Shenzhen Fengrunda Technology Co.,Ltd

AC-100 User Manual

VER: V1.0

2016/03/28

Product Introduction

AC-100 is the AP central management product, It can central issued the configuration,central management AP,one key issued in the cloud-end, then realize the local deployment quickly.

1.1 Feature

Ø 5 10/100M RJ-45 port, 1 WAN&4 LAN.

Ø Support the max.300Mbps, it has the self-adaptive of speed rate function and auto adjust the wireless transmission speed rate.

Ø Support IEEE 802.11n,IEEE802.11b、IEEE802.11g

Ø Support AP central managment, wireless configuration issued, the cloud-end configuration issued, wireless status query, central re-start, timing re-start, batch upgrading.

Ø Support the router and look on multiple access mode.

1.2 Package Content

Ø AC-100 units;

Ø Guarantee card;

Ø User manual;

Product Installation

2.1 Installation Enviroment

AC-100 installation should abide by the principle:

1.Keep away from the hot object

2. Pls don’t install AP to the humid places.

3. Installation for indoor.

2.2 Port Description

AC-100 port description as below, pls refer to use.

1、RESET, press 5-10s to realize system reset.

2、WAN port support PPPOE, dynamic IP, static IP.

3、LAN port, 10/100M RJ-45 port connect with computer to realize the surf internet.

4、1 USB 2.0 port use for keep log and 3G access.

5、DC power port , externally connect 12V/1A power adapter.

Configuration Guide

3.1 Log in

1. Using the network cable directly connect to the PC and AC-100, then configuration the network segment of 192.168.1.X and the corresponding subnet mask.

2. Go into the internet explorer, enter http://192.168.1.1

3. If the access architecture of AC-100 as the above topology, PC directly connect with POE switch, using wireless search tool Discovery.rar to start initializeation configuration, after download, double-click Discovery.exe.(Discovery.rar can be download from the RUNDATA cloud AC management software interface, The link as below:http://wifi.poetech.net after register and log in or http://pan.baidu.com/s/1i30GiW1, user can download.)

4. After open this, it can auto search all of the”RUNDATA” wireless AC device in the network segment.

5. Pls double-click go into the router configuration, if the IP of the local units is not 192.168.1.x network segment, it will display a hint need to change IP.

6. If the IP of PC configuration is in the network segment of 192.168.1.X, double-click IP, it will appear the log in interface, the first time log in need to enter user name and passward, the default username and passward is admin.

3.2 AC-100 Configuration

3.2.1 AC-100 Log in

User directly go into the AP page after log in, as follow:

3.2.2 AC-100 Management

User can view the system status of AP and central configuration, the cloud configuration of AP and re-start and realize the central query management function in the “Device management” menu with the AC-100 management interface. Remark: AC-100 can scan all of AP in the Local area network, when user need to central management configuration AP, the AC-100 can not manage AP until the AC and the AP in the same local area network. Pls use Google or Firefox explorer.

3.2.2.1 【Device Management】-【AP Status】view the system status of the current AP.

3.2.2.2 【Device Management】-【Wireless Configuration】 batch wireless configuration or single wireless configuration, wireless SSID, communication channel, encrypt for the AP.

3.2.2.3 【Device】-【Cloud AC】realize the local double AC management , It is convenience for user to realize the remote management through the cloud-end issued configuration.

3.2.2.4 【Device】-【Restart】realize the batch restart function of the AP.

3.2.3 AC-100 (LAN)

3.2.3.1 【(LAN)】-【Internal address setup】set the management address of AC-100, that’s the Lan port management address of AC-100.

3.2.3.2 【(LAN)】-【DHCP】set DHCP server configuration of the AC-100 LAN port, through assign the IP of the AC-100 Lan port,If the Local area network has other DHCP server, the AC-100 DHCP server can close.

3.2.3.3 【(LAN)】-【Routing setup】set the AC-100 LAN routing list can realize the layer 3 routing function.

3.2.3.4 【(LAN)】-【Switch Control】realize the switch’s advanced function before setting the AC-100 LAN port.

3.2.4 AC-100 (WAN)

3.2.4.1 【(WAN)】-【Internet setup】set the AC-100 WAN surf the internet method, PPPoE is dynamic IP or static IP.
Remark: The IP of the LAN and the WAN can not be in the same network segment

3.2.5 AC-100 Fireware upgrade

3.2.5.1 【Fireware upgrade】