Submission text
Automatic sliding door installation - hermetic
Gilgen automatic sliding door installation - hermetic
Gilgen automatic sliding door installation, TÜV-tested for conformity with EN 16005 and DIN 18650.
Gilgen SLX-D sliding door drive unit in combination with hermetic sliding door leaf.
Gilgen sealing profile system for areas where hygiene and other sensitive considerations are a priority.
The tested overall system conforms to the air permeability requirements of EN 12207 and EN 16361.
Elegant integration, into the sliding door drive unit, of all actuating and sensor components.
An electronic control unit with an automatic reversing and stopping mechanism provides gap-hazard detection.
Suitable for connection via a BUS configuration or conventional wiring system.
The swivel mechanism integrated into the drive system causes the sliding leaf to drop when closing, thereby pushing it tightly against the frame.
Noise-insulated/vibration-damped drive system.
Low-noise toothed belt. Running carriage with counter-pressure rollers, height/depth-adjustable
Drive case height 180 mm, or 140 mm in visible configuration
Drive case covering
With rounded edges for easy cleaning. Hinge-type aluminium drive unit casing designed for easy service and maintenance access, with mechanical hold-open system and drop prevention.
Single door leaf
Height of overall structural opening (mm): ……….
Width of overall structural opening (mm): ……….
All-round aluminium profile frame with colourless anodised finish and sealing elements
( )Foam-material leaf core with FORMICA surface, colour ………….
( )Foam-material leaf core with CNS surface
Optional:
( ) with 1 mm lead insert
( ) with 2 mm lead insert
( ) with 3 mm lead insert
( ) with flush-fitting window
( )Foam-material leaf core, sound-insulated up to 37 dB, with FORMICA surface, colour ………….
( )Foam-material leaf core, sound-insulated up to 37 dB, with CNS surface
Optional:
( ) with flush-fitting window
( )HDF sandwich-panel-filled leaf core with HPL surface, colour ………….
( )EPS sandwich-panel-filled leaf core with CNS surface
Optional:
( ) with flush-fitting window
( )Door leaf filling glazed, IV-ESG (insulated-tempered safety glass)
( )Door leaf filling glazed, IV-VSG (insulated-laminated safety glass)
( )Door leaf filling matt-glazed, IV-VSG (insulated-laminated safety glass)
Optional:
( )Handle (complete, inside and outside)
The handle permits emergency manual opening of the door in the event of power failure, even if there are
differences in pressure.
Surface treatment of drive case shell
( ) Powder-coated in RAL colours: …..
( )Powder-coated in NCS colours: …..
( )Aluminium, natural anodised finish E6/EV1
( )Aluminium, coloured anodised finish. Colour code: …..
Bottom guideway
Lateral fixed-point guides
Frames
( )Single frame, three-sided
Inside: Aluminium profile with colourless anodised finish
( )Double Frame, three-sided
Inside and outside: Aluminium profile with colourless anodised finish
Wall thickness: …. mm, covered with aluminium sheet in colourless anodised finish
Drive/control system options
( )Emergency operating mode
If the power supply fails, batteries ensure operation for a further 30 to 60 minutes. The system continuously monitors the battery's charge level to ensure that it will work in an emergency. The final door movement (opening or closing) in the event of low charge state can be programmed.
( )Locking mechanism
( )Automatic running-carriage locking system housed in drive case
Optional:
( )Monitoring of the door leaf position and lock status TUWE (VdS), e.g. for connection to an alarm system.
( ) Manual internal release mechanism designed for installation in the frame profile, in a surface-type/flush-type box
( ) Manual internal release mechanism for installation in/on the side of the drive case.
The customisable draw-bar length allows you to set an ideal operating height for barrier-free access.
( ) Lockable manual release from the outside for situations where there is no other access to the room.
Additional control elements
( )Voltage-free outputs for acknowledgements to, for example, the building management system (via interface PCB)
( ) Interlock operation between two Gilgen automatic door systems, programmable special functions (e.g. for wind
protection in porch areas). The interlock function can be activated automatically or manually in controlled
configuration or as a wind-protected porch system.
Sensor system and user protection
( )SAFESCAN-PI, integrated safety sensor fitted inside the drive case.
Scanning safety barrier for reliable monitoring of the closing movement.
( )SAFESCAN-PI, integrated safety sensor fitted inside the drive case.
Scanning safety barrier for reliable monitoring of the secondary closing edge(s) during opening.
Operating controls
( )Permanently installed D-BEDiX program selector key
For easy selection of door function, and for displaying various items of system information
( )Flush installation (using customer’s flush-type box)
( )Surface installation (with surface-type plastic frame, in white)
( )BEDiX remote radio control with illuminated LCD display, for selecting the door functions, adjusting the door parameters and displaying the operating data.
Incl. wall bracket
( )KOMBI-D-BEDiX with key cylinder for blocking the selected operating mode
Program selector key with illuminated LCD display, for selecting the door functions, adjusting the door parameters and displaying the operating data.
( )Flush installation in twin box (depth 1 ½)
( )Surface installation (with surface-type plastic frame, 2X, in white)
Control/actuation elements
( )Contactless ATC push-button for optimum hygienic operation
( )OPEN push-button, white, from Feller EDIZIOdue
( )OPEN push-button, green-lit, from Feller EDIZIOdue
( )EMERGENCY OPEN push-button, green-lit, with “emergency exit” symbol
( )Key-operated OPEN impulse switch (pivoting switch)