Specification Section 34 75 13
Tymetal TFB-120 Shallow Mount Fixed Bollard /

PART 1 - GENERAL:

1.01SECTION INCLUDES:

A.This section covers the furnishingand surface installation of a TFB-120 Bollard system. Provide complete system that has been fabricated and tested for proper operation at the factory.

B.TFB-120 system includes fixed bollards and fully welded sub-frame.

C.Design and materials are identical to those used in crash test of the TFB-120 system and approved by testing facility to ASTM F2656 07 M50 standards.

1.02RELATED SECTIONS:

A.Section 28 00 00 – Electronic Safety and Security

B.Section 32 31 00 Fencing and Gates

1.03CRASH RATING, TESTING AND QUALITY ASSURANCE:

A.The TFB-120shallow mount bollardisASTM F2656 07 M50 certified (equivalent to Department of State (DOS) K12 as per publication SDSTD02.01, Revision A, dated March 2003) for Vehicle Crash Testing of Perimeter Barriers and Gates, in which the impact conditions are:

Crash RatingVehicle Weight Impact Speed

ASTM F2656 0715,000 lbs 50 MPH

Note: The TFB-120vehicle barrier system must be installed per manufacturer’s specifications and designs. Failure to comply with all installation requirements will void the Crash Rating and Warranty.

B.The TFB-120 vehicle barrier system has successfully passed an actual crash test. A copy of the official letter of compliance from the testing facility can be provided upon request.

C.Manufacturer shall be a company specializing in the supply of security vehicle barriers.

1.04SUBMITTALS:

A.Submit shop drawings of standard product.

B.Indicate pertinent dimensions, general construction, component connections and location, anchorage methods and location, hardware, and installation details.

1.05DELIVERY, STORAGE AND HANDLING:

A.Deliver material to job site in manufacturer’s packaging undamaged, compete with installation instructions.

B.Store off ground, under cover, protected from weather and construction activities.

1.06PROJECT – SITE CONDITIONS:

A.Install TFB-120Bollard, including excavation, trenching and concrete foundation per manufacturer’s printed instructions.

B.Installer/owner to supply required permits/inspections.

1.07WARRANTY:

A.Three (3) years from date of shipment on manufactured components and workmanship.This warranty excludes normal wear on finishes or damage that occurs due to impact, abuse, misuse or acts of God.

B.Accessories are covered by their manufacturer’s warranty.

C.Warranty is in lieu of all other warranties, expressed or implied, and shall be considered void if visible evidence implies recommended installation procedures and maintenance instructions were not followed.

PART 2 - PRODUCT:

2.01Barrier system MANUFACTURER:

A.The TFB-120vehicle barrier systems shall be manufactured to Tymetal Corp. specifications and shall be supplied by Tymetal Corp., 2549State Route 40, Greenwich, NY 12834 (800) 328 4283.

B.Approved substitution – All other systems must be submitted to the design team in accordance with substitution requirements as set forth in the general provisions of the specification manual for approval prior to the bid date. Products submitted after the bid date will not be approved.

2.02Vehicle BARRIER:

A.Models TFB-120 (fixed bollard) shallow foundation vehicle barrier systems are designed to withstand the impact of a 15,000 pound vehicle travelling at 50 mph. The bollard is constructed of 10” diameter schedule 80 steel pipe. Standard overall height of the bollard is not less than 36” above ground. A shallow foundation of 16” is used for a total depth of construction, reducing the possibility of utility interference and reducing the cost of installation. The TFB-120 bollard system can be installed separately or in groups and are easily adaptable to changing grades.

B.Mechanical Components:

  1. Bollard: Constructed from 10”diameter schedule 80 steel pipe.
  2. Sub-frame: Constructed from channel steel, fully welded
  3. TFB-120 style bollard is welded to the sub-frame.

C.Finishes:

  1. Bollards are delivered with zinc rich primer coating and three part epoxy paint – Standard color for the TFB-120 unit is yellow. Other colors available.
  2. Bollard may have a decorative cover of cast aluminum or stainless steel material. Covers are an option and not included as standard equipment with the bollard.

D.Factory Inspection:

  1. Manufacturer shall inspect each bollard at factory to assure conformance to specification.

PART 3 - EXECUTION:

3.01Site Inspection:

A.Examine final grades and installation conditions.

B.Installer must examine the location and advise the Contractor/Owner of any site conditions unacceptable for proper installation of product. The conditions include but are not limited to the following:

  1. Existing underground utilities or unforeseen issues.
  2. Removal of pavers, stones road surfaces or landscaping.

C.Do not begin work until all unsatisfactory conditions are corrected.

3.02Installation:

A.Install equipment of this section in strict accordance with the company’s printed instructions.

B.Set units level and plumb and in line with adjacent structures or roadway. Anchor securely into place.

C.Use installers with experience in the installation of vehicle barriers. For a list of qualified installers please contact manufacturer.

3.03System Acceptance & validation:

A.Acceptance Test:

  1. Installer shall describe maintenance procedures as outlined in the installation manual.

B.System Validation:

  1. Installer and customer shall complete Post Installation Check Off Sheet

Note: Tymetal Corp. reserves the right to modify and/or make changes as deemed necessary without previous notice.

TYM_TFB-120 Bollard_R0Page 1 of 312/31/12