Application by Transferor for Transfer of Registration as a Generator in the NEM

Please read the ‘NEM Generator Transfer Guide’when completing this Application

Please return the completed application to:

Australian Energy Market Operator Ltd

Registration Desk

Level 2, 20 Bond St

Sydney NSW 2000

Postal Address:
GPO Box 2008
Melbourne VIC 3001

This form should not be altered without the prior consent of AEMO.

Table of Contents

SECTION A.APPLICATION FOR TRANSFER OF REGISTRATION

A.1Transferor Details

A.2Transferee Details

A.3Transferor Declaration

SECTION B.TRANSFEROR CONTACT DETAILS

B.1Contact Details for Head Office

B.2Details of Relevant Personal Contacts

SECTION C.METERING

ATTACHMENT 1 – CONNECTION POINT CHECKLIST

Application by Transferor for Transfer of Registration as a Generator in the NEM

August 20161

SECTION A.APPLICATION FOR TRANSFER OF REGISTRATION

A.1Transferor Details

Transferor:………………………………………………………………………………………………

(full name, eg The First Energy Company Pty Ltd (trading as Energy First))

ABN:…………………………………………………………………………………………………

The Transferor is applying to transfer its registration in respect of the following facilities to the Transferee:

Facility name
Address
Unit ID. / Nameplate Rating / MW
Maximum Capacity / MW
Commissioned / Yes
Not yet / Expected Commissioning Date: / / /
Category / MarketNon-Market
Scheduled
Semi - Scheduled
Non Scheduled ‡

Add more detail as required

Transferor’s association with the facilities was (tick one or more):

Owner

Controller

Operator

Intermediary

A.2Transferee Details

The Transferor wishes to transfer the facilities to the following persons who have applied to register as the Transferee:

Transferee
(full name and ABN) / Association with the facility
(owner, controller and/or operator)

A.3Transferor Declaration

I ………………………………………………………………………………………………………..

(insert name)

…………………………………………………………………………………………………………

(insert title)

DECLAREthat I am authorised by the Transferor to submit this Application on the Transferor’s behalf, and certify that the contents of this Application and any further submission are true and correct and that the Transferor is not in breach of any of its obligations under the Rules with respect to the facilities.

…………………………………………………………………………………. / ……/……/20……
Signature / Date

SECTION B.TRANSFEROR CONTACT DETAILS

B.1Contact Details for Head Office

Please provide the following details for the Head Office and any Branch Office/s:

Office name*
Street address
State / Postcode
Postal address
State / Postcode
Phone / Fax
Email

* Type “Head Office” or name of branch

B.2Details of Relevant Personal Contacts

For each relevant personal contact within the Transferor organisation, please provide details for the following contacts. (Note: A person may be nominated for more than one role.)

Chairperson / NEM Primary Contact
Company Secretary / Registration Contact
Head of Organisation (MD/CEO)
Contact Type (see above)
Name (e.g. Dr George William Smith)
Position / Branch
Phone / Fax
Mobile / Email

The Transferor must submit additional pages to include all relevant contact details. Please clearly mark these as ‘Attachment to Section B’ and number each page consecutively.

SECTION C.METERING

Where the Transferor is a Market Generator, please answer the following:

Has the metering installation changed since you registered the facility in the NEM?
(If unsure, tick Yes)

No
I confirm that the metering installation at the facility is unchanged, and I provide the following details:

MeteringINSTALLATION DETAILS
Connection Point NMI(s):
Date of last metering installation test: / ___/___/______
Copy of valid meteringinstallationtest report: / ☐- Attached

If the meteringinstallationtesting occurred over a period of time please specify the date each piece of the metering equipment was tested and identify each piece of equipment (eg Meter, CT, VT).

Yes
Please provide a completed Connection Point Checklist, using Attachment 1

ATTACHMENT 1 –CONNECTION POINT CHECKLIST

1.Checklist
Market Registration for: / ______
Site Introduction: / ______
GENERAL and TECHNICAL DETAILS
Applicant details / Company Name:
Participant ID:
Contact Name:
Phone No:
Email:
Postal Address:
Expected Commissioning Date / ___/___/______
Connection Point NMI(s):
Logical NMI – Algorithm / ☐Yes ☐No
(If Yes, provide details - ☐Attached)
Transmission Node Id (TNI):
If Generator is connected to the Distribution Network provide Transmission NMI(s):
Single Line (Schematic) drawing of the Connection Point showing installation details. / Drawing number ______
☐- Attached
Detailed Wiring diagram of the Metering Installation / Drawing number ______
☐- Attached
Distribution or transmission area drawing showing Connection Point relativity. / Drawing number ______
☐- Attached
Responsible Person for Connection Point / Name:
Telephone:
Email:
Physical Address of Connection Point
Physical Location of Connection Point
If Generator >10MW, and connected to the Distribution Network approval for site specific Distribution Loss Factor from the Australian Energy Regulator (AER). / DLF Code:
DLF Value:
Approval Letter / ☐- Attached
Feeder Capacity / ______MVA or / ______Amps
Transformer Capacity / ______MVA
Generator Capacity / ______MVA / ______MW / ______pf
Annual Energy Generation / ______MWh
Metering Installation Type (S7.2.3)
Participant Relationships In MSATS / Role Id / Participant ID / Participant Name
FRMP:
LNSP:
LR:
MDP / MPC:
MPB:
RP:
ROLR:

cont…

REVENUE METERING INSTALLATION DETAILS:
Meter Details:
Metering Installation Type (S7.2.3): / Type: ______
Meter Serial No. / Meter Make & Model / Pattern Approval Cert No. / Meter Class Accuracy / Is Meter Bi-Directional / Current Rating / Meter Test Results
☐Yes ☐No / ____ Amps / ☐Attached
☐Yes ☐No / ____ Amps / ☐Attached
Current Transformer (CT) Details:
CT Serial No.: / CT Ratio’s Available: / CT Connected Ratio:: / CT Burden (Rated):: / CT Class: / CT Test Results:
______VA / ☐Attached
______VA / ☐Attached
______VA / ☐Attached
Voltage Transformer (VT) Details:
VT Arrangement:: / ☐3 x 1Ph VT or ☐3Ph VT
VT Serial No.: / VT Ratio: / VT Burden (Rated):: / VT Class: / VT Test Results:
_____KV / ___V / ______VA / ☐Attached
_____KV / ___V / ______VA / ☐Attached
_____KV / ___V / ______VA / ☐Attached

cont…

CHECK METERING INSTALLATION DETAILS:
☐Check Metering Installation / ☐Partial Check Metering
Meter Details:
Meter Serial No. / Meter Make & Model / Pattern Approval Cert No. / Meter Class Accuracy / Is Meter Bi-Directional / Current Rating / Meter Test Results
☐Yes ☐No / ____ Amps / ☐Attached
Current Transformer (CT) Details:
CT Serial No.: / CT Ratio’s Available: / CT Connected Ratio:: / CT Burden (Rated):: / CT Class: / CT Test Results:
______VA / ☐Attached
______VA / ☐Attached
______VA / ☐Attached
Voltage Transformer (VT) Details:
VT Arrangement:: / ☐3 x 1Ph VT or ☐3Ph VT
VT Serial No.: / VT Ratio: / VT Burden (Rated):: / VT Class: / VT Test Results:
_____KV / ___V / ______VA / ☐Attached
_____KV / ___V / ______VA / ☐Attached
_____KV / ___V / ______VA / ☐Attached

Please refer to Generator Registration Guide for further clarification on the information required for the Connection Point Checklist.

2.Attachments

Please provide (where required) the following attachments to the Connection Point Checklist:

  • Logical NMI – Algorithm
  • Single Line (Schematic)
  • Detailed Wiring diagram of the Metering Installation
  • Distribution or transmission area drawing
  • Distribution Loss Factor from the Australian Energy Regulator (AER).
  • Meter Test Result
  • Current Transformer Test Results
  • Voltage Transformer Test Results

– End of Application –

Application by Transferor for Transfer of Registration as a Generator in the NEM

August 20161