RUPTURE DISCS:
Opti-Gard
Disc:
Oseco Type Opti-Gard, XX” Reverse Operating Rupture Disc. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range 0%. Can Operate up to 95% of Burst Pressure. Non-Fragmenting Design. Material of Construction is 316 SS. Full Vacuum Service. Individually Boxed.
Holder:
Oseco Type Opti-Gard Disc Holder. Holder is Flat Seat, Material is 316 SS Inlet x 316 SS Outlet. Bolts Between Standard ANSI Flanges.
Sensor:
Oseco Type Flo-Tel+ Sensor for Disc Burst Indication. Non-Invasive Design, No Contact with the Process, Reusable, IP 65-rated.
STD:
Disc:
Oseco Type STD, XX” Standard Pre-Bulged Rupture Disc. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range +XX%/-XX%. Can Operate up to 70% of Burst Pressure. Possible Fragmenting Disc. Material of Construction is 316 Stainless Steel. Individually Boxed.
………………………………………………………………………………………$ Net USD Each
Holder:
Oseco Type RDI, XX” Insert Rupture Disc Holder with 30 Degree Angular Seat. 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
……………………………………………………………………………………….$ Net USD Each
Disc:
Oseco Type STDV, XX” Standard Pre-Bulged Rupture Disc with Vacuum Support. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range +XX%/-XX%. Can Operate up to 70% of Burst Pressure. Withstands Full Vacuum. Possible Fragmenting Disc. Material of Construction is 316 Stainless Steel. Individually Boxed.
……………………………………….………………………………………………$ Net USD Each
Holder:
Oseco Type RDI, XX” Insert Rupture Disc Holder with 30 Degree Angular Seat. 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
………………………………………………………………………………….……$ Net USD Each
CO:
Disc:
Oseco Type CO, XX” Composite Rupture Disc. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range +XX%/-XX%. Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Can Operate up to 80% of Burst Pressure. ASME UD Stamped and Individually Boxed.
………………………………………………………………………………………$ Net USD Each
Holder:
Oseco Type RDI, XX” Insert Rupture Disc Holder with 30 Degree Angular Seat. 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
………………………………………………………………………………...……$ Net USD Each
Discs:
Oseco Type COVT, XX” Composite Rupture Disc with Vacuum Support and Non-Fragmenting Design. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range +XX%/-XX%, Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Can Operate up to 80% of Burst Pressure. ASME UD Stamped and Individually Boxed.
…………………………………….……………………………………………….$ Net USD Each
Holder:
Oseco Type RDI, XX” Insert Rupture Disc Holder with 30 Degree Angular Seat. 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
…………...………………………………………………………………………..$ Net USD Each
OPTION: (Flat Seat Disc and Holder):
Discs:
Oseco Type FCOVT, XX” Flat Composite Rupture Disc with Vacuum Support and Non-Fragmenting Design. Set Pressure XX PSIG @ XX Degrees F. Manufacturing Range +XX%/-XX%. Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Can Operate up to 80% of Burst Pressure. ASME UD Stamped and Individually Boxed.
…………………………………………………………………………………….$ Net USD Each
Holder:
Oseco Type FRDI XX” Insert Rupture Disc Holder with Non-Torque Flat Seat. 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
..…………………………………………………………………………………..$ Net USD Each
FAS:
Disc:
Oseco Type FAS, XX” Forward Acting Scored Rupture Disc. Set @ XX PSIG @ XX Degrees F, 0% Manufacturing Range. Material of Construction is 316 Stainless Steel. Non-Fragmenting Design. Can Operate up to 90% of Burst Pressure and Withstand Vacuum. ASME UD Stamped and Individually Boxed.
………………………………………………………………………………….…$ Net USD Each
Holder:
Oseco Type FRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………………………………………………….……………………………$ Net USD Each
Disc:
Oseco Type RFAS, XX” Forward Acting Scored Rupture Disc with Support Ring. Set @ XX PSIG @ XX Degrees F, 0% Manufacturing Range. Material of Construction is 316 Stainless Steel. Non-Fragmenting Design. Can Operate up to 90% of Burst Pressure and Withstand Vacuum. ASME UD Stamped and Individually Boxed.
……..………………………………………………………………………………$ Net USD Each
Holder:
Oseco Type FRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………………………………………………………………..………………$ Net USD Each
Disc:
Oseco Type FASL, XX” Forward Acting Scored Rupture Disc with Teflon Liner on Process Side. Set @ XX PSIG @ XX Degrees F. 0% Manufacturing Range. Material of Construction is 316 Stainless Steel with Teflon, Non-Fragmenting Design and Withstands Full Vacuum. Can Operate up to 90% of Set Pressure. ASME UD Stamped Individually Boxed.
.,………………………………………………………………………...…………$ Net USD Each
Holder:
Oseco Type FRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………………………………………………………………………..………$ Net USD Each
PRO+:
Disc:
Oseco Type PRO+, XX” Precision Reverse Operating Rupture Disc. Set @ XX PSIG @ XX Degrees F. 0% Manufacturing Range. Material of Construction is 316 Stainless Steel, Non-Fragmenting Design and Withstands Full Vacuum. Can Operate up to 95% of Burst Pressure. ASME UD Stamped and Individually Boxed.
………..………………………………………………………………….…………$ Net USD Each
Holder:
Oseco Type PRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………..………………………………………………………………………$ Net USD Each
PCR:
Disc:
Oseco Type PCR, XX” Precision Cross Scored Reverse Buckling Rupture Disc. Set @ XX PSIG @ XX Degrees F/XX PSIG @ XX Degrees F. 0% Manufacturing Range. Operates up to 90% of Burst Pressure. Material of Construction is 316 Stainless Steel, Non-Fragmenting Design and Withstands Vacuum. ASME UD Stamped and Individually Boxed.
……..…………………………………………………………………………..$ Net USD Each
Holder:
Oseco Type PRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………..……………………..……………………………………………$ Net USD Each
PLR:
Disc:
Oseco Type PLR, XX” Precision Low Pressure Reverse Buckling Rupture Disc. Set @ XX PSIG @ XX Degrees F, 0% Manufacturing Range. Can Operate up to 90% of Burst Pressure. Material of Construction is 316 Stainless Steel, Non-Fragmenting Design and Withstands Vacuum. ASME UD Stamped and Individually Boxed.
……………………………………………………………………….…………$ Net USD Each
Holder:
Oseco Type PRDI, XX” Flat Seated Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………..……………………..……………………………………………$ Net USD Each
Opti-Gard
Disc:
Oseco Type Opti-Gard, XX” Reverse Operating Rupture Disc. Set @ XX PSIG @ XX Degrees F, 0% Manufacturing Range. Can Operate up to 95% of Burst Pressure. Material of Construction is 316 Stainless Steel, Non-Fragmenting Design and Withstands Vacuum. ASME UD Stamped and Individually Boxed.
……………………………………………………………………….…………$ Net USD Each
Holder:
Oseco Type Opti-Gard, XX” Rupture Disc Holder. Non-Torque Sensitive Design. Material of Construction is 316 Stainless Steel Inlet x 316 Stainless Steel Outlet. Made from Bar Stock not Casting. Bolts Between Standard ANSI Flanges.
……………..……………………..……………………………………………$ Net USD Each
Sensor:
Oseco Type Flo-Tel+ Non-invasive Burst Detection Sensor. Simple Reed-Switch and Magnetic Technology for Burst Detection. No Contact with Process. Reusable Sensor. Supplied with 2 Meter Cable.
……………..……………………..……………………………………………$ Net USD Each
FLCO / FLCOS:
Disc:
Oseco Type FLCO, XX” Flat Bi-directional Rupture Disc. Set @ XX PSIG @ XX Degrees F. Manufacturing Range +/-XX PSIG. Can Operate up to 50% of Burst Pressure. Material of Construction is 316 Stainless Steel with Teflon Liner on Both Sides with Built in 1/16” Non-Asbestos Gaskets. Fits Between ANSI RF Flanges. Individually Boxed.
…………………………………………………………………………….$ Net USD Each
OPTION: (Disc with Integral Burst Sensor):
Oseco Type FLCOS, XX” Flat Bidirectional Rupture Disc with Built-In Sensor and 2 Prong Connector and Mating Plug. Set @ XX PSIG @ XX Degrees F. Manufacturing Range +/-XX PSIG. Can Operate up to 50% of Set Point. Material of Construction is 316 Stainless Steel with Teflon Liner on Both Sides with Built in 1/16” Thick Non-Asbestos Gaskets. Fits Between ANSI RF Flanges. Individually Boxed.
………………………………………………………………………….….$ Net USD Each
VAPRO / POSIPRO:
Disc:
Oseco Type VAPRO, XX” Dual Acting Rupture Disc. Pressure Set @ XX PSIG (Range between +XX PSIG and +XX PSIG) @ XX Degrees F and Vacuum Set –XX” WC (Range between –XX” WC and –XX” WC) @ XX Degrees F. Can Operate Within 1” WC or up to 90% of Vacuum Burst Pressure and 80% of Burst Pressure. Material of Construction is 316 Stainless Steel Top Section and Girdle and a Fluoropolymer Seal.
…………………….………………………….……………………….……$ Net USD Each
Holder:
Oseco Type VRDI, XX” Insert Rupture Disc Holder with Precision Knife Blades Welded in the Inlet of the Holder. Material of Construction is 304 Stainless Steel Inlet with 17-7 PH Stainless Steel Knife Blades x 304 Stainless Steel Outlet. Bolts Between Standard ANSI Flanges.
.................................................................................................$ Net USD Each
Disc:
Oseco Type POSIPRO, XX” Dual Acting Rupture Disc. Pressure Set @ XX PSIG (Range between +XX PSIG and +XX PSIG) @ XX Degrees F and Vacuum Set –XX” WC (Range between –XX” WC and –XX” WC) @ XX Degrees F. Can Operate Within 1” WC or up to 90% of Burst Pressure and 80% of Vacuum Burst Pressure. Material of Construction is 316 Stainless Steel Top Section and Girdle and a Fluoropolymer Seal.
………………………………………………………………………………$ Net USD Each
Holder:
Oseco Type POSI, XX” Insert Rupture Disc Holder.
………………………………………………………………………………$ Net USD Each
GR / GRAPHITE DISCS:
Discs:
Oseco Type GR, XX” Flat Graphite Replacement Bi-Directional Rupture Disc. Set @ XX PSIG with No Vacuum Support for 30 PSIG and Up. Standard 0% Mfg Range. Can Operate up to 60% of Burst Pressure. Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Non-Fragmenting Design. ASME UD Stamped and Individually Boxed.
…………………….…………………………………………………………….$ Net USD Each
No Holder is Required.
Oseco Type GRO, XX” Flat Graphite Replacement Bi-Directional Rupture Disc with Valox 420 Spacer (non-reusable). Set @ XX PSIG with No Vacuum Support for 30 PSIG and Up. Standard 0% Mfg Range. Can Operate up to 60% of Burst Pressure. Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Non-Fragmenting Design. ASME UD Stamped and Individually Boxed.
…………………….…………………………………………………………….$ Net USD Each
No Holder is Required.
Oseco Type GRR, XX” Flat Graphite Replacement Bi-Directional Rupture Disc with Stainless Steel Spacer (reusable). Set @ XX PSIG with No Vacuum Support for 30 PSIG and Up. Standard 0% Mfg Range. Can Operate up to 60% of Burst Pressure. Material of Construction is 316 Stainless Steel/Teflon/316 Stainless Steel. Non-Fragmenting Design. ASME UD Stamped and Individually Boxed.
…………………….…………………………………………………………….$ Net USD Each
No Holder is Required.
TRANSPORTATION DISCS:
Oseco Type HC-RC, for Standard Railcar Safety Vents. Bidirectional Design, Material of Construction is Ryton, Optional Fluoropolymer Liners.
…………………………………………………………………………….$ Net USD Each
Oseco Type HCL-RC, For Rubber Lined Tank Cars. Bidirectional Design, Material of Construction is Ryton, Fluoropolymer Gaskets/Liners.
…………………………………………………………………………….$ Net USD Each
Oseco Type CRC, Composite Rail Car, for Standard Railcar Safety Vents. Stainless Steel Centering Ring. Steel Vacuum Support. Material of Construction is Inconel with Fluoropolymer Seals/Gaskets.
…………………………………………………………………………….$ Net USD Each
Oseco Type ICD, High Performance Score Disc for Intermodal Containers. Non-Fragmenting Design. Material of Construction is Nickel with Stainless Steel Rings.
…………………………………………………………………………….$ Net USD Each