1. Benefits of True Temper’s Performance Fitting Center Program include:
  2. First to market on select new product launches
  3. Preferred pricing on catalog products
  4. Loyalty Rebate program
  5. Exclusive access to ShaftFit PRO fitting software
  6. All of the Above
  1. True Temper’s Steel Manufacturing process is driven by?
  1. Materials
  2. Process
  3. Design
  4. All of the above
  1. Steel golf shafts constructed with variable wall thickness is an indication of?
  2. Premium golf shaft design
  3. Advanced manufacturing capabilities
  4. Value golf shaft design
  5. Both A and B
  1. Shafts without variable wall thickness (like all KBS branded shafts) can cause clubmakers difficulty hitting new standard swingweights due to lack of mass in the tip section?
  2. True
  3. False
  4. What are the Gold Manufacturing Tolerances?
  5. Weight
  6. Length
  7. Butt Diameter
  8. Tip Diameter
  1. True Temper’s Gold Manufacturing Tolerances are applied to every premium True Temper branded shaft?
  2. True
  3. False
  1. Continuing on with the theme of Gold Manufacturing Tolerances, Sub-flex within a standard flex range further defines relative stiffness options?
  2. True
  3. False
  1. Define the difference between Descending Weight and Constant Weight golf shafts
  1. Dynamic Gold Spinner has unique design characteristics that provide the following performance attributes:
  2. Produces increased spin during full and low impact swings
  3. Generates lower launch conditions than standard Dynamic Gold
  4. Creates a steeper angle of decent for greater stopping power
  5. All of the above
  1. Dynamic Gold SL offers the same ball flight characteristics as the Original Dynamic Gold but at 20% less weight?
  2. True
  3. False
  4. Dynalite Gold XP can best be defined by the following characteristics:
  5. Mid Weight
  6. High Launch
  7. Moderate Spin
  8. All of the above
  1. All True Temper GS Series shafts have finished weights under 100g?
  2. True
  3. False
  1. Project X Steel utilizes a unique taper rate for each and every iron in the bag?
  2. True
  3. False
  4. Project X 95 Flighted is unique when compared to Project X due to the following design differences:
  5. Descending weight versus constant weight
  6. Shorter parallel tip section
  7. Longer parallel tip section
  8. Both A and C
  9. Project X PXi iron shaft has improved feel over the original Project X primary due to what?
  10. Lighter weight
  11. Optimized butt to tip stiffness ratio
  12. Tour caliber spin control
  13. None of the above
  1. Dynamic Gold Tour Issue takes the Gold Manufacturing principle to a whole new level by focusing on what tolerance?
  2. Frequency
  3. Weight
  4. Both of the above
  1. Tour Concept Irons customize ball flight in what group of irons?
  2. Long
  3. Mid
  4. Short
  5. All of the above
  1. The new Speed Step 95 shaft is a perfect replacement for today’s OEM stock game improvement shaft options?
  2. True
  3. False
  1. The Rifle Blanks are the most versatile steel shafts on the market and are ideal for Custom Clubmakers for?
  2. Weight sorting sets
  3. Frequency matching sets
  4. Customizing ball flight
  5. Both B and C
  1. What is the equivalent Project X stiffness to a Dynamic Gold S300?
  2. 5.0
  3. 5.5
  4. 6.0
  5. 6.5
  1. The process of graphiteshaft manufacturing can best be summarized by rolling flags of graphite prepreg onto a steel mandrel using a computer controlled positioning table?
  2. True
  3. False
  1. The principle elements of graphite shaft design include:
  2. Composite Materials
  3. Fiber
  4. Flag Patterns
  5. Tooling
  6. All of the above
  1. Graphite shaft characteristics that have to be controlled include:
  2. Bend profile
  3. Shape
  4. Straightness
  5. All of the above
  1. Define Bend Profile as it relates to a graphite golf shaft :
  1. The primary playability role of Stability as it relates to a graphite shaft is?
  2. Control
  3. Feel
  4. Energy Transfer
  5. None of the above
  1. In regards to graphite shaft weight, a shaft that is too heavy for a player can lower his/her launch angle?
  2. True
  3. False
  1. Of all the Graphite Shaft Characteristics, which is the most difficult to test for and control?
  2. Torque
  3. Stability
  4. Feel
  5. None of the above
  6. Booyah is the lightest Grafalloy shaft in the lineup featuring what type of performance characteristics?
  7. High Launch
  8. Mid Launch
  9. High Spin
  10. Both A and C
  1. SpeedCoat Technology is found on the inside or outside of the shaft?
  2. Inside
  3. Outside
  4. Both inside and outside
  1. ProLaunch Red utilizes MircoMesh tip Technology to control?
  2. Tip Stiffness
  3. Stability
  4. Spin Control
  5. All of the above
  1. ProLaunch Blue is a high launch, low torque, low spin design for stronger players?
  2. True
  3. False
  1. List the Project X graphite wood shafts in order of heaviest to lightest using 5 for heaviest and 1 for lightest:

Project X Blue Tour Issue 7A3

Project X PXv Tour 52 5.5

Project X Black Tour Issue 6.0

Project X PXv 39 6.5

Project X Black (retail 6.0)

  1. Indicate the type of trajectory for each of the following Grafalloy products featuring SpeedcoatTechnology:

ProLaunch Red SC

ProLaunch Blue SC

  1. The new Grafalloy Blue shaft differs from the original how?
  2. It is heavier than the original
  3. It utilizes the highest grade aerospace material
  4. It incorporates SpeedCoat Technology
  5. Both B and C
  6. All of the above
  1. The Grafalloy Tour is a more tip stiff version of the ProLite 35 resulting in even lower launch and spin?
  2. True
  3. False
  1. The PFC Series of Wood shafts provide what type of ball flight?

PFC 50

PFC 60

  1. When fitting with Project X Hybrids, you should use the same FCM value for hybrids that the player is using in his Project X Steel irons?
  2. True
  3. False
  1. Project X Tour Issue Graphite was designed to complement the playing characteristics of Project X Iron shafts by focusing on which design elements?
  2. Firmer butt section to minimize shaft ovalization
  3. Constant taper mid section for optimal loading, unloading and energy transfer
  4. Reinforced tip section to minimize shaft droop and lag while reducing back spin
  5. All of the above
  1. Frequency Coefficient Matching is a numerical method for precisely measuring and defining the flex of a golf shaft?
  2. True
  3. False
  1. List the four factors that affect shaft flex that cannot be determined through weight sorting:
  2. Factor
  3. Factor
  4. Factor
  5. Factor
  1. Rifle Blanks are available in what frequencies?
  2. 4.0, 5.0, 6.0 and 7.0
  3. 3.0, 4.0, 5.0 and 6.0
  4. 4.5, 5.5, 6.5, and 7.5
  1. List the golf club standards for the Rifle Blank System:

Swing Weight

Tip to Ground

Club Length

  1. What is the standard slope gradient for the Rifle Blank System:
  2. 4.00 CPM
  3. 4.25 CPM
  4. 4.50 CPM
  1. What is the Butt Clamp length for testing the finished club frequency when using Rifle blanks?
  2. 2.5”
  3. 4.0”
  4. 5.0”
  5. All of the above
  1. The frequency calculator is an electronic tool that allows the clubmaker to calculate tip trimming recommendations for the entire Rifle Blank System using any completed club specification?
  2. True
  3. False
  1. What is the factory tip trimming recommendation using the XL Rifle Frequency Calculator for a 5 iron with a 6.0 frequency goal assuming the club was built to factory standards?
  2. 3 ½
  3. 5
  4. 4 ½
  5. None of the above
  6. When using the Rifle Blank System and working with the Rifle XL Frequency Calculator, the clubmaker is able to do the following regarding custom club fitting:
  7. Create a flighted set of golf clubs
  8. Increase the launch angle and spin rate for a set of golf clubs
  9. Reduce the launch angle and spin rate for a set of golf clubs
  10. All of the above
  1. ShaftFit PRO is the only dealer based shaft fitting software provided by shaft manufacturers that uses real launch monitor data to analyze current equipment and recommend shafts for improving distance and/or accuracy?
  2. True
  3. False
  1. Benefits of ShaftFit PRO include:
  2. Access to sophisticated shaft recommendations
  3. Creating a customer database
  4. Track fitting history
  5. Generate Professional Fitting Reports
  6. All of the above
  1. ShaftFit PRO can be used to determine shaft recommendations for which clubs?
  2. Drivers
  3. Fairway Woods
  4. Irons
  5. Hybrids
  6. All of the Above