Page 3 of 3
Title / Manufacture and install timber and sheet panelling
Level / 4 / Credits / 7
Purpose / People credited with this unit standard are able to manufacture timber and sheet panelling, and assemble and fix timber and sheet panelling.
Classification / Joinery > Cabinetry
Available grade / Achieved
Explanatory notes
1 All workplace practices must comply with current legislation, codes of practice, and documented site safety procedures for personal, product, and worksite safety.
2 Legislation and regulations relevant to this unit standard include but are not limited to – Health and Safety in Employment Act1992; Health and Safety in Employment Regulations 1995.
Outcomes and evidence requirements
Outcome 1
Manufacture timber and sheet panelling.
Evidence requirements
1.1 The panelling is identified from the working drawings.
1.2 The quantity of material needed is calculated and an order is placed in accordance with workplace practice.
1.3 Site conditions are inspected, measured, and documented in accordance with workplace practice.
1.4 Panels and mouldings are set out and machined to conform to the working drawings.
1.5 Panels and mouldings are finished to conform to the requirements of the specifications.
Outcome 2
Assemble and fix timber and sheet panelling.
Evidence requirements
2.1 On-site conditions are checked in accordance with workplace practice, and prepared to receive panelling.
2.2 Fixing methods are identified from the working drawings.
2.3 The quantity of fixings needed is calculated and an order is placed in accordance with workplace practice.
2.4 Panelling and mouldings are fixed to the carcase or frame to conform to the requirements of the working drawings and specifications.
2.5 Trimming, finishing, and protection of the panelling are completed in accordance with workplace practice.
Replacement information / This unit standard, unit standard 2522, unit standard 2535, unit standard 25159, unit standard 25602, and unit standard 25604 have been replaced by unit standard 28224.This unit standard is expiring. Assessment against the standard must take place by the last date for assessment set out below.
Status information and last date for assessment for superseded versions
Process / Version / Date / Last Date for Assessment /Registration / 1 / 16 August 1995 / 31 December 2018
Revision / 2 / 24 October 1995 / 31 December 2018
Revision / 3 / 16 August 1995 / 31 December 2018
Revision / 4 / 16 August 1995 / 31 December 2018
Revision / 5 / 21 October 1997 / 31 December 2018
Revision / 6 / 20 December 1999 / 31 December 2018
Revision / 7 / 16 June 2005 / 31 December 2018
Review / 8 / 23 January 2009 / 31 December 2018
Review / 9 / 24 October 2014 / 31 December 2018
Rollover / 10 / 17 September 2015 / 31 December 2018
Consent and Moderation Requirements (CMR) reference / 0073
This CMR can be accessed at http://www.nzqa.govt.nz/framework/search/index.do.
Please note
Providers must be granted consent to assess against standards (accredited) by NZQA, before they can report credits from assessment against unit standards or deliver courses of study leading to that assessment.
Industry Training Organisations must be granted consent to assess against standards by NZQA before they can register credits from assessment against unit standards.
Providers and Industry Training Organisations, which have been granted consent and which are assessing against unit standards must engage with the moderation system that applies to those standards.
Requirements for consent to assess and an outline of the moderation system that applies to this standard are outlined in the Consent and Moderation Requirements (CMR). The CMR also includes useful information about special requirements for organisations wishing to develop education and training programmes, such as minimum qualifications for tutors and assessors, and special resource requirements.
Building and Construction Industry Training OrganisationSSB Code 101562 / Ó New Zealand Qualifications Authority 2015 / / New Zealand Qualifications Aut