研发部R&D
一．磁体工程师Magnet engineer:
Responsibility:
1.Carry out electromagnetic design and analysis forMRI superconducting magnet and permanent magnet development
2.Carry out verification & validation of new design by calculation or prototype build
3.Coach the identified local suppliers to manufacture the magnet components to the required level
4.Job related documents according to company working process
Competencies:
1.Electromagnetic field design of superconducting magnet and permanent magnet
2.Good knowledge on physics, electromagnetic field and superconductivity
3.Good skills on numerical analysis and programming
4.Good skills in coaching external suppliers to meet quality standard required
5.Good self learning ability
Position request:
1.Master or PhD degree in physics, superconductivity, electromagnetic filed or electrical engineer.
2.Cooperatewith English speaking colleaguesofinternational team
Good team player
3.High energy, good resistance to stress in certain phase of program needed
4.Experience in superconducting magnet development is an advantage
二．低温超导设计工程师Cryostat design engineer ：
Responsibility
1.Work closely with internal and external staff to produce and implement cryogenic designs for project
2.Job related documents according to company working process
3.Coach the identified local suppliers to manufacture the cryogenic components to the required level
Competencies:
1.Thermal & Structural design of cryogenic components
2.Heat Transfer Analysis, inc. heat load management
3.Design and validation of cryogenic instrumentation
4.Excellent working knowledge of engineering drawings
5.Excellent experience of a CAD system
6.FEA and/or CFD experience
7.Good working knowledge of manufacturing process
8.Excellent skills in coaching external suppliers to meet quality standard required
9.Good self learning ability
Position request:
1.Master or PhD degree in Cryogenics
2.Cooperatewith English speaking colleaguesofinternational team
3.Good team player
4.High energy, good resistance to stress in certain phase of program needed
Experience in superconducting magnet development is an advantage
三．电磁场分析工程师（Electromagnetic Analysis Engineer）:
Responsibilities:
1. Electromagnetic design and analysis
2. Numerical analysis and programming
Competencies:
1. Technologies Electromagnetic
2. Technologies mathematics and physics
3. Methods programming (C++)
Position Request:
Doctor’s degree in Electromagnetic or Physics. Large scale electrical motor, electrical device, magnet, superconductive equipment is priority.
四．软件开发工程师SW-Developer (UI-Development):
Responsibilities:
1. Develop high quality software components for MR examination workflow and clinical application specified package;
2. Analyze the requirement and write functional and design specifications.
Competencies:
1. SW-development on windows
2. Experience with RUP, UML, Design Pattern, OOA/OOD, SW-Frameworks
3. Profound Knowledge in C/C++
4. Job specific knowledge be good at English
5. Job specific knowledge the MFC, OLE, DCOM/COM, Middleware
6. Job specific knowledge medical communication protocol knowledge of DICOM, HL7 and HIS,RIS,PACS system domain knowledge
7. Job specific knowledge Image post processing
Position Request:
Master degree on CS(Computer Science), EE(Electricity and Electronic engineering) and BME(Bio-Medical Engineering). Cooperate with English speaking colleagues in an international team.
>Desirable: experience working in SW-project.
五．软件开发工程师SW-Developer :
Responsibilities:
1. Design of software for peripheral components inside a MR system.
2. Software design concerning control, supervision and configuration aspects inside the MR system.
3. Integrate and validate the software and hardware components.
4. Specify and design SW-components related to physics to assure the correct function of the system.
5. Developing object oriented in C++ based on 32 bit Windows XP and Linux 64 bit.
6. Describe configuration and service related software workflow in XML.
Competencies:
1. SW-development with windows XP
2. Experience with UML, Design Pattern, OOA/OOD,SW-Frameworks
3. Profound Knowledge in C/C++
4. Knowledge about Java
5.Knowledge about XML
6. Knowledge experience with Linux
7. Knowledge physical background
8. Good English speaking and writing
Position Request:
Master degree on CS(Computer Science), EE(Electricity and Electronic engineering) . Collaboration with English speaking colleagues inside an international team.
>Desirable: experience working in SW-project.
六．硬件设计工程师 Hardware Design Engineer:
Responsibilities:
1.Electrical device improvement, localization, testing and debugging;
2.Electronics module or interfaces development;
3.Electronics firmware and hardware development;
4.Production/R&D test instruments development;
5.Relevant technical paper preparation;
Competencies:
1.high speed electronics design and PCB layout skill;
2.embeded system programming with C/C++,assembly CAN2.0/CANopen as well as CAN analysis tools;
3.FPGA/CPLD,digital and analog circuit design;
4.Master of VHDL/verilog HDL and relevant SW tools;
5.EMC background, familiar with electronics components;
6. Good English speaking and writing.
Position Request:
Master degree on communication, electrical technology, automation. Collaboration with English speaking colleagues inside an international team.
Desirable: experience working in CANOpen protocol application.
七．机械设计工程师（Mechanical Design Engineer）:
Responsibilities:
1.Structural integration of electronical equipment: layout and fixing design of electronical components ,design of unit frame and cabinet,
2Cooling design of electronical equipment: energy consumption calculation and heat transfer analysis, realization of cooling technique(water-cooling);
Competencies:
1.Concept of mechanical design
2.Skill of CAD software
3.Experience of machining technology
Position Request:
1.Experience of electronical equipment structure design
2.Basis of computer aided analysis
3.EMC concept
4.Knowledge of UL,CE
5.Knowledge of heat transfer and cooling
6.Above 2 years project experience in radar engineering ,telecommunication engineering and relevant industry
7.Master degree inMechanical Engineering
八．射频研发工程师 (RF Component design Engineer):
Responsibilities:
1. RF component design (power amplifier, low noise amplifier, Hybrid etc.)
2. TX body coil and receive array coil design.
Competencies:
1. Electrical Circuit Theory
2. RF circuit and components
3. Antenna Theory
4. Software design (Matlab, VC++)
5. Project organization skill
6. Basic MRI background
Position Request:
Master degree or above, major in Electrical Engineering, Good English skills in Reading, Writing and Speaking.
九．磁共振临床应用开发工程师 （MRI Application Developer）:
Responsibility:
MRI application development, sequence and reconstruction;
Competencies:
1.Technologies sophisticated mathematics;
2.Technologies sophisticated physics;
3.Technolgies skillful computer knowledge.
Position Request:
Master’s degree in Biomedical-Engineering or Physics. Cooperate with English speaking colleagues in an international team.
十．磁共振临床应用专家 MRI Application Specialist:
Responsibilities:
MRI application development, protocol optimization.
Competencies:
1.Technologies clinical medicine;
2.Technoligies medical imaging;
3.Technologies computer knowledge;
Position Request:
Master’s degree in Clinical medical, Medical image .Cooperate with English speaking colleagues in an international team.
十一．磁共振系统工程师MR System Engineer:
Responsibilities:
1.Integration and integration test.
2.Creation of specifications at system level.
3.Contribution of the product risk analysis.
4.Ensuring the integrality, testability, reliability of the products at system level.
5.Standards and their measurements.
6.Process improvement
7.System know-how and contribution to system test and production.
8.System and requirement engineering.
9.Manage the integration and integration tests; Create the system level test specifications; Support the system test internal and the CPF evaluation for the projects; Support the collection of regulatory required certifactions/documents
Competencies:
1.Technologies sophisticated mathematics;
2.Technologies sophisticated physics;
3. Technolgies skillful computer knowledge.
Position Request:
1.Master degree or above on Physics or Electronics;
2.Good communication skill with other persons;
3.Can speak and write in English fluently.
十二． 磁共振用户文档工程师 MRI Customer Document Engineer:
Responsibilities:
1.To organize MRI Customer document and on line help writing;
2.To manage and control the document;
3.To control and improve the process;
4.To arrange and follow up the project;
5.To coordinate and cooperate the intern and outside suppliers;
6.To be responsible for the document's translation and edit.
Capabilities:
1.Technologies sophisticated physics;
2. Technolgies skillful computer knowledge.
3.Fluent in English
Position Request:
Master’s degree in Biology medical engineering or Physics. Cooperate with English speaking colleagues in an international team.
十三．软件测试工程师 SW Test Engineer
Responsibilities:
1.Development of automatic test script according to function requirement, maintance and update automation script.
2.Perform SW Integration Test, System Integration Test, System Test and
Customer Approval;
3.Support other department the request of automation test aid.
Competencies:
1. Test methods
2. Software development and corresponding procedures
3. Automatic software test tools
4. Basic knowledge about C++
5. Script language, e.g. perl, java script, etc.
6. development automation script ability
Position Request:
1. well knowledge on Object-oriented developemnt;
2. At least 1 years experience in C# programming language;
3.Master degree on Computer scientist, physicists with profound informatics.
十四．磁共振临床应用市场专员 MRI Application Marketing Specialist:
Responsibilities:
1.Product specific plan
2.Marketing specific plan
3.Application specific plan
4.Product introduction
5.Technical support
6.Conference contents
Competencies:
1.MRI Basic / MRI Scanning
2.Clinical General
3.Communication Skills / English Skills / Computer Skills
4.Marketing Skills
Position Request:
Master’s degree in Clinical medical, Medical image . Cooperate with English speaking colleagues in an international team.
十五．磁共振安装工程师 MRI Installation Engineer:
Responsibility:
1.Install whole SIEMENS MRI system on customer site by professional technical skill to
install high quality production for customer;
2.Handling service call and customer complaints by monitoring system performance in
installation base to improve customer satisfaction;
3.Monitoring SMMR product during installation to perform technical support for
customer site
Competencies:
1.Skillful in measuring instrument;
2.Technologies in MRI;
3.Good communication skill;
Position Request:
Bachelor degree in Electronic Engineering, Electrical Engineering or Biomedical-Engineering.
生产工艺部PE
十六．低温／真空工程师(生产工艺)Cryostat/Vacuum Engineer(PE):
Responsibilities:
1.Responsible for 1.5T Magnet assembly(efficiency, cost, quality)
2.Preparing and maintenance of production documentation
3.Support new 1.5T Magnet develop, design and maintenance tooling
4.Establish production process for new 1.5T Magnet
Competencies:
1.Specific knowledge on assembly functionality
2.Mechanics background
3.Tooling design
4.AUTOCAD, I-DEAS software skill
5.Technology for cryostat
6.Technology for vacuum
7.Technology for superconductor
Position Request:
Cryostat/Vacuum experience in design or process engineering, be able to use AUTOCAD or I-DEAS to make design, knowledge about coil impregnation, vacuum, superconductor, etc.
十七．焊接检测工程师 Welding inspection Engineer:
Responsibility:
responsible for the Helium Vessel and OVC welding inspection;
Requirement:
1.Experience in pressure vessel welding inspection;
2.Experience in PT and RT of pressure in line with AD2000 and GB150;
3.Experince in pressure vessel vessel welding manufacture;
4.Qualifications to EN473 and Chinese regulations are preferred;
Capabilities:
Bachelor degree or above, major in WeldingWelding inspection, can communicate with other partners in English.
十八．机电工程师(生产工艺)MechanicalElectronic Engineer(PE):
Responsibilities:
1.Responsible for 1.5T Magnet assembly(efficiency, cost, quality)
2.Preparing and maintenance of production documentation
3.Support new 1.5T Magnet develop, design and maintenance tooling
4.Establish production process for new 1.5T Magnet
Competencies:
1.Specific knowledge on assembly functionality
2.Mechanics background
3.Tooling design
4.AUTOCAD, I-DEAS software skill
5.Technology for cryostat
6.Technology for vacuum
7.Technology for superconductor
Position Request:
Mechanics & electrics experience in design or process engineering, be able to use AUTOCAD or I-DEAS to make design, knowledge about coil impregnation, vacuum, superconductor, etc.
E-mail: