Available from UK Distributor : Hi-Port Telecom Tel : 023 92 552855 Feb 11 Page 1

ProfiTrace 2 – Comprehensive PROFIBUS Analyzer /
/ Introduction
Procentec ProfiTrace 2 is the most powerful analyzer for PROFIBUS networks. The very latest generation in bus monitoring technology, combining all primary tools :-
Analyzer, Oscilloscope, Bar graph, Topology Scan and DP-V0/V1 Master.
Technicians can check and troubleshoot a complete PROFIBUS network with 1 software package and only 1 piece of hardware - an enormous reduction in test equipment weight, cost and required knowledge over previous kit.
An advanced PROFIBUS to USB hardware adapter, ProfiCore Ultra, is used to capture bus signals running at up to 12 Mbps and is equipped with high speed digital oscilloscope circuits for display of waveform details on an attached computer.
A ProfiTrace 2 software set on your computer, connected to a PROFIBUS network through a ProfiCore Ultra adapter, provides an essential tool for maintenance, commissioning and troubleshooting as well as product development. The classical failures such as noise, reflections, voltage drops, termination problems, double addresses, wire breaks and configuration faults are easily identified. Random errors such as overshoots, error telegrams, repeats and diagnostic messages can also be captured and logged. The results can also be exported to detailed reports which are accepted by the industry. Predictive maintenance and asset management are now really possible!
This outstanding tool that fits in your pocket will boost the limits and capabilities of all PROFIBUS service, maintenance and engineering technicians.
ProfiTrace 2 software and an essential ProfiCore Ultra adapter is normally supplied in one of two Troubleshooting Toolkit sets. These include the useful Tap Connector lead, USB leads, software CD and User Handbook, all in a robust plastic carrying case, as in photo. All components may be purchased individually, if required. See below for further details, including software licence options. /
Product features
/ Analyzer with powerful statistics
Enhanced version of ProfiTrace 1: Live list display and message detail log showing Repeats, Fall-outs, Corrupted messages, Diagnostics, Cycle time, etc.
/ High speed digital oscilloscope
Differential voltage, A-line, B-line, Noise, Overshoots, Reflections, Triggers
/ Bar graphs
Average, Min. and Max. values of the bus signals from all connected devices
/ Topology scan
Automatic generation of network diagram showing cable lengths
/ Reporting
Automatic generation of detailed reports that are accepted by the industry
/ DP-V0/V1 master
ProfiCaptain has been completely integrated with even more features
/ ProfiCore Ultra USB interface
Useable on PC platforms, no power supply required and elimination of spur lines
/ DP and PA
The PA Probe Ultra allows direct measurements on PA segments
/ 9,6 kbps to 12 Mbps.
/ Works on Windows 7, Windows XP and Vista platforms
Analyzer features
Intelligent real-time Live List
• Colour coded indication of detected device status
• Powerful statistical listings for most errors : repeats, station lost, etc.
• Advice & warnings : Ident number mismatch, Watchdog not set, Illegal configuration
• Last diagnostic, parameter, configuration and data-exchange message details
• GSD file management for product and diagnostic identification
Intelligent message sampler
• Visualization of FDL, DP, DP-V1, DP-V2, PA and I&M messages
• Messages can be filtered and stored
• Data interpretation of bytes, words, floating points, etc.
• Error detection
• Bookmarks
/ /

ScopeWare features

/ / • Time scale: 50 ns to 500 ms.
• Voltage scale: 0.5 to 5 V per Div.
• Cursor measurement lines (voltage and time)
• Differential (B-A) and single ended (A and/or B line) measurements
• Free running or trigger per device
• Trigger features: start of response or request message
• Dual trace format for PROFIBUS PA signal and power

Bargraph features

/ / • Shows driver voltages for all connected devices
• Average, Minimum and Maximum signal levels per device
• Colour indication of the signal quality
• Continuously updated

Master features
• Complete integration of ProfiCaptain
• Connect as Secondary Master or as the only Master
• I/O testing with automatic patterns to slaves
• Automatic detection of existing bus parameters
• Brand new concept of 'stealing' slaves
• Class 2 functions in a Class 1 framework
• No shutdowns when updating the configuration
• Deactivating slaves in the configuration
/ /
Topology Scan
• Automatic assessment and drawing of network topology diagrams
• No shutdown required
• No disturbance in the cycle time
• Works on 500 kbps and 1.5 Mbps networks
• Used on passive networks in conjunction with ProfiCaptain /

ProfiCore Ultra Features
PROFIBUS to USB Adapter
• PROFIBUS maximum baudrate 12 Mbps.
• Galvanic isolated PROFIBUS Interface.
• Latest RS 485 technology.
• Only minimal network loading or disturbance.
Oscilloscope
• Frequency: 192 MHz
• Bandwith: 100 MHz
• Differential measurement: -9 to +9 V • Single ended: -4.5 to +8 V
• Dual trace format for PROFIBUS PA signal and power
Other Aspects
• High speed USB 2.0 interface •. External power supply possible if required
• External oscilloscope trigger port.

Products / Order code / Description

ProfiTrace 2 / 30020 / • ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
(no Oscilloscope, Topology or Bargraph functions)

Troubleshooting
Toolkit Ultra Plus / 37021 / • ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
• ScopeWare software (incl. Bargraph)
• Tap Connector 2
• Topology Scan Software
• Blue carrying case

Troubleshooting
Toolkit Ultra Pro Plus / 38022 / • ProfiCore Ultra, with USB cable
• ProfiTrace 2 software (incl. Report)
• ScopeWare software (incl. Bargraph)
• Tap Connector 2
• Topology Scan Software
• Blue carrying case
• PA Probe Ultra + NEW OPC Server s/w
• ProfiCaptain 2 software
OPC Server s/w / 101-00231B / • Upgrade current software licence to add extra capabilities
CommDTM driver / 101-00241A / • Parameterization of DP and PA devices