1

2894 Bonito Avenue, Grand Junction, CO 81505 ● Phone 970-260-2435 ● Fax 970-245-3008

Website: ● Email:

THREE BIN PORTABLE PUGMILL PLANT

The Pugmill is a heavy duty continuous mixer, built for long trouble free life. The mixing shafts are large diameter solid steel “thru-shafts” with box enclosure. The box enclosure gives a large flat surface to weld on the paddle shanks. High chrome cast iron tips are bolted onto the shanks; tips are reversible for wear. Contour liners are ¼” AR235 plate. The pugmill box is ¼” plate mounted on a wide flange beam frame, with motors mounted on a ¾” plate cross member. The pugmill assembly is welded together, with a bolted-on discharge end, for ease of shaft/bearing replacement. Large paddle tips, mixer length, shaft speed, travel circle, tip angle, and horsepower combine to give an excellent mix. Heavy duty double tapered roller bearings in pillow blocks are mounted on the drive end, with outboard mounted ball bearings on the carrier end. Each shaft is powered by its own electric motor and reducer, eliminating the need for timing gears. All replacement parts are available from bearing supply companies, except the paddle tips.

1 - New Portable Pugmill Plant including:

3 - Feed Hoppers *1/4” Plate *8’ x 12’ top opening *Adjustable discharge gate

3 - Belt Feeders *24” Conveyor belts *7 ½ HP Electric motors *Shaft mount reducers

1 - Collecting Conveyor *30” Conveyor belts *10 HP Electric motor *Shaft mount reducer

1 - Incline Conveyor *30” Conveyor belt *10 HP Electric motor *Shaft mount reducer

1 - New 100B PUGMILL with Twin-Shaft Twin-Drive *2 - 15 HP motors (TEFC 230/460 3 phase 60Hz) *Shaft mount reducers, Dodge *Hinged cover over mixing chamber *Receiving hopper*Contour liner (AR235 plate) *Hi-chrome paddle tips, reversible for wear *Belt guards *Bolt on discharge end plate Capacity will vary in relation to size and type of material being mixed.

1 – New ELECTRICAL SYSTEM with CONTROL PANEL *Motor starters *Circuit breakers *Main disconnect *Push button controls *Wiring system with plug connectors *Start-up warning horn

1 – New 5th Wheel TRAILER with tandem axle, air brakes, lights, front and rear trailer jacks.

Price ……………………………….. $ 211,763.00

Options: Electric Vibrator Price ……………………………….. $ 1,929.00

100KW Diesel Electric Generator Set Price …………………. $ 36,875.00

Note: We do not warrant that our guards will meet all local codes. It is the responsibility of the end user to have them checked by a local inspector.

Terms: 50% deposit, 50% due when unit is ready at factory (Subject to Conditions of Sale

Delivery: 10 to 12 weeks after receipt of deposit, F.O.B.:Factory