Summary of BV200 8-3 software 8 December 2017
8-3 software changes
Version / Date / New functionality / Other changes / Bug fixes /8-3i / 8 Dec 17 / · Added tickboxes for LOW, HIGH, CONTROL to 7-day screen
· Added facility to edit an UNKNOWN barcode on the 7-day window
· Added facility to edit an UNKNOWN barcode on the Operator Action window
· Added column for Count on 7-day screen
· Added column for Count on Operator Action screen
· Added popup for matching barcodes instigated from 7-day window
· Added popup for matching barcodes instigated from Operator Action window
· If any Unknown barcodes are present the UNKNOWN tag is automatically displayed
8-3h / 27 Nov 17 / · Ability to edit patient barcodes in the 7-day results window. If the barcode has already been sent to LIMS it will be resent.
8-3g / 20 Nov 17 / · Ability to move UNKNOWN records from 7-day data to historical data / · Schematic home position highlighted with red box / · LIMS approval/rejection columns not always displayed on Operator Action tab
8-3f / 11 Sept 17 / · Trap conveyor not moving from Test to Wash
8-3e / 20 July 17 / · Ability to process high PV CONTROL samples (PV25 of 3, 4, 6, and 10).
· Ability to configure if and when CONTROL samples are retested
· Ability to turn on or off processing of CONTROL samples
· Ability to resample until all used up on non-PV testing
· Ability to send CHECK, LOW, HIGH, or CONTROL results to LIMS / · Additional trapping of spurious VN messages
· Daily and Monthly Usage reports now include current day figures
· Removal of 22 digit calibrant processing
8-3d-2 / 10 April 17 / · Corrected repeated cassette removed message
8-3d / 6 April 17 / · Facility to export to spreadsheet from View Maintenance records
8-3c / 13 Mar 17 / · Corrected comms port configuration in Customer Configuration Utility
8-3b / 30 Jan 2017 / · Changed baseline for programs from .NET 4.5.1 to .NET 4 Client Profile, to avoid problems with installing on locked-down PCs
8-3a / 19 Jan 2017 / · Minor changes to menu displays
· Calibrant expiry date adjusted
· Upgrade program did not handle 2 tables correctly.
8-3 / 20 Dec 2016 / · Main screen with tabs - popups and separate windows have been replaced by tabs.
· A new feature is that one tab contains information that the operator needs to take action on – approving/rejecting release of results to LIMS, or to enter a barcode not correctly read (shown as UNKNOWN). Typically, this area will empty.
· Uncertainty analysis reports are available in addition to Levey-Jennings reports.
· There are several new options for handling CHECK failure (PV outside 5% of expected). Changes to this are only available to the Benson engineer whilst the effect of this feature is understood in the field. Typically, if a CHECK fails the system will go back to the last good CHECK to retest that, then return to the failed CHECK. This should confirm whether the system is out of calibration, or if that particular tube of CHECK fluid was contaminated.
· The software is licenced.
· Access to the Customer Utility is available from the main program.
· Access to areas of the program is controlled by the level of user – there are 3 levels of user – Operator, Maintenance, and Manager. / · Cleaning enforced to be done in order of Monthly, Weekly, Daily
· Monitoring of cassette removal.
· Monitoring of sump draining. / · None
Page 3 of 3