Card/Device Design Review Form
Product Design Information Required (Attached by Vendor)

Card/Device Design Review Form

Card / Device Design Review – Part 1
(Vendor to Complete)
Vendor Company Legal Name
Product Technical Name and Version
Product Commercial Name and Version
Product Name and Version used for CAST registration
Proposed Usage Scenarios and Geographies(Context / Environment of use)
(indicate any specific or intended sales markets e.g. US only, Global or specific customer requirement)
(continue on separate sheet if required) / No of additional sheets
SpecificCard/Device features requiring Design Review (continue on separate sheet if required) / No of additional sheets

Product Design Information Required (Attached by Vendor)

Please attach appropriate diagrams or documentation including:

  • External design including dimensions
  • Layout of branding (does not need to show final branding as this may be customer specific)
  • Internal component layout including the position of the chip
  • Antenna layout including dimensions
  • Method ofPayPass chip personalization required for the card/device
  • Any special instructions on the use of the card/device that may be required by the end-user (cardholder)

The information submitted must be as complete as possible including details of any associated equipment or accessories that may typically be included with the PayPass product including; key rings, wallets or protective sleeves, etc

Part 2 – Completed by MasterCard
Date Received / Date Reviewed / Design Reference
Date Returned
PayPass Design Reference # / Card/Device Design Check List / Design Review
Does the product design meet the requirement?
Note to Reviewer: Indicate whether the design meets the requirement, if it does not; reference the implementation guideline requirement or recommendation that is not being met.
PP DR C1 / Will a merchant be able to recognize the device as PayPass from the exterior design?
PP DR C2 / How will the cardholder be verified?
PP DR C3 / Is a signature panel being used?
PP DR C4 / How will the PayPass device be personalized?
PP DR C5 / Card layout, preventing damage to the chip or antenna
PP DR C6 / PayPass Branding Requirements
PP DR C7 / Metallic / Conductive finishes
PP DR C8 / How to uniquely identify a device as owned by a particular cardholder from any other similar PayPass device (account number, serial number, etc)?
PP DR C9 / Can devices easily support the ‘Tap and Go’ approach to conducting a PayPass transaction?
PP DR C10 / Based on experience and knowledge will the design be easily usable with all current designs of PayPass terminals/readers? What is likely to be the way the device will be presented to a reader/terminal?
PP DR C11 / Is the design impacted by any known patents?
© 2009 MasterCard / 1
Version 2.0 - May 2009