Body Shower Without Valve, Wall Mounted, Exposed Pipework
ClassicLine body safety shower with eye shower, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- eye shower with two spray heads 45°
- big push plate made of steel, length 130 mm, chemical resistant green powder coated, with large signal "PUSH", luminescent according to DIN 67510
- ball valve ½” made of stainless steel, DIN-DVGW tested and certificated
- high-performance spray heads made of brass 45°, for large-scale dispersion of water, chemical resistant green powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation 14 litre / minute
- connecting pipe ½” made of brass, chemical resistant green powder coated, length 100 mm
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
- DIN-DVGW tested and certificated
Manufacturer: B-SAFETY or equal
Article-No.: BR 861 075 powder coated RED
BR 861 085 powder coated GREEN
ClassicLine body safety shower with hand-held eye shower, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- hand-held eye shower with one spray head 45°, wall mounted
- water-bearing parts made of brass
- handle with integrated, adjusting activation made of plastic, valve not self-closing
- high-performance spray head made of brass, 45° angled, for large-scale dispersion of water, chemical resistant powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation 7 litre / minute
- integrated backflow preventer
- stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
- robust wall mounting bracket with positioning of the shower
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
- DIN-DVGW tested and certificated
Manufacturer: B-SAFETY or equal
Article-No.: BR 863 075 powder coated RED
BR 863 085 powder coated GREEN
ClassicLine body safety shower with hand-held eye shower, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- hand-held eye shower with two spray heads 45°, wall mounted
- water-bearing parts made of brass
- handle with integrated, adjusting activation made of plastic, valve not self-closing
- high-performance spray heads made of brass, 45° angled, for large-scale dispersion of water, chemical resistant powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation 14 litre / minute
- integrated backflow preventer
- stainless steel covered hose, length 1.5 meter, water inlet ½” female, DIN-DVGW tested and certificated
- robust wall mounting bracket with positioning of the shower
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
- DIN-DVGW tested and certificated
Manufacturer: B-SAFETY or equal
Article-No.: BR 864 075 powder coated RED
BR 864 085 powder coated GREEN
ClassicLine body safety shower with eye-/face wash unit with bowl, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- eye-/face wash unit with bowl
- body and bowl made of UV and impact resistant ABS plastic
- activation by pressing the big push plate made of stainless steel
- high-performance spray heads made of brass, for large-scale dispersion of water, chemical resistant powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation valve
- water inlet 3/8” male, water outlet 1 1/2” male
- height 235 mm, width 445 mm, depth 300 mm
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
Manufacturer: B-SAFETY or equal
Article-No.: BR 866 075 powder coated RED
BR 866 085 powder coated GREEN
ClassicLine body safety shower with eye shower with bowl, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- eye shower with two spray heads and stainless steel bowl
- big push plate made of steel, length 240 mm, chemical resistant green powder coated, with large signal "PUSH", luminescent according to DIN 67510
- ball valve ½” made of stainless steel, DIN-DVGW tested and certificated
- high-performance spray heads made of brass 45°, for large-scale dispersion of water, chemical resistant green powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation 16 litre / minute
- bowl made of stainless steel, diameter 275 mm, chemical resistant powder coated, water outlet 1 ¼” male
- connecting pipe ½” made of brass, chemical resistant green powder coated, length 100 mm
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
- DIN-DVGW tested and certificated
Manufacturer: B-SAFETY or equal
Article-No.: BR 867 075 powder coated RED
BR 867 085 powder coated GREEN
ClassicLine body safety shower with eye-/face wash unit with bowl and lid, wall mounted, exposed pipework
- shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm
- two wall flanges ¾” made of brass, chemical resistant powder coated, with top water inlet ¾” female and bottom water inlet ¾” female for mounting in circulating water taps
- incl. plug ¾” for flange made of stainless steel
- ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated
- pull rod made of steel, chemical resistant powder coated, length 700 mm
- high-performance shower head made of chemical resistant plastic, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining
- integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure
- eye-/face wash unit with bowl and lid
- body, lid and bowl made of UV and impact resistant ABS plastic
- activation by pulling down the lid
- high-performance spray heads made of brass, for large-scale dispersion of water, chemical resistant powder coated, largely scale-free, with rubber sleeves and sealed dust caps
- integrated flow regulation valve
- water inlet 3/8” male, water outlet 1 1/2” male
- height 205 mm, width 355 mm, depth 305 mm
- sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- sign for eye shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm
- according to DIN EN 15154-1:2006 and DIN EN 15154-2:2006
- according to ANSI Z358.1-2004 and DIN 12899-3:2009
Manufacturer: B-SAFETY or equal
Article-No.: BR 868 075 powder coated RED
BR 868 085 powder coated GREEN