Resource Management Act 1991; Hazardous Substances and New Organisms Act 1996; available at AS/NZS 2311:2009 Guide to the painting.
Revised: 12/06 MATERIAL SAFETY DATA SHEET Replaces: 11/05. 18700 Southcenter Parkway GACO WESTERN 521 Biddle Street. Tukwila, WA 98188 Waukesha, WI 53186. CHEMICAL FAMILY: Polyurethane. TRADE NAME: Polyfoam. TRANSPORTATION EMERGENCY ASSISTANCE / CALL CHEMTREC / 1-800-424-9300. NFPA HAZARD RATINGS.
Production and use of nitrogen fertilisers Report for Defra project NT2601. Report for Defra Project NT2601. Production and use of. nitrogen fertilisers. Peter Dampney, ADAS Boxworth. Bill Basford, ADAS Gleadthorpe Grange. Gillian Goodlass, ADAS High Mowthorpe.
Brief Summary of New EPA Regulations for. Aluminum, Copper, and Other Nonferrous Foundries Area Sources. 40 CFR Part 63 Subpart ZZZZZZ. EPA has new requirements to reduce air pollution from aluminum, copper and other nonferrous (not iron or steel) foundries.
All chemicals were from Sigma-Aldrich (Oakville, ON, Canada), and used without any additional purification. All organic solvents were from Caledon labs (Georgetown, ON, Canada). BcMag DEAE magnetic beads were from Bioclone Inc. (San Diego, CA). Desalting.
Nanoimprint Lithography. Nanoimprint Lithography is a novel method of fabricating nanometer scale patterns. It is a simple process with low cost, high throughput and high resolution. It creases patterns by mechanical deformation of imprint resist and.
Sample Specification from Monoxivent Corrosion Composites. SECTION 15800 FIBERGLASS REINFORCED PLASTIC DUCTWORK. A. This Section of the Contract Specifications shall be read in conjunction with Section 15000 General Mechanical Clauses, which shall apply to and govern the work of this section.
Material Safety Data Sheet. Product Identification. Product ID:EPOCAST 169 A, FPC2114. MSDS Number: BSVBW. Company Name:Huntsman. Address:5121 SAN FERNANDO RD WEST. Info Phone Num:818-247-6210. Emergency Phone Num:818-247-6210; 800-888-8372. Composition/Information on Ingredients.
JOINT SEALants. LANL MASTER SPECIFICATION. When editing to suit project, author shall add job-specific requirements and delete only those portions that in no way apply to the activity (e.g., a component that does not apply). To seek a variance from applicable.
COAT-ALL APPLICATION INSTRUCTIONS. PRIMER INSTRUCTIONS. Surface Preparation: Surface must be clean and dry, free from all grease, wax, oil, polish, loose paint, dirt, rust or other contamination. Clean with a strong abrasive detergent, rinse well and.
ENTRANCE FLOOR MATS AND FRAMES. Section includes: Entrance floor mats and frames, including fibered roll good entrance systems. Related requirements. 1. Drawings and General Provisions of the Contract (including General and Supplementary Conditions and Division 1 References Section).